Neutron and X-ray diffraction studies and cohesive interface model of the fatigue crack deformation behavior

The crack-tip deformation behavior during a single overload, fatigue test of ferritic stainless steel, and Ni-based HAYNES 230 superalloy is studied at different structural levels using (1) neutron-diffraction, from which both the elastic-lattice strain and volume-averaged total dislocation densities are obtained, (2) polychromatic X-ray microdiffraction to probe the geometrically necessary dislocations and boundaries distribution, and (3) an irreversible and hysteretic cohesive interface model which has been implemented into a finite element framework to simulate the stress/strain evolution near the fatigue crack tip. Neutron strain measurements and finite element simulations are in qualitative agreement on the macroscopic length scale. Large plastic deformation induced by the overload and the resulting compressive residual strains are observed in front of the crack tip after the overload, and are the principal reason for the fatigue-crack-growth retardation. Strong strain gradients surrounding the crack propagation result in the formation of a high density of geometrically necessary dislocations near the fractured surface and cause local lattice rotations on the submicron level.     

high-resolution electron microscopy at a (113) symmetric Thermally activated step motion observed by tilt grain-boundary in aluminium

Grain-boundary migration is demonstrated to proceed by lateral propagation of a small step in a (113), [110] symmetric Al tilt grain-boundary. In-situ high-resolution (transmission) electron microscopy (HREM) at 523K allowed the study of atomic-scale detail at video rates during the migration process. The grain-boundary translational states on both sides of the step are identical, which leads to a step dislocation. This defect can move laterally by a combination of climb and glide. Dynamic HREM images indicate considerable atomic agitation within the dislocation core. A detailed temporal analysis of the step movements shows small random displacements of the dislocation core.     

Formation of ω -Al7Cu2Fe phase during laser processing of quasicrystal-forming Al–Cu–Fe alloy

The formation of an ω-Al₇Cu₂Fe phase during laser cladding of quasicrystal-forming Al₆₅Cu_23.3Fe_11.7 alloy on a pure aluminium substrate is reported. This phase is found to nucleate at the periphery of primary icosahedral-phase particles. A large number of ω-phase particles form an envelope around the icosahedral phase. On the outer side, they form an interface with an α-Al solid solution. Detailed transmission electron microscopic observations show that the ω phase exhibits an orientation relationship with the icosahedral phase. Analysis of experimental results suggests that the ω phase forms by precipitation on an icosahedral phase by heterogeneous nucleation and grows into the aluminium-rich melt until supersaturation is exhausted. The microstructural observations are explained in terms of available models of phase transformations.     

Log-normal nanograin-size distributions in nanostructured composites

A key challenge in the fabrication of superhard nanocomposite films is how to control the distribution of grain sizes in these materials. High-resolution transmission electron microscopy has been used to measure nanograin-size distributions in the Ti–B–N films with various B contents. The results show that the mean grain size decreases with increase of B content and the grain-size distribution conforms to a log-normal function when the hardness approaches a maximum value. The transition from normal to log-normal distributions can be determined by analysis in terms of a minimum information criterion. The origin of a log-normal size distribution probably results from heterogeneity arising from a diffusion-drift process.     

Design strategy for microalloyed ultra-ductile magnesium alloys

This article describes a design strategy deployed in developing ultra-ductile Mg alloys based on a microalloying concept, which aims to restrict grain growth considerably during alloy casting and forming. We discuss the efficiency of the design approach, and evaluate the resulting microstructural and mechanical properties. After processing, the so-designed alloys ZQCa3 (Mg–3Zn–0.5Ag–0.25Ca–0.15Mn, in wt.%) and ZKQCa3 (Mg–3Zn–0.5Zr–0.5Ag–0.25Ca–0.15Mn, in wt.%) reveal very fine grains (<10 µm), high ductility (elongation to fracture of up to 30%) at moderate strength or high strength (ultimate tensile strength of up to 350 MPa) at reasonable ductility. These properties are explained based on thermodynamic modelling, microstructure analysis including transmission electron microscopy studies, and microstructural and mechanical testing after annealing, and are compared to a related commercial alloy (ZK31).     

Enhancement on the faceted growth and the coarsening of the MnBi primary phase during the directional solidification under a high magnetic field

The effect of a high magnetic field on the morphology of the MnBi primary phase during the directional solidification has been investigated experimentally and the results show that an application of a high magnetic field has enhanced the faceted growth and the coarsening of the MnBi primary phase. This may be attributed to the effect of a high magnetic field on the diffusion of the solute Mn and the growth anisotropy of the MnBi crystal.     

The nature of quality of life in residential care facilities: the case of White older South Africans

This study describes the nature of quality of life (QoL) from the perspective of older South Africans (n?=?41) in residential care facilities (female =?75%; age range 62–95 years). The residents participated in individual in-depth interviews and focus groups. They also set down their narrative reflections on their QoL in journals. Data were analysed by means of interpretative phenomenological analysis. Findings reveal the resident older South Africans regard QoL as a spiritually informed worldview of life events, coping with challenges and being mindful of others. The residents perceived QoL to include proximity and quality and reciprocity with others. QoL among older people is context and people specific.     

A relationship with Señor de Carácuaro

The present paper explores the issue of personal relationships in the context of pilgrimage. Most literature about pilgrimage in Latin America focuses on the journey, or on the alleged ‘sacred power’ located in the shrine and sought by the pilgrims. I argue that, from the perspective of the participants’ experience, pilgrimage could be understood in terms of personal relationships with particular holy beings, who are perceived as agents. Through the particular case of Marta, a young Purhépecha woman from Lake Pátzcuaro (Mexico), I will examine the modes in which people from this area relate, interact and communicate with saintly beings in the context of pilgrimage; the connection of vows with quotidian experience; and the implications of relationships with saints for people in their everyday lives.     

Metanoia

SUMMARY

The author draws on her experience working with individual men who are violent to their partners to think about the problem of international violence. A parallel is drawn between a man's feeling of “entitlement” to forcefully keep his partner “in line” and feelings of national entitlement to engage in violence to force one group's agenda on another. The differences between morals and taboos are discussed underscoring the community value of that which becomes socially and ethically “unthinkable.”