Thermodynamic fluctuations in magnetic states: Fe3Pt as a prototype

To understand the Invar anomalies, such as negative thermal expansion and spontaneous magnetization, we have applied our recently developed thermodynamic framework for a system with itinerant-electron magnetism to the ordered Fe₃Pt. The framework has coherently predicted the finite temperature intermixing between the fully ferromagnetic (FM) configuration and the spin-flipping configurations (SFCs). We have also discovered a tri-critical point at which a high-temperature second-order phase transition, between the fully ordered FM phase and the paramagnetic phase which is disordered due to SFCs, becomes first order at low temperatures.     

Determination of the depth distribution of subsurface damage during polishing of alumina

High-resolution grazing-incidence parallel-beam powder diffraction has been used to detect the subsurface damage below alumina surfaces subjected to polishing with cerium oxide or diamond. Despite very significant evolution of the surface morphology, no changes in the subsurface strains were observed over a 20min period of polishing with ceria. For both polishing materials, the variation with angle in the full-width at half-height maximum was successfully modelled by a strain distribution that fell exponentially with increasing depth. Although the surface amplitude and depth dependence parameter are coupled, we have been able to place upper limits on the depth to which the damage extends. Under realistic assumptions, the depth of damage induced by 1µm diamond paste is comparable with that from 3µm ceria polish.     

Growth orientation of one-dimensional silicon nanowires prepared by thermal evaporation

One-dimensional silicon nanowires have been grown by thermal evaporation and their growth orientations determined by transmission electron microscopy studies. The nanowires, which are often highly curved in morphology and heavily twinned in microstructure, are crystallographically separated into several sections, each with a characteristic crystallographic orientation along the wire axis. Straight nanowires, or straight sections in a curved nanowire, are found to have non-unique crystallographic orientations when {111} twinning occurs.     

Survey of plateau behaviour in the cyclic stress-strain curve of copper single crystals

Experimental results relating to the plateau behaviour in the cyclic stress-strain (CSS) curve of copper single crystals located on different sides of the stereographic triangle are summarized. Unlike the situation for single-sliporiented crystals, the crystallographic orientation has a strong effect on the plateau behaviour in the CSS curves of double- and multiple-slip-oriented crystals. The existence or non-existence of a plateau in the CSS curves, as well as the corresponding plateau stress amplitude, depend not only on the modes and intensities of dislocation interactions among slip systems operating in the crystals but also on the slip deformation characteristics associated with crystal orientations. The plateau region in CSS curve disappears only when multiple slip plays a determining role during cyclic deformation.     

Mechanical-milling-induced amorphization of Se: A crystallite destabilization model

Complete solid-state amorphization has been realized in elemental Se by means of mechanical milling of crystalline Se powder. Quantitative X-ray diffraction and thermal analyses were employed to characterize the amorphization process and indicated that the amorphization onset corresponds to a critical crystallite size and a drop in microstrain. During the major amorphization process, the remaining crystallite size remains unchanged with a constant lattice expansion. A new kinetics model of crystallite destabilization is proposed for the solid-state amorphization which satisfactorily explains the experimental observations.     

The orientation and temperature dependences of dislocation velocity in Ni 3 Al single crystals

The average velocities of screw dislocations in Ni 3 Al single crystals have been directly measured as a function of resolved shear stress (RSS) and orientation in the temperature domain of the flow stress anomaly using the etch-pit technique. The velocity was found to be extremely sensitive to the RSS in all cases. In contrast with ordinary metals, the screw dislocation velocities in Ni 3 Al show anomalous behaviour; under a constant RSS, the velocities decrease dramatically with increasing temperature. Furthermore, the velocities and the tension-compression asymmetry of the velocities depend on the orientation of applied stress.     

Interactions of persistent slip bands with a grain boundary on the common primary slip plane in a copper bicrystal

In this letter, the dislocation patterns on the common primary slip plane in a fatigued \[1-34]-\[182-7] copper bicrystal with a Sigma=19b grain boundary (GB) have been investigated using the electron channelling contrast technique in a scanning electron microscope. The results show that the two-phase dislocation structure, such as veins and persistent slip band (PSB) walls, embedded within veins, can be clearly seen on the common primary slip plane. In particular, the interactions of PSBs with the GB are clearly revealed. It is found that there are three kinds of interaction mode between the GB and the dislocations during cyclic deformation, and those are discussed. It is suggested that the dislocations carried by PSBs cannot transfer through the GB continuously even though the bicrystal has a common primary slip plane and its surface slip bands are continuous across the GB.     

Crystallization behaviour of Al-based amorphous alloy and nanocomposites by rapid quenching

The microstructure and crystallization behaviour of melt-spun Al₈₈Ni₉Ce₂Fe₁ amorphous alloy and nanophase composites have been studied by means of X-ray diffraction, transmission electron microscopy and scanning and isothermal calorimetry. The diffraction patterns from Al₈₈Ni₉Ce₂Fe₁ amorphous alloys are diffuse, indicating a basically amorphous structure but contain two rings presumed to be associated with quenched-in nuclei. In the cases of Al₈₈Ni₉Ce₂Fe₁ nanophase composites, nanoscale precipitated particles are homogeneously dispersed in an amorphous matrix, and the crystallite diameter and volume fraction are sensitive to quenching conditions. During thermal crystallization, a two-step phase transformation occurs in the amorphous alloy and nanocomposites, which is characterized by a diffusion-controlled precipitation of nanoscale Al particles and the growth of a Al₃(Ni, Fe) nanophase prior to a Al₁₁Ce₃ nanophase. This study gives insight into structure-control for obtaining nanophases dispersed in an amorphous matrix by rapid quenching.     

Linear-parabolic shift of initially sharp interface in AB diffusion couple above the ordering temperature

It is shown that initially sharp interface in AB diffusion couple, above the ordering temperature, can shift with anomalous kinetics, i.e. deviations from the parabolic growth kinetics are possible. The initial slopes of the shift versus time functions can be even unity for large diffusion asymmetry (the ratio of diffusion coefficients of the parent materials in orders of magnitude) and gradually decrease to 0.5 at larger distances (longer times). This is in accordance with earlier results obtained in phase separating systems. It is shown that from the results of simulations the crossover thickness, X*, between the linear and parabolic regimes can also be calculated, and the applicability of the linear–parabolic law is confirmed. Furthermore, it is illustrated that the crossover thickness depends exponentially on the diffusion asymmetry parameter, with the exponent close to the value obtained from analytical estimations.     

Experimental evidence for action imitation in killer whales (Orcinus orca)

Comparative experimental studies of imitative learning have focused mainly on primates and birds. However, cetaceans are promising candidates to display imitative learning as they have evolved in socioecological settings that have selected for large brains, complex sociality, and coordinated predatory tactics. Here we tested imitative learning in killer whales, Orcinus orca. We used a ‘do-as-other-does’ paradigm in which 3 subjects witnessed a conspecific demonstrator’s performance that included 15 familiar and 4 novel behaviours. The three subjects (1) learned the copy command signal ‘Do that’ very quickly, that is, 20 trials on average; (2) copied 100 % of the demonstrator’s familiar and novel actions; (3) achieved full matches in the first attempt for 8–13 familiar behaviours (out of 15) and for the 2 novel behaviours (out of 2) in one subject; and (4) took no longer than 8 trials to accurately copy any familiar behaviour, and no longer than 16 trials to copy any novel behaviour. This study provides experimental evidence for body imitation, including production imitation, in killer whales that is comparable to that observed in dolphins tested under similar conditions. These findings suggest that imitative learning may underpin some of the group-specific traditions reported in killer whales in the field.