Time-dependent adhesion of a polydimethylsiloxane (PDMS) elastomer film to a flat indenter tip characterized using a cohesive-zone law

The work of adhesion between a polydimethylsiloxane (PDMS) elastomer film and a flat diamond tip was measured by instrumented indentation. The results showed that the apparent work of adhesion between the tip and the PDMS film increases with increasing dwell time and retreating velocity; on the other hand, the indentation depth has no significant effect on adhesion. The indentation experiment was analysed with viscoelastic finite element simulations with rate-dependent cohesive elements, from which the time evolution of adhesion was quantitatively implemented into a rate-dependent cohesive-zone law.     

A new orthorhombic approximant of the icosahedral Al–Cu–Fe quasicrystal

We report on the formation of a new crystalline approximant phase of the icosahedral (i-)Al–Cu–Fe quasicrystal. This phase is formed during sintering of Al-based composites reinforced with i-AlCuFeB quasicrystalline particles. The structure of this phase has been characterized by transmission electron microscopy (TEM) and high-resolution electron microscopy (HREM). TEM revealed that it is a B-centred orthorhombic phase with lattice parameters a = 1.166 nm, b = 1.195 nm and c = 3.44 nm. Its chemical composition, as determined by electron energy loss spectroscopy (EELS), is close to Al_76.9Cu_2.7Fe_20.4, with an average number of valence electrons per atom e/a of 1.92, similar to the value in all other approximants of the i-phase discovered thus far. Initial results on local atomic arrangements along one of its pseudo-5-fold axes are also presented.     

Negative,zero and positive stiffness in extended Eshelby plates

Structures under loading can show positive and negative stiffness (during buckling) with zero stiffness just being one point of transition. Material structures with extended zero stiffness regimes have also been reported. Using the example of an extended Eshelby plate with a positive and negative edge dislocation, we show the existence of finite regimes of positive, zero and negative stiffness in a single system. Given that stable states/configurations of negative stiffness cannot exist in an isolated system; we show the existence of metastable states of negative stiffness along with unstable states of positive stiffness. The system also exhibits one point of unstable equilibrium.     

Listeners learn phonotactic patterns conditioned on suprasegmental cues

Language learners are sensitive to phonotactic patterns from an early age, and can acquire both simple and 2nd-order positional restrictions contingent on segment identity (e.g., /f/ is an onset with /æ/but a coda with /?/). The present study explored the learning of phonototactic patterns conditioned on a suprasegmental cue: lexical stress. Adults first heard non-words in which trochaic and iambic items had different consonant restrictions. In Experiment 1, participants trained with phonotactic patterns involving natural classes of consonants later falsely recognized novel items that were consistent with the training patterns (legal items), demonstrating that they had learned the stress-conditioned phonotactic patterns. However, this was only true for iambic items. In Experiment 2, participants completed a forced-choice test between novel legal and novel illegal items and were again successful only for the iambic items. Experiment 3 demonstrated learning for trochaic items when they were presented alone. Finally, in Experiment 4, in which the training phase was lengthened, participants successfully learned both sets of phonotactic patterns. These experiments provide evidence that learners consider more global phonological properties in the computation of phonotactic patterns, and that learners can acquire multiple sets of patterns simultaneously, even contradictory ones.     

组块紧密性导致组块破解困难：部件类型还是交错关系？

本研究的目的是澄清“组块紧密性为何导致组块破解困难”。研究基于汉字减法任务,也即让被试从一个源汉字中移动一个目标部件从而得到一个新汉字,在三个实验中检验了部件类型和交错关系的作用。结果显示,交错条件比非交错条件解答率更低反应时更长;而部件类型效应则主要体现在非交错条件的反应时指标上。结果提示,组块紧密性导致了组块破解困难,这主要取决于空间交错关系;相对的,部件类型作用较小。     

Autoshaping with common and distinctive stimulus elements, compact and dispersed arrays

