Tactile letter recognition under different modes of stimulus presentation

Block capital letters were displayed to experienced and inexperienced Ss, using a 20 x 20 matrix of vibratory tactors placed against the back. In two separate experiments, a total of five modes of stimulus presentation, three of them employing a linear scanning slit, were studied. The poorest method, stationary flashing of the letter, allows performance that is well above chance, implying that a purely spatial presentation does convey information. Performance is improved when the letter is moved horizontally across the display. The best performance is achieved when the amount of simultaneous stimulation is limited by using a linear scanning slit. In one method, the letter moves behind a stationary slit, with the result that its horizontal dimension is portrayed only in time. In the other two methods, the scanning slit moves across the stationary letter, portraying the letter both in time and in space. The results of all five display modes indicate that Ss can use whichever representation, spatial or temporal, is available, although patternings which most closely approximate sequential tracing by a single moving point lead to the highest recognition accuracy. We interpret these results in terms of the limited spatial resolution of the cutaneous sense. While the perception of a letter presented in either full-field condition is limited by the spatial resolution, the best measure being the two-point limen, the perception of a letter traced sequentially is limited by the localization acuity of the cutaneous sense, the best measure being the “error of localization,” which is known to be considerably smaller than the two-point limen. Inasmuch as the slit methods of presentation are a compromise between simultaneous and sequential display, letter-recognition accuracy is better with slit presentation than with the corresponding full-field mode of display.