Determination of the depth distribution of subsurface damage during polishing of alumina

High-resolution grazing-incidence parallel-beam powder diffraction has been used to detect the subsurface damage below alumina surfaces subjected to polishing with cerium oxide or diamond. Despite very significant evolution of the surface morphology, no changes in the subsurface strains were observed over a 20min period of polishing with ceria. For both polishing materials, the variation with angle in the full-width at half-height maximum was successfully modelled by a strain distribution that fell exponentially with increasing depth. Although the surface amplitude and depth dependence parameter are coupled, we have been able to place upper limits on the depth to which the damage extends. Under realistic assumptions, the depth of damage induced by 1µm diamond paste is comparable with that from 3µm ceria polish.     

The kinetics of infralow-frequency viscoelastic internal friction induced by irreversible structural relaxation of a metallic glass

This letter presents the results of internal-friction measurements of Co 70 Fe 5 Si 15 B10 metallic glass at temperatures 400K h T h 700K and frequencies 0.01 Hz h f h 0.05Hz. It is shown that Maxwellian viscoelastic damping is predominant in this case. The nature of this damping is determined by irreversible structural relaxation. The kinetic relaxation law is derived.     

Growth orientation of one-dimensional silicon nanowires prepared by thermal evaporation

One-dimensional silicon nanowires have been grown by thermal evaporation and their growth orientations determined by transmission electron microscopy studies. The nanowires, which are often highly curved in morphology and heavily twinned in microstructure, are crystallographically separated into several sections, each with a characteristic crystallographic orientation along the wire axis. Straight nanowires, or straight sections in a curved nanowire, are found to have non-unique crystallographic orientations when {111} twinning occurs.     

Determination of electrostatic characteristics at a 24°, [001] tilt grain boundary in a SrTiO3 bicrystal by electron holography

The electrostatic potential and associated space charge across a 24°, [001] tilt boundary of SrTiO₃ ceramic have been determined using electron holography. The results reveal a positive charged interface with a negative space charge on either side. The form of the double Schottky barrier and the local charge-density distribution at the interface are derived from the results.     

Survey of plateau behaviour in the cyclic stress-strain curve of copper single crystals

Experimental results relating to the plateau behaviour in the cyclic stress-strain (CSS) curve of copper single crystals located on different sides of the stereographic triangle are summarized. Unlike the situation for single-sliporiented crystals, the crystallographic orientation has a strong effect on the plateau behaviour in the CSS curves of double- and multiple-slip-oriented crystals. The existence or non-existence of a plateau in the CSS curves, as well as the corresponding plateau stress amplitude, depend not only on the modes and intensities of dislocation interactions among slip systems operating in the crystals but also on the slip deformation characteristics associated with crystal orientations. The plateau region in CSS curve disappears only when multiple slip plays a determining role during cyclic deformation.     

Mechanical-milling-induced amorphization of Se: A crystallite destabilization model

Complete solid-state amorphization has been realized in elemental Se by means of mechanical milling of crystalline Se powder. Quantitative X-ray diffraction and thermal analyses were employed to characterize the amorphization process and indicated that the amorphization onset corresponds to a critical crystallite size and a drop in microstrain. During the major amorphization process, the remaining crystallite size remains unchanged with a constant lattice expansion. A new kinetics model of crystallite destabilization is proposed for the solid-state amorphization which satisfactorily explains the experimental observations.     

The orientation and temperature dependences of dislocation velocity in Ni 3 Al single crystals

The average velocities of screw dislocations in Ni 3 Al single crystals have been directly measured as a function of resolved shear stress (RSS) and orientation in the temperature domain of the flow stress anomaly using the etch-pit technique. The velocity was found to be extremely sensitive to the RSS in all cases. In contrast with ordinary metals, the screw dislocation velocities in Ni 3 Al show anomalous behaviour; under a constant RSS, the velocities decrease dramatically with increasing temperature. Furthermore, the velocities and the tension-compression asymmetry of the velocities depend on the orientation of applied stress.     

Structural and thermal investigations of a high-strength Cu-Zr-Ti-Co bulk metallic glass

Cu 55 Zr 30 Ti 10 Co 5 bulk metallic glass exhibits a high compressive fracture strength of 2.31 GPa and Young's modulus of 130 GPa, values that are higher than those of other Cu- and Zr-based metallic glasses. The addition of Co to the ternary Cu-Zr-Ti alloy stabilizes the supercooled liquid. On heating, the Cu 55 Zr 30 Ti 10 Co 5 metallic glass devitrified and formed an intermediate intermetallic compound prior to reaching equilibrium by diffusion-controlled growth at constant nucleation rate. In the fully annealed state the structure consists of the equilibrium Cu 10 Zr 7 phase with the slightly reduced lattice parameters a = 0.933 nm, b = 0.928 nm and c = 1.254 nm and a small fraction of an unidentified phase.     

Interactions of persistent slip bands with a grain boundary on the common primary slip plane in a copper bicrystal

In this letter, the dislocation patterns on the common primary slip plane in a fatigued \[1-34]-\[182-7] copper bicrystal with a Sigma=19b grain boundary (GB) have been investigated using the electron channelling contrast technique in a scanning electron microscope. The results show that the two-phase dislocation structure, such as veins and persistent slip band (PSB) walls, embedded within veins, can be clearly seen on the common primary slip plane. In particular, the interactions of PSBs with the GB are clearly revealed. It is found that there are three kinds of interaction mode between the GB and the dislocations during cyclic deformation, and those are discussed. It is suggested that the dislocations carried by PSBs cannot transfer through the GB continuously even though the bicrystal has a common primary slip plane and its surface slip bands are continuous across the GB.     

Crystallization behaviour of Al-based amorphous alloy and nanocomposites by rapid quenching

The microstructure and crystallization behaviour of melt-spun Al₈₈Ni₉Ce₂Fe₁ amorphous alloy and nanophase composites have been studied by means of X-ray diffraction, transmission electron microscopy and scanning and isothermal calorimetry. The diffraction patterns from Al₈₈Ni₉Ce₂Fe₁ amorphous alloys are diffuse, indicating a basically amorphous structure but contain two rings presumed to be associated with quenched-in nuclei. In the cases of Al₈₈Ni₉Ce₂Fe₁ nanophase composites, nanoscale precipitated particles are homogeneously dispersed in an amorphous matrix, and the crystallite diameter and volume fraction are sensitive to quenching conditions. During thermal crystallization, a two-step phase transformation occurs in the amorphous alloy and nanocomposites, which is characterized by a diffusion-controlled precipitation of nanoscale Al particles and the growth of a Al₃(Ni, Fe) nanophase prior to a Al₁₁Ce₃ nanophase. This study gives insight into structure-control for obtaining nanophases dispersed in an amorphous matrix by rapid quenching.