Transformation of the discriminative and eliciting functions of generalized relational stimuli

In three experiments, match-to-sample procedures were used with undergraduates to establish arbitrary relational functions for three abstract visual stimuli. In the presence of samples A, B, and C, participants were trained to select the smallest, middle, and largest member, respectively, of a series of three-comparison arrays. In Experiment 1, the B (choose middle) stimulus was then used to train a steady rate of keyboard pressing before the A (choose smallest) and the C (choose largest) stimuli were presented. Participants pressed slower to A and faster to C than to B. Then B was paired with mild shock in a Pavlovian procedure with skin conductance change as the dependent variable. When presented with A and C, 6 of 8 experimental participants showed smaller skin conductance changes to A and larger skin conductance changes to C than to B. In Experiment 2, A was then used as a sample in a match-to-sample procedure to establish an arbitrary size ranking among four same-sized colored circle comparisons. One of the middle circles was then used to establish a steady rate of pressing before the other circles were presented. Five of 6 participants responded slower to the "smaller" circle and faster to the "larger" circle than they did to the "middle" circle. In Experiment 3, A, B, and C were then presented on a series of test trials requiring participants to pick the comparison that was less than, greater than, or equal to the sample. Novel stimuli were included on some trials. Results indicated that the relational training procedures produced derived relations among the stimuli used in training and that these allowed correct inferences of relative size ranking among novel stimuli.     

Contingency tracking during unsignaled delayed reinforcement

Three experiments were conducted with rats in which responses on one lever (labeled the functional lever) produced reinforcers after an unsignaled delay period that reset with each response during the delay. Responses on a second, nonfunctional, lever did not initiate delays, but, in the first and third experiments, such responses during the last 10 s of a delay did postpone food delivery another 10 s. In the first experiment, the location of the two levers was reversed several times. Responding generally was higher on the functional lever, though the magnitude of the difference diminished with successive reversals. In the second experiment, once a delay was initiated by a response on the functional lever, in different conditions responses on the nonfunctional lever either had no effect or postponed food delivery by 30 s. The latter contingency typically lowered response rates on the nonfunctional lever. In the first two experiments, both the functional and nonfunctional levers were identical except for their location; in the third experiment, initially, a vertically mounted, pole-push lever defined the functional response and a horizontally mounted lever defined the nonfunctional response. Higher response rates occurred on the functional lever. These results taken together suggest that responding generally tracked the response-reinforcer contingency. The results further show how nonfunctional-operanda responses are controlled by a prior history of direct reinforcement of such responses, by the temporal delay between such responses and food delivery, and as simple generalization between the two operanda.     

Resurgence and repeated within-session progressive-interval thinning of alternative reinforcement

Resurgence of a previously suppressed target behavior is common when reinforcement for a more recently reinforced alternative behavior is thinned. To better characterize such resurgence, these experiments examined repeated within-session alternative reinforcement thinning using a progressive-interval (PI) schedule with rats. In Experiment 1, a transition from a high rate of alternative reinforcement to a within-session PI schedule generated robust resurgence, but subsequent complete removal of alternative reinforcement produced no additional resurgence. Experiment 2 replicated these findings and showed similar effects with a fixed-interval (FI) schedule arranging similarly reduced session-wide rates of alternative reinforcement. Thus, the lack of additional resurgence following repeated exposure to the PI schedule was likely due to the low overall obtained rate of alternative reinforcement provided by the PI schedule, rather than to exposure to within-session reinforcement thinning per se. In both experiments, target responding increased at some point in the session during schedule thinning and continued across the rest of the session. Rats exposed to a PI schedule showed resurgence later in the session and after more cumulative alternative reinforcers than those exposed to an FI schedule. The results suggest the potential importance of further exploring how timing and change-detection mechanisms might be involved in resurgence.     

Immediate postsession feeding reduces operant responding in rats

Three experiments investigated the effects of immediate and delayed postsession feeding on progressive-ratio and variable-interval schedule performance in rats. During Experiments 1 and 2, immediate postsession feeding decreased the breakpoint, or largest completed ratio, under progressive-ratio schedules. Experiment 3 was conducted to extend the results of the first two experiments to responding maintained by variable-interval schedules with different session lengths (15 and 60 min). Response rates decreased in all 4 subjects when postsession feeding immediately followed a 15-min session and in 3 of 4 subjects when postsession feeding immediately followed a 60-min session. The implications of this research are twofold: (1) The functional context in which within-session reinforcers are embedded extends outside the experimental chamber, and (2) supplemental postsession feedings should be sufficiently delayed from the end of a session to avoid weakening operant behavior in the experimental sessions.     

