Accelerating heterogeneous nucleation to increase hardness and electrical conductivity by deformation prior to ageing for Cu-4 at.% Ti alloy

ABSTRACT

Deformation bands, especially shear bands were intentionally formed in supersaturated Cu-4 at.% Ti alloy by groove-rolling with 75% area reduction. Cold deformation prior to the ageing process changed the precipitation behaviour of the alloy. The deformed structure with shear bands was maintained, without showing recovery and recrystallisation, even after prolonged ageing at 450°C for more than one day. The thermally stable shear bands act as nucleation initiation sites and prevent the expansion of discontinuous cellular precipitates. The hardness reached a value of 305?Hv and an electrical conductivity of 15% IACS (IACS?=?International Annealed Copper Standard. 100% IACS is defined as the conductivity corresponding to a volume resistivity at 20°C of 17.241?nΩ), compared to 283?Hv and 13% IACS for conventional solid-solutioned and peak-hardened alloy. In addition, the ageing time to reach the highest hardness was shortened from 720 to 180?min at 450°C.     

Positive relationship between passive muscle stiffness and rapid force production

We aimed to examine the relationship among the muscle shear modulus at rest, maximal joint torque, and rate of torque development (RTD). Twenty-seven participants (28 ± 5 years, 13 women) were recruited in the study. The cross-sectional area (CSA) of the medial gastrocnemius (MG) muscle belly and shear modulus at an ankle joint angle of 0° were calculated using magnetic resonance imaging and ultrasound shear wave elastography, respectively. Subsequently, participants performed maximal isometric plantar flexion at 0° ankle joint angle [maximal voluntary contraction (MVC) test] as fast and hard as possible (RTD test). RTD was calculated from the time–torque curve over time intervals of 0–30, 0–50, 0–100, 0–150, and 0–200 ms from the onset of plantar flexion during the RTD test and was normalized by MVC torque to exclude muscle strength. MG CSA correlated significantly with MVC torque (r = 0.572), whereas MG shear modulus did not. In contrast, MG shear modulus correlated significantly with normalized RTD at all time intervals (r = 0.460–0.496). These results suggest that passive muscle stiffness is not associated with muscle force; however, higher passive muscle stiffness at a given joint angle may contribute to rapid force production.     

A derived transfer of simple discrimination and self-reported arousal functions in spider fearful and non-spider-fearful participants

Two experiments investigated the derived transfer of functions through equivalence relations established using a stimulus pairing observation procedure. In Experiment 1, participants were trained on a simple discrimination (A1+/A2-) and then a stimulus pairing observation procedure was used to establish 4 stimulus pairings (A1-B1, A2-B2, B1-C1, B2-C2). Subsequently, a transfer of the simple discrimination functions through equivalence relations was observed (e.g., C1+/C2-). These procedures were modified in Experiment 2, which demonstrated that spider-fearful and non-spider-fearful participants show differing levels of a transfer of self-reported arousal functions for stimuli used in equivalence relations with video-based material depicting scenes with spiders. The results demonstrate that the stimulus pairing observation procedure provides a viable alternative to matching-to-sample, and also offer tentative support for a derived-relations model of the acquisition of anxiety responses in at least one sub-clinical population.     

Quartic rotation criteria and algorithms

Most of the currently used analytic rotation criteria for simple structure in factor analysis are summarized and identified as members of a general symmetric family of quartic criteria. A unified development of algorithms for orthogonal and direct oblique rotation using arbitrary criteria from this family is given. These algorithms represent fairly straightforward extensions of present methodology, and appear to be the best methods currently available.The research done by R. I. Jennrich was supported by NSF Grant MCS-8301587.     

Understanding the shear band interaction in metallic glass

Qualitative and quantitative models were proposed to understand the shear band (SB) interaction scenario found in the compressive tests on specimen with two symmetrical semi-circular notches. The so-called ‘work-hardening’ behavior could be ascribed as the stress interaction which was caused by stress fields around the SB tips. Besides, the SB bending was observed along propagation orientation. The quantitative analysis based on traditional shear deformation mechanism could reasonably account for how the SB was bent. It is anticipated that the present work could provide a pathway to understand the deep SB deformation mechanism of metallic glass.     