Four groups of pigeons were trained with a standard autoshaping procedure in which a brief fixed-duration interval always followed by a grain delivery alternated with a longer variable-duration interval never associated with grain delivery. One of two stimuli was always presented during each interval. One of them contained three black dots and a black star on a green background; the other contained four black dots on a green background. The four elements of each stimulus were arranged in a more compact array for two groups and in a more dispersed array for the other two groups. Which of the two stimuli preceded grain delivery was counterbalanced within each pair of groups. The speed of occurrence of the first autoshaped peck was not affected by whether the stimulus containing the distinctive star element preceded grain delivery, but autoshaping was faster when the stimulus arrays were compact than when they were dispersed. During 560 response-independent training trials that followed the first autoshaped peck, this pattern reversed; both discriminative control over responding and the relative frequency of pecking the stimulus that preceded grain delivery were greater for the two groups where this stimulus contained the discriminative element than for the two groups where it contained only common elements. During subsequent testing with stimuli containing only a single element each, the distinctive feature was responded to proportionately more often by the two groups for which it had been an element of the stimulus preceding grain delivery than by the two groups for which it had been an element of the stimulus complex that never was associated with grain delivery. These data add further support to the hypothesis that the initial occurrence of autoshaped responding and its subsequent maintenance are not affected by the same variables. They also suggest that automaintenance is as sensitive as response-dependent training to the presence or absence of a distinctive stimulus element among several common elements and that this sensitivity appears to be independent of the specific method used for presenting the stimuli during automaintenance.     

Orthographic congruency effects in the suprasegmental domain: Evidence from Thai

The influence of orthographic knowledge on lexical tone processing was examined by manipulating the congruency between the tone and the tone marker of Thai monosyllabic words presented in three metalinguistic tasks. In tone monitoring (Experiment 1) and same–different tone judgement (Experiment 2)—that is, tasks that require an explicit analysis of tone information—an orthographic congruency effect was observed: Better performance was found when both tone and tone marker led to the same response than when they led to opposite, competing responses. In rhyme judgement (Experiment 3), a metaphonological task that allows tone to be processed in a more natural way since it does not require explicit analysis of tone, the orthographic effect emerged only when the interstimulus interval was lengthened from 30 to 1,200 ms. In addition to demonstrating the generalization of the orthographic congruency effect to the suprasegmental domain in Thai, the present data also suggest relatively late and task-dependent activation of orthographic representations of tone.     

Newly observed microscopic planar defects on {111} in natural diamond

Abstract

Circular disc-crack-like defects randomly distributed on {111} planes have been discovered by 300kV transmission electron microscopy in diamond that had crystallized on non-faceted growth surfaces of mean orientation {100}. In a sample of ～ 100 defects, disc diameters were narrowly distributed about a mean of 1·2 μm and one in seven discs were located on a coplanar stacking fault of average diameter 2 μm. Discs totally enclosed within the specimen exhibit concentric moiré fringes covering their image areas when viewed obliquely, showing them to be dilated into thin lenticles. Internal pressures, deduced from moiré-fringe counts on six lenticles, were in the range 1·5 to 1·8 GPa.     

Ductility enhancement in nanoglass: role of interaction stress between flow defects

Using a thermodynamically consistent non-local plasticity model, the mechanistic origin of enhancement in ductility and suppression of dominant shear banding in nanoglasses (NGs) is analysed. It is revealed that the interaction stress between flow defects plays a central role in promoting global plasticity of NGs. Specifically, we find that the intrinsic length associated with this stress provides a scaling for the shear band width and its coupling with grain size governs the level of enhancement in the deformation behaviour of NGs. The present work may provide useful insights in developing highly ductile NGs for practical engineering applications.     

A selection of maximal elements under non-transitive indifferences

In this work we are concerned with maximality issues under intransitivity of the indifference. Our approach relies on the analysis of “undominated maximals” (cf., Peris &; Subiza, 2002). Provided that an agent’s binary relation is acyclic, this is a selection of its maximal elements that can always be done when the set of alternatives is finite. In the case of semiorders, proceeding in this way is the same as using Luce’s selected maximals.We present a sufficient condition for the existence of undominated maximals for interval orders without any cardinality restriction. Its application to certain types of continuous semiorders is very intuitive and accommodates the well-known “sugar example” by Luce.