From “disciplined subjectivity” to “taming wild thoughts”: Bion's elaboration of the analysing instrument

Abstract

Freud encouraged the analyst to use his unconscious “as an instrument of the analysis,” but did not elaborate on how this should be done. This recommendation opened the door to a consideration of unconscious communication between the analyst and patient as an intersubjective exchange. Both Wilfred Bion and Erik Erikson emphasised the importance of the analyst's intuition, and the author compares and contrasts these two approaches. Erikson advocated a more cautious attitude regarding the analyst's subjectivity, while Bion promoted a broader application of the analyst's various private reactions to the analysand. A brief vignette from the analysis of a five-year-old boy is offered to illustrate the importance of the analyst's reveries, the mutual process of containment and transformation between analyst and patient, and the co-creation of an analytic narrative.     

Analysis of the relation between structure and the superconducting transition in YBa2 Cu3 O∼7

Abstract

It is shown that in the high-T_c YBa₂ Cu₃ O_～7 superconductor the critical temperature is a function of the orthorhombic distortion (b–a)/a of the unit cell. From the extrapolation of the (b - a)/a ratio against T_c , a maximum critical temperature of 66 K for the tetragonal phase of YBa₂ Cu₃ O_～7 was predicted. From the correlation between the transition width δT_c and the orthorhombic distortion there was deduced an upper limit for T_c , in the orthorhombic phase of YBa₂ Cu₃ O_～7 of 94·5K.     

Coexistence of adjacent vacancy-ordered and eutectic phases in Al–Cu–Ni alloys

ABSTRACT

Copper-mould-cast Al–Cu–Ni alloys show adjacent coexistence of in situ grown ordered and eutectic phases. A bimodal microstructure of α–Al and eutectic α-Al+θ-Al₂Cu phases with length-scale hierarchy evolves during solidification. Microstructural analysis through Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM) shows the presence of Vacancy-ordered phases (VOPs) with different morphologies in two different compositions.     

Effects of temperature and electron energy on the electron-irradiation-induced decomposition of sapphire

The effects of temperature and electron energy on the electron-irradiation-induced decomposition of sapphire have been investigated by in situ transmission electron microscopy (TEM). It was found that the decomposition rate of α-Al₂O₃ increased with increasing irradiation temperature and decreased with increasing acceleration voltage. The core-hole Auger decay process (K–F model), rather than knock-on displacement, is responsible for the decomposition of α-Al₂O₃ under electron irradiation.     

Elastic solutions with arbitrary elastic inhomogeneity and anisotropy

An efficient numerical algorithm is proposed to accurately compute the elastic fields in two-dimensional (2D) or three-dimensional (3D) microstructures with arbitrary elastic inhomogeneity and anisotropy. It combines the equivalent inclusion method of Eshelby, the microelasticity theory of Khachaturyan, and the spectral iterative perturbation method of Hu and Chen. Its efficiency is compared with those of existing approaches in the literature. The method can be conveniently implemented in phase-field modeling of stress-dependent microstructure evolution and/or of mass/electrical transport.     

In situ characterization of the martensitic transformation temperature of NiTi shape memory alloys via instrumented microindentation

A novel, instrumented microindentation technique was successfully used to measure the temperature associated with the martensitic transformation leading to the recovery of plastic strain in a Nickel–Titanium (NiTi) shape memory alloy. Following a standard indentation cycle, the indenter was partially unloaded such that a good contact was maintained between indenter and specimen surface. The onset and finish temperature of the martensitic transformation, the associated volume contraction, and the amount of the recovered plastic deformation were determined by quantifying the indenter displacement as a function of temperature. These experiments were compared to conventional measurements of the transformation temperature by differential scanning calorimetry and compression testing.     

Possibility of a shape phase transition for solidification of tin at scallop-like surfaces of Cu6Sn5

The possibility of solder-spreading transitions in solidification of solder at a rough rigid intermetallic surface is proven theoretically. Depending on the misorientation of scallops on the interface, one can observe a two-dimensional spreading transition over the scallops or a one-dimensional spreading transition along the triple-junction of two intermetallic compound scallops and liquid solder. The extent of undercooling can be determined not only by different interface energies, but by different angles between neighbouring scallops as well.     

Phase-transformation-induced hardening in Zn–22Al alloys

A phase-transformation-induced hardening effect is reported in Zn–22Al (Al: 22?wt.%) alloys. The Zn–22Al specimens were held at 300?°C for 10?h and then quenched in water. A hardening effect took place in subsequent artificial aging at 100–200?°C, which was accompanied by a phase decomposition of a soft α ₂ phase and a grain coarsening. The phase-transformation-induced hardening affects the hardness more than the grain-coarsening-induced softening, which leads to the age-hardening phenomenon.     

Effects of Si addition on the microstructure evolution of Al–Cu–Mg alloys in the α + S + T phase field

The precipitation behaviour and age-hardening response of Al–1.5Cu–4.0Mg (wt.%) alloys microalloyed with Si have been investigated by means of hardness measurement, TEM and HRTEM. Compared to the ternary alloy, the quaternary alloys exhibit a higher hardness. It is found that the underaged microstructure in the Al–1.5Cu–4.0?Mg alloy contains some fine precipitates, which are identified as the T phase by FFT spectra. The peak-aged microstructures of the ternary alloy is dominated by the T phase, while the peak-aged microstructures of the Si-containing alloys are dominated by the S phase. The volume fraction of the S phase is found to increase as more Si is added.     

Introduction

There are very significant conceptual links between theories of social macroevolution and theories of the World System development. It is shown that the growth of the World System complexity and integrity can be traced through a system of phase transitions of macroevolution. The first set of phase transition is connected with the agrarian, industrial, and information-scientific revolutions (that are interpreted as changes of “production principles”). The second set consists of phase transitions within one production principle. These phase transitions are analyzed on the basis of the World System urbanization dynamics, but they can be traced with respect to the other (cultural, economic, technological, demographic, political, etc.) dimensions of the World System development.