Change mechanisms in cognitive therapy of a simple phobia: Logical analysis and empirical hypothesis testing

The effectiveness of two hypothesized change mechanisms in cognitive therapy was investigated: logical analysis and empirical hypothesis testing. Thirty-eight spider phobics, as determined by performance on a behavioral avoidance test, were randomly assigned to either one of these two conditions or to a no-treatment control condition. Subjects participated in three group sessions. Outcome phobia questionnaire data suggested that both mechanisms produced desirable changes in a short period of time, with stronger evidence that logical analysis was superior to the control. Outcome from the behavior avoidance test and self-efficacy ratings failed to reach statistical significance but the trends were in the direction of positive change. Results are discussed in terms of the tripartite response dessynchrony hypothesis. Suggestions for future process research in cognitive therapy are provided.William O'Donohue, Ph.D., is an assistant professor of psychology at Northern Illinois University.Jeff Szymanski is a graduate student in clinical psychology at Northern Illinois University.The authors would like to thank Christine Casselles, Melissa McKelvie, Thomas M. Brown, Jill C. Rudman, Bonnie Schrieber, Amy Ray, Anne Valle, Lisa Herold, Jacqueline Ryan, Heather Barta, and Angela Leek for their assistance in this project. Moreover, the authors are grateful to Sol Feldman and Jane Fisher for their comments on an earlier version of this paper.     

The essential process in a family of measurement models

Five members of the Rasch family of latent trait models which have appeared more or less independently in the literature are brought together and identified as one model. In addition to sharing the distinguishing characteristic of the dichotomous Rasch model—separable person and item parameters and hence sufficient statistics—all five models share a common algebraic form and have as their basic element the fundamental process defined by Rasch's simple logistic expression. In these models, the sufficient statistics for person and item parameters are counts of events constructed to be indicative of the variable being measured, and the measures they enable are ‘fundamental’.     

简单算术对汉语特定句型的结构启动

结构启动是指个体在产生或理解一个结构时,倾向于重复使用或仿照刚刚加工过的结构。与句法启动不同的是,结构启动除了以句子,也可以以其它抽象结构作为启动项。Scheepers et al. (2011) 首次以具有结构偏向性的抽象算式作为启动项,证实了高附着和低附着的简单算式对英语母语者产出高附着和低附着关系从句具有结构启动效应。在此基础上,本研究引用数学算式作为启动项,以汉语特定句型结构NP1+有+NP2+恨+(AP)为切入点,分别选取汉语成人和儿童受试,检验简单算式对汉语母语者产出或理解特定句型的结构启动效应。本研究发现：1）算式结构对汉语特定句型的产出具有结构启动效应。2）算式结构对汉语歧义句的解读具有结构启动效应。3）儿童和成人在产出和理解的启动实验中具有不同结构启动效应,且儿童的结构启动效应比成人的结构启动效应更强。4）算式结构和语言句式在认知上具有共享的结构表征。     

Tests of Simple Slopes in Multiple Regression Models with an Interaction: Comparison of Four Approaches

In multiple regression researchers often follow up significant tests of the interaction between continuous predictors X and Z with tests of the simple slope of Y on X at different sample-estimated values of the moderator Z (e.g., ±1 SD from the mean of Z). We show analytically that when X and Z are randomly sampled from the population, the variance expression of the simple slope at sample-estimated values of Z differs from the traditional variance expression obtained when the values of X and Z are fixed. A simulation study using randomly sampled predictors compared four approaches: (a) the Aiken and West (1991 Aiken, L. S., &; West, S. G. (1991). Multiple regression: Testing and interpreting interactions. Newbury Park, CA: Sage.[Crossref] , [Google Scholar]) test of simple slopes at fixed population values of Z, (b) the Aiken and West test at sample-estimated values of Z, (c) a 95% percentile bootstrap confidence interval approach, and (d) a fully Bayesian approach with diffuse priors. The results showed that approach (b) led to inflated Type 1 error rates and 95% confidence intervals with inadequate coverage rates, whereas other approaches maintained acceptable Type 1 error rates and adequate coverage of confidence intervals. Approach (c) had asymmetric rejection rates at small sample sizes. We used an empirical data set to illustrate these approaches.