The kinetics of infralow-frequency viscoelastic internal friction induced by irreversible structural relaxation of a metallic glass

This letter presents the results of internal-friction measurements of Co 70 Fe 5 Si 15 B10 metallic glass at temperatures 400K h T h 700K and frequencies 0.01 Hz h f h 0.05Hz. It is shown that Maxwellian viscoelastic damping is predominant in this case. The nature of this damping is determined by irreversible structural relaxation. The kinetic relaxation law is derived.     

Determination of electrostatic characteristics at a 24°, [001] tilt grain boundary in a SrTiO3 bicrystal by electron holography

The electrostatic potential and associated space charge across a 24°, [001] tilt boundary of SrTiO₃ ceramic have been determined using electron holography. The results reveal a positive charged interface with a negative space charge on either side. The form of the double Schottky barrier and the local charge-density distribution at the interface are derived from the results.     

Design strategy for microalloyed ultra-ductile magnesium alloys

This article describes a design strategy deployed in developing ultra-ductile Mg alloys based on a microalloying concept, which aims to restrict grain growth considerably during alloy casting and forming. We discuss the efficiency of the design approach, and evaluate the resulting microstructural and mechanical properties. After processing, the so-designed alloys ZQCa3 (Mg–3Zn–0.5Ag–0.25Ca–0.15Mn, in wt.%) and ZKQCa3 (Mg–3Zn–0.5Zr–0.5Ag–0.25Ca–0.15Mn, in wt.%) reveal very fine grains (<10 µm), high ductility (elongation to fracture of up to 30%) at moderate strength or high strength (ultimate tensile strength of up to 350 MPa) at reasonable ductility. These properties are explained based on thermodynamic modelling, microstructure analysis including transmission electron microscopy studies, and microstructural and mechanical testing after annealing, and are compared to a related commercial alloy (ZK31).     

Structural and thermal investigations of a high-strength Cu-Zr-Ti-Co bulk metallic glass

Cu 55 Zr 30 Ti 10 Co 5 bulk metallic glass exhibits a high compressive fracture strength of 2.31 GPa and Young's modulus of 130 GPa, values that are higher than those of other Cu- and Zr-based metallic glasses. The addition of Co to the ternary Cu-Zr-Ti alloy stabilizes the supercooled liquid. On heating, the Cu 55 Zr 30 Ti 10 Co 5 metallic glass devitrified and formed an intermediate intermetallic compound prior to reaching equilibrium by diffusion-controlled growth at constant nucleation rate. In the fully annealed state the structure consists of the equilibrium Cu 10 Zr 7 phase with the slightly reduced lattice parameters a = 0.933 nm, b = 0.928 nm and c = 1.254 nm and a small fraction of an unidentified phase.     

Specific heat and low-field magnetocaloric effect in A-site ordered PrBaMn2O6 manganite

The specific heat and magnetocaloric effect (MCE) of A-site ordered PrBaMn₂O₆ manganite have been studied. The anomalies caused by the ferromagnetic (FM) and antiferromagnetic (AFM) phase transitions are revealed in the specific heat curve. Direct and inverse MCE are observed at the Curie and Néel points correspondingly. A value of the inverse MCE in the heating run is smaller than in the cooling regime. We attribute this effect to the competition between FM and AFM interactions. A significant advantage of PrBaMn₂O₆ as a magnetocaloric material is an MCE spanning a broad range of temperature with a maximum at room temperature.     

Role of cross-slipping in formation of edge dislocations in heteroepitaxial systems GeSi-on-Si(001) and Ge-on-InGaAs/GaAs

Edge misfit dislocations (MDs) formed as result of reactions between 60° glissile threading dislocations and 60° MDs lying on an intersecting glide plane were found in strained GeSi-on-Si(001) and Ge-on-InGaAs/GaAs films. It was demonstrated that dislocations penetrating from the InGaAs buffer layer to the strained Ge film can provoke formation of not only 60° MDs, but also edge MDs on the interface even at minor mismatch of the lattice parameters of the film and the InGaAs/GaAs virtual substrate.     

Cue competition effects in the planarian

The learning abilities of planarian worms (Dugesia tigrina) were assessed by using a number of Pavlovian conditioning paradigms. Experiment 1 showed that planaria were susceptible to basic conditioning in that they readily developed a conditioned response to a change in ambient luminance when it was consistently paired with an electric shock over a number of trials. In Experiment 2, the change in luminance was presented in a compound with a vibration stimulus during conditioning. Subsequent tests revealed poor conditioning of the elements compared with control groups in which the animals were conditioned in the presence of the elements alone, an instance of overshadowing. In Experiment 3, pre-training of one of the elements before compound conditioning resulted in blocking of learning about the other element. These results add to other studies that have reported cue competition effects in animal species belonging to different phyla (chordate, mollusk, arthropod), suggesting that learning in these phyla could be ruled by similar principles. The results are discussed adopting an evolutionary-comparative approach.