BEHAVIOR ANALYSIS APPLIED TO ENVIRONMENTAL/ECOLOGICAL PROBLEMS; A REVIEW1

Recent applications of operant technology, including the manipulation of environmental conditions and response consequences, have been directed toward the improvement of man-environment relations. This document summarizes the research designs, procedures, results, and conclusions of these recent behavioral interventions for ecological rebalance. Each of the 32 studies reviewed was undertaken since 1970; all studies were relatively successful in changing the probability of an ecology-related response; all studies incorporated basic methodologies applicable for large-scale, community programs; most of the investigations were conducted in field settings (e.g., college campuses, grocery stores, mobile-trailer parks, homes, movie theaters, public campgrounds, and a football stadium). Several of the studies are as yet unpublished. Sources for receiving documentation of the unpublished research are provided in this document. About 50% of the investigations reviewed were designed to influence behaviors related to environmental litter; the others were of behavior-modification programs that substantially increased bus-ridership, decreased lawn-trampling, promoted the purchase of drinks in returnable rather than throwaway containers, initiated a recycling process, or reduced energy consumption. Essentially, the interventions were either preventive in nature (i.e., designed to discourage environment-destructive behaviors before they occur), or remedial (i.e., designed to encourage behaviors that correct an existing environmental problem). Usually, the preventive measures emphasized responses priming (or prompting), while the corrective measures applied some form of positive reinforcement. Response priming was accomplished with modelling techniques, or with written and/or verbal prompts presented either publicly or on a personal, one-to-one basis. Among the positive reinforcement procedures were field applications of token economies, lottery systems, feedback programming, and intergroup contests, as well as individual contingency contracting. Some experimental designs provided for comparisons between the behavioral effects of response priming and positive reinforcement.     

Facilitating paper recycling: effects of prompts, raffles, and contests

The effects of prompts and reinforcement to promote paper recycling were compared in six university dormitories. For a Prompt condition, residents were urged to recycle paper for ecological reasons via flyers distributed to each room. For a Raffle contingency, residents were given one raffle ticket for every pound of paper brought to a collection center. For a Contest contingency, two dorms were paired and the dorm whose residents delivered the most paper won $15 for its treasury. Contingency awareness was strengthened via a flyer placed under the door of each resident's room. Flyers alone had little effect in increasing paper-recycling behaviors, but the raffle (substantially) and the contest (somewhat) increased the amount of paper brought to a dorm's recycling center. Students whose rooms were closest to the collection center showed the greatest participation. Removal of the reinforcement contingencies resulted in a return to baseline levels.     

Contagion in the Representational Field of Water Recycling: Informing New Environment Practice Through Social Representation Theory

Water shortages in Australia have highlighted an urgent need for alternative water sources, and technologically, water recycling is argued to offer the most cost‐effective, environmentally sustainable solution to these shortages. Yet public support for its implementation is low even in the drought‐stricken areas of Australia. Drawing from the theory of social representations, this study addressed community perceptions of water recycling. Three interrelated methodologies were employed in a self‐report questionnaire. Individual difference scaling/multidimensional scaling analyses of three word association tasks revealed that the emergent social representation of water recycling was contradictory in affect. Normative responses indicated an awareness of the need to use recycled water whereas the functional responses were associated with a fear of contamination. An analysis of differential use scales further revealed that the perception of contagion was specific to when recycled water had contact with the body. The discursive analysis of respondents' comments expanded on both these findings. The study identified the themata of purity/impurity as underpinning the social understanding of water recycling. Copyright © 2011 John Wiley & Sons, Ltd.     

The effect of self‐identity alongside perceived importance within the theory of planned behaviour

Self‐identity often predicts behavioural intentions after standard theory of planned behaviour (TPB) components are accounted for. However, it has been claimed this is due to conceptual similarity between self‐identity and perceived importance of the behaviour. We examined this claim within the context of recycling food waste. Participants (N = 113) completed questionnaires assessing intentions, attitude, perceived behavioural control, perceived norms, perceived importance, self‐identity, and past behaviour. Confirmatory factor analysis indicated that self‐identity and perceived importance were distinct constructs. Further, after accounting for TPB components and perceived importance, self‐identity explained a significant amount of additional variance in intentions. The present findings therefore do not support this particular argument against the predictive utility of self‐identity.     

