Electropulsing-induced strengthening of steel at high temperature

Electropulsing usually promotes a metastable phase to evolve towards its equilibrium state. This work reports an alternative case, where electropulsing promotes the decomposition of the stable δ-phase in duplex stainless steel at high temperature. This decomposition enables both the γ-phase and the σ-phase in the steel to survive and hence to strengthen it at high temperature. The hardness of the quenched sample with electropulsing treatment is 49.4% higher than that without electropulsing treatment. A fundamental understanding of the observation is developed.     

A continuum model of deformation-twin dominant crack growth in fcc metals

A continuum model is proposed to address the effects of deformation twinning on ductile versus brittle fracture behaviour of low strain-hardening fcc metals after exhaustion of work hardening. Instead of discrete twin nucleation, a number of partial dislocations ahead of the tip exhibit themselves as twins at the final stage of failure. The crack-tip plasticity is amended for deformation twinning and the constitutive form for the flow strength of arrays of twins of the same sign is expressed as a second gradient of microrotation for their coupling. The twins not only shield the crack tip but also inhibit further dislocation emission to form a dislocation-free zone (DFZ) in the immediate vicinity of the tip. The stress fields induced by deformation twinning lead to fracture branching under Mode I loading. The model is borrowed from the conceptual model presented by Beltz et al. [Acta Mater. 44 3943 (1996)], based on the equivalence of the stresses derived from twin-based crack-tip plasticity, macroscopic plasticity and elasticity on the DFZ boundary. The DFZ size and the crack-tip shielding ratio are obtained, as well as the branching angle. The branching angle is noteworthy for low strain-hardening metals. A strong dependence of the toughness on intrinsic surface energy and hardening index is examined. The toughness reduction due to crack-tip constraints and in the ductile-to-brittle transition (DBT) temperature region is revisited and found to be in agreement with experimental observations and available predictions.     

Thermodynamic fluctuations in magnetic states: Fe3Pt as a prototype

To understand the Invar anomalies, such as negative thermal expansion and spontaneous magnetization, we have applied our recently developed thermodynamic framework for a system with itinerant-electron magnetism to the ordered Fe₃Pt. The framework has coherently predicted the finite temperature intermixing between the fully ferromagnetic (FM) configuration and the spin-flipping configurations (SFCs). We have also discovered a tri-critical point at which a high-temperature second-order phase transition, between the fully ordered FM phase and the paramagnetic phase which is disordered due to SFCs, becomes first order at low temperatures.     

Growth orientation of one-dimensional silicon nanowires prepared by thermal evaporation

One-dimensional silicon nanowires have been grown by thermal evaporation and their growth orientations determined by transmission electron microscopy studies. The nanowires, which are often highly curved in morphology and heavily twinned in microstructure, are crystallographically separated into several sections, each with a characteristic crystallographic orientation along the wire axis. Straight nanowires, or straight sections in a curved nanowire, are found to have non-unique crystallographic orientations when {111} twinning occurs.     

The orientation and temperature dependences of dislocation velocity in Ni 3 Al single crystals

The average velocities of screw dislocations in Ni 3 Al single crystals have been directly measured as a function of resolved shear stress (RSS) and orientation in the temperature domain of the flow stress anomaly using the etch-pit technique. The velocity was found to be extremely sensitive to the RSS in all cases. In contrast with ordinary metals, the screw dislocation velocities in Ni 3 Al show anomalous behaviour; under a constant RSS, the velocities decrease dramatically with increasing temperature. Furthermore, the velocities and the tension-compression asymmetry of the velocities depend on the orientation of applied stress.     

Aggregation behavior of Au atoms and atomic islands on liquid surfaces

The aggregation behavior of Au atoms and atomic islands on silicone oil surfaces has been systematically investigated by analyzing the evolution of surface coverage. The apparent Au surface coverage increases linearly with the nominal film thickness at low thicknesses and the rate of increase is almost independent of deposition flux. However, as the deposition flux increases, the surface coverage goes up linearly. Further analysis reveals that the deposition flux strongly affects the system free-energy of the island-oil system and therefore the aggregation behavior of the Au atoms and islands.     

Interactions of persistent slip bands with a grain boundary on the common primary slip plane in a copper bicrystal

In this letter, the dislocation patterns on the common primary slip plane in a fatigued \[1-34]-\[182-7] copper bicrystal with a Sigma=19b grain boundary (GB) have been investigated using the electron channelling contrast technique in a scanning electron microscope. The results show that the two-phase dislocation structure, such as veins and persistent slip band (PSB) walls, embedded within veins, can be clearly seen on the common primary slip plane. In particular, the interactions of PSBs with the GB are clearly revealed. It is found that there are three kinds of interaction mode between the GB and the dislocations during cyclic deformation, and those are discussed. It is suggested that the dislocations carried by PSBs cannot transfer through the GB continuously even though the bicrystal has a common primary slip plane and its surface slip bands are continuous across the GB.     

Childhood Maltreatment and PTSD: Spiritual Well-Being and Intimate Partner Violence as Mediators

Childhood maltreatment places individuals, including African American women who are undereducated and economically disadvantaged, at risk for developing posttraumatic stress disorder (PTSD) symptoms. Participants were 192 African American women with a history in the prior year of both a suicide attempt and intimate partner violence (IPV) exposure. They were recruited from a public hospital that provides medical and mental health treatment to mostly low-income patients. A simple mediator model was used to examine if (a) existential well-being (sense of purpose) or religious well-being (relationship with God) mediated the link between childhood maltreatment and adult PTSD symptoms. Sequential multiple mediator models determined if physical and nonphysical IPV enhanced our understanding of the mediational association among the aforementioned variables. Findings suggest that existential well-being mediated the association between childhood maltreatment and adult PTSD symptoms in a simple mediator model, and existential well-being and recent nonphysical IPV served as sequential multiple mediators of this link. However, religious well-being and physical IPV were not significant mediators. Findings underscore the importance of enhancing existential well-being in the treatment of suicidal African American women with a history of childhood maltreatment and IPV.     

颜色概念的知觉符号表征与命题符号表征

使用启动范式通过两个实验检验颜色概念的表征是知觉符号表征还是命题符号表征.实验l使用显性颜色概念,即颜色词;实验2使用隐性颜色概念,即隐含颜色信息的词.实验结果表明显性颜色概念的表征是知觉符号表征,而隐性颜色概念的表征是命题符号表征.     

教育编辑胜任力模型的构建与验证

根据教育出版社编辑工作特征,运用调查研究法、特尔菲(Delphi)专家评价法等,编制了编辑胜任力调查量表,通过对分布在全国的7个教育出版社301名编辑问卷测试,并对测试数据采用因素分析与验证分析的方法进行了系统分析,建构了教育编辑胜任力模型。研究结果表明,教育编辑胜任力主要由工作取向、自我取向、人际取向3方面8个因子构成。本研究为教育出版社的优秀编辑的培养、选拔及测评方面提供了新的理论依据。