Design considerations for achieving simultaneously high-strength and highly ductile magnesium alloys

A comprehensive scheme of phase configuration optimization in the Mg–Zn–Ca(–Zr) system by thermodynamic simulations and microstructural analyses is presented. A composition window of 0.2–0.4?wt% Ca and 5–6?wt% Zn is defined as optimal for establishing a complex heterogeneous microstructure allowing for enhanced ductility and simultaneously high strength of the material. Literature data analysis and our own results confirm the enhanced performance of alloys from this composition window.     

Mechanism of formation of aligned two-phase microstructure in a Fe-0.25wt%C alloy under high magnetic field gradients

The effect of a magnetic force on creating an aligned two-phase microstructure in a Fe-0.25wt%C alloy under magnetic field gradients has been investigated. Through the changes in the heating temperature, both dipolar interactions and magnetic forces work together during the austenite to ferrite transformation. The results showed that the aligned two-phase microstructure is not observed under the influence of the magnetic force alone. The ferrite grains are elongated due to dipole interactions at the early stages of their nucleation and growth and then the magnetic force turns the elongated ferrite grains, whose major axis is not parallel to the direction of magnetic force, to the direction of the field in the presence of magnetic field gradients.     

Misorientation characteristics of penetrating morphologies at the growth front of abnormally growing grains in aluminum alloy

The initial stage of abnormal grain growth of the aluminum alloy 5052 has been investigated using electron back-scattered diffraction to analyze the characteristic of misorientations of the penetrating morphology at the growth front. Among the 84 penetrating morphologies examined, none of the penetrated grain boundaries has low angles or coincidence site lattice (CSL) relations, whereas 66 penetrating grain boundaries have low angles or CSL relations. These results strongly suggest that the penetrating morphologies should result from triple-junction wetting.     

Reactive solid-state dewetting

High-temperature annealing in air of thick crystalline silver films deposited on high-purity nickel foils promotes solid-state dewetting, whereas no hole through the film is produced when annealing under high purity argon. Scanning electron microscopy observations of the film surface and of cross-sections reveal that dewetting occurs only if a nickel oxide layer forms at the silver-nickel interface, as a result of oxygen diffusion through the silver film. The main dewetting mechanism over short times (1h 1120K in air) is observed to be the condensation, at the silver-nickel oxide interface, of vacancies into voids which grow towards the free surface of the silver film.     

A novel lattice correspondence of B19 → B19′ transformation in Ti–Ni–Cu shape memory alloy thin film

In this study, we found a novel lattice correspondence of the B19–B19′ transformation in a Ti–Ni–Cu thin film: (1?1?1)_B19′//(0?0?1)_B19, [0, 1, 1]_B19′//[1?0?0]_B19. Near the coarse precipitate and the grain boundaries, the B19′ martensite forms with the novel lattice correspondence to product the (1?1?1) type I twinning instead of the usual (0?0?1) compound twinning. Crystallographic analyses show that the novel lattice correspondence results from the local stress concentration.     

Study of incommensurate modulation in V-doped La2Cu1- x (VO) x O4 + δ by transmission electron microscopy

Structural variations in a hole-rich grain of V-doped La₂Cu_{1? x} (VO) _x O_{4+ δ} (x?=?0.045, δ?=?0.011) superconducting compound have been studied by electron diffraction and high-resolution transmission electron microscopy. Two types of one-dimensional (1-D) incommensurate modulation were observed one after the other when the specimen was exposed to electron beam irradiation. The features of these two modulated structures have been studied and are discussed.     

Accelerating heterogeneous nucleation to increase hardness and electrical conductivity by deformation prior to ageing for Cu-4 at.% Ti alloy

ABSTRACT

Deformation bands, especially shear bands were intentionally formed in supersaturated Cu-4 at.% Ti alloy by groove-rolling with 75% area reduction. Cold deformation prior to the ageing process changed the precipitation behaviour of the alloy. The deformed structure with shear bands was maintained, without showing recovery and recrystallisation, even after prolonged ageing at 450°C for more than one day. The thermally stable shear bands act as nucleation initiation sites and prevent the expansion of discontinuous cellular precipitates. The hardness reached a value of 305?Hv and an electrical conductivity of 15% IACS (IACS?=?International Annealed Copper Standard. 100% IACS is defined as the conductivity corresponding to a volume resistivity at 20°C of 17.241?nΩ), compared to 283?Hv and 13% IACS for conventional solid-solutioned and peak-hardened alloy. In addition, the ageing time to reach the highest hardness was shortened from 720 to 180?min at 450°C.     

Surface tension measurement of undercooled liquid Ni-based multicomponent alloys

The surface tensions of liquid ternary Ni–5%Cu–5%Fe, quaternary Ni–5%Cu–5%Fe–5%Sn and quinary Ni–5%Cu–5%Fe–5%Sn–5%Ge alloys were determined as a function of temperature by the electromagnetic levitation oscillating drop method. The maximum undercoolings obtained in the experiments are 272 (0.15T _L), 349 (0.21T _L) and 363?K (0.22T _L), respectively. For all the three alloys, the surface tension decreases linearly with the rise of temperature. The surface tension values are 1.799, 1.546 and 1.357?N/m at their liquidus temperatures of 1719, 1644 and 1641?K. Their temperature coefficients are ?4.972?×?10^–4, ?5.057?×?10^?4 and ?5.385?×?10^?4?N/m/K. It is revealed that Sn and Ge are much more efficient than Cu and Fe in reducing the surface tension of Ni-based alloys. The addition of Sn can significantly enlarge the maximum undercooling at the same experimental condition. The viscosity of the three undercooled liquid alloys was also derived from the surface tension data.