Structural relaxation and rejuvenation in a metallic glass induced by shot-peening

The metallic glass Pd₄₀Cu₃₀Ni₁₀P₂₀ in as-cast or pre-annealed states was shot-peened successively at room temperature or at 77 K. The structural state of the glass was characterized by the relaxation spectrum measured in a differential scanning calorimeter. Mechanically induced relaxation of the as-cast glass and mechanically induced rejuvenation of pre-annealed samples are both more evident at 77 K than at 298 K, enabling deductions about the underlying mechanisms. The relaxation spectrum of the glass as a function of temperature displays two broad maxima, which occurring at the higher temperature is attributed to the part of the free-volume distribution associated with flow defects. In samples shot-peened at 77 K, the stored energy after deformation can be as high as 20% of the cold work. Shot-peening simultaneously generates flow defects within shear bands and destroys them in the matrix between bands: whose effect dominates is principally dependent on the initial state of relaxation of the glass. Shot-peening of partially crystallized samples appears capable of breaking up and dispersing crystallites without inducing any further significant crystallization.     

Self-assembly-assisted growth of two-dimensional Penrose tiling

An algorithm for the growth of two-dimensional Penrose tiling, based on symmetry operations on a seed rhombus, is discussed and demonstrated. Independent of empirical matching rules, as suggested by Penrose [Bull. Inst. Math. Appl. 10 266 (1974)], and also overcoming the scaling-down operation, as proposed by Ramachandrarao et al. (Acta Crystallogr. A 47 210 (1991)], the present algorithm follows a mechanism akin to self-assembly and can be continued ad infinitum.     

Deformation twinning and plastic recovery in Cu/Ag nanolayers under uniaxial tensile straining

Molecular dynamics simulations of nanoscale multilayered Cu/Ag metals have been conducted under uniaxial tensile straining to elucidate the out-of-plane deformation behaviour relevant to tensile spallation experiments. In nanolayers with pristine architectures, plastic dissipation prior to crack nucleation is suppressed owing to the high hydrostatic tensile stress state. The presence of sources for micro-twinning partials, such as micro-cracks or columnar grain boundaries, result in abundant deformation twin lamellae across multiple Cu/Ag interlayers. Plastic recovery is observed during unloading of the nanolayers.     

Formation of FeNi with L10-ordered structure using high-pressure torsion

FeNi with the L1₀-ordered structure is formed over an astronomical timescale in meteorites. In this study, severe plastic deformation using high-pressure torsion (HPT) is employed for the production of the L1₀ structure in the laboratory. Its formation is confirmed by X-ray diffraction analysis and transmission electron microscopy. Processing of elemental nanopowders by HPT is an effective method for the formation of the L1₀ phase, which is enhanced by the addition of Co to FeNi or annealing after HPT. The formation of the phase must be associated with enhanced diffusion through HPT.     

Loss of coherency of the alpha/beta interface boundary in titanium alloys during deformation

The loss of coherency of interphase boundaries in two-phase titanium alloys during deformation was analyzed. The energy of the undeformed interphase boundary was first determined by means of the van der Merwe model for stepped interfaces. The subsequent loss of coherency was ascribed to the increase of interphase energy due to absorption of lattice dislocations and was quantified by a relation similar to the Read–Shockley equation for low-angle boundaries in single-phase alloys. It was found that interphase boundaries lose their coherency by a strain of approximately 0.5 at T = 800°C.     

Crystallization behaviour of Al-based amorphous alloy and nanocomposites by rapid quenching

The microstructure and crystallization behaviour of melt-spun Al₈₈Ni₉Ce₂Fe₁ amorphous alloy and nanophase composites have been studied by means of X-ray diffraction, transmission electron microscopy and scanning and isothermal calorimetry. The diffraction patterns from Al₈₈Ni₉Ce₂Fe₁ amorphous alloys are diffuse, indicating a basically amorphous structure but contain two rings presumed to be associated with quenched-in nuclei. In the cases of Al₈₈Ni₉Ce₂Fe₁ nanophase composites, nanoscale precipitated particles are homogeneously dispersed in an amorphous matrix, and the crystallite diameter and volume fraction are sensitive to quenching conditions. During thermal crystallization, a two-step phase transformation occurs in the amorphous alloy and nanocomposites, which is characterized by a diffusion-controlled precipitation of nanoscale Al particles and the growth of a Al₃(Ni, Fe) nanophase prior to a Al₁₁Ce₃ nanophase. This study gives insight into structure-control for obtaining nanophases dispersed in an amorphous matrix by rapid quenching.