ASSESSING THE ROLE OF EFFORT REDUCTION IN THE REINFORCING EFFICACY OF TIMEOUT FROM AVOIDANCE

Rats responded on concurrent schedules of shock‐postponement or deletion (avoidance) and timeout from avoidance. In Experiment 1, 3 rats' responses on one lever postponed shocks for 20 s and responses on a second lever produced a 1‐min timeout according to a variable‐interval 45‐s schedule. Across conditions, a warning signal (white noise) was presented 19.5 s, 16 s, 12 s, 8 s, or 4 s before an impending shock. Raising the duration of the warning signal increased both avoidance and timeout response rates. Timeout responding, although positively correlated with avoidance responding, was not correlated with the prevailing shock rate. In Experiment 2, 3 rats' responses on one lever deleted scheduled shocks according to a variable‐cycle 30‐s schedule and responses on a second lever produced a 2‐min timeout as described above. After this baseline condition, the avoidance lever was removed and noncontingent shocks were delivered at intervals yoked to the receipt of shocks in the baseline sessions. Timeout responding decreased when the avoidance lever was removed, even though the shock‐frequency reduction afforded by the timeout remained constant. These results suggest that a key factor in the reinforcing efficacy of timeout is suspension of the requirement to work to avoid shock, rather than the reduction in shock frequency associated with timeout.     

Dynamic properties of an ultrafine-grained Mg–Zn–Zr alloy

The effect of ultrafine-grained structure formation in Mg–Zn–Zr alloy ZK60 on its mechanical response was investigated at strain rates ranging from quasi-static to dynamic regimes. The study demonstrated that the strength characteristics of the material rise significantly with increasing strain rate, while its ductility is reduced. These effects are particularly pronounced in the dynamic loading regime, at strain rates in the (1?5)?×?10²?s^?1 range. In the ultrafine-grained alloy ZK60, the energy absorption per unit volume, W, is enhanced by grain refinement by a factor as high as eight for the highest strain rate of 5?×?10²?s^?1 investigated. The analysis is focused on the microstructure features that bring about the observed improvement of the tensile characteristics, as well as the deformation and fracture modes prevalent at different strain rates. The results obtained contribute to the exploration and understanding of dynamic behaviour of magnesium alloys.     

Behavioral effects of delayed timeouts from reinforcement

Timeouts are sometimes used in applied settings to reduce target responses, and in some circumstances delays are unavoidably imposed between the onset of a timeout and the offset of the response that produces it. The present study examined the effects of signaled and unsignaled timeouts in rats exposed to concurrent fixed‐ratio 1 fixed‐ratio 1 schedules of food delivery, where each response on one lever, the location of which changed across conditions, produced both food and a delayed 10‐s timeout. Delays of 0 to 38 s were examined. Delayed timeouts often, but not always, substantially reduced the number of responses emitted on the lever that produced timeouts relative to the number emitted on the lever that did not produce timeouts. In general, greater sensitivity was observed to delayed timeouts when they were signaled. These results demonstrate that delayed timeouts, like other delayed consequences, can affect behavior, albeit less strongly than immediate consequences.     

The effects of 100 dB 1‐kHz and 22‐kHz tones as punishers on lever pressing in rats

Aversive control is an important yet understudied process of learning. One reason aversive control may be relatively understudied is ethical concerns about painful stimuli (e.g., electric shock). High decibel broad‐band noise and 22‐kHz vocalizations both demonstrably affect rodent behavior while not necessarily being painful. The goal of this study was to determine if 100‐dB 22‐kHz‐pure tones were differentially more effective in reducing operant response rates in rats. We examined whether 22‐kHz pure tones would function as aversive stimuli, specifically as positive punishers. The effects of response‐dependent as well as continuously presented 22‐kHz and 1‐kHz tones on rate of response maintained by variable interval 30‐s food deliveries were assessed across several conditions. We found that response rates were lower when tones were presented response dependently than when tones were presented continuously throughout a session. We also found that the lower response rates obtained with response‐dependent 22‐kHz tones were not significantly different from response rates obtained with response‐dependent 1‐kHz tones. The primary conclusion of this experiment is that both 1‐kHz and 22‐kHz tones functioned as punishers, but that the 22‐kHz tones were not differentially more effective in reducing response rate.     

The authorship of Uri Zohar: the ethics and aesthetics of the Archimedean lever

This article discusses Zohar’s subversive reflexive aesthetics, termed the “Archimedean-lever ethics,” comprised of three stages: the world rendered from one perspective; the same world rendered from a different perspective, challenging or destroying the first; and awareness of the shift of perspectives. It argues that Zohar’s creative energy, imbued with male sexuality, derives from this collision, and examines its ethical aspect in relation to Zionist values during the 1950s and 1960s. Zionism and Israel should always consider more than one perspective, being able not only to build but also to destroy (convictions, territories) in order to bring change, with destruction thus becoming a particular form of creation. However, in Zohar’s films made during the 1970s, the male sexual energy becomes an endless sexual appetite, expressed mostly through coveting gazes, which is no more than a cover up for male impotency, tantamount to Israel’s endless appetite for land.