The contingent a priori and the publicity of a priori knowledge

Kripke maintains that one who stipulatively introduces the term ‘one meter’ as a rigid designator for the length of a certain stick s at time t is in a position to know a priori that if s exists at t then the length of s at t is one meter. Some (e.g., Soames 2003) have objected to this alleged instance of the contingent a priori on the grounds that the stipulator's knowledge would have to be based in part on substantive metalinguistic knowledge. I examine Soames's argument for the a posteriority of the relevant metalinguistic knowledge, and I argue that its main premise is false.     

中学生好胜心培养的实验研究

以积极的归因训练、表扬与奖励和适当的竞赛等手段对中学生的好胜心进行培养,通过一个学期三个阶段的培养,结果发现,实验班学生的好胜心水平增量显著高于对照班学生,实验班学生的学习成绩增量也显著高于对照班学生,好胜心水平与学习成绩存在着显著的正相关。研究表明,积极的归因训练、表扬与奖励、适当的竞赛是培养中学生好胜心的有效措施。     

Characterisation of magnesium oxide and its interface with α-Mg in Mg–Al-based alloys

Magnesium oxide (MgO) films and particles have been collected by pressurised filtration of a Mg-8.6wt%Al-0.67wt%Zn (AZ91D) alloy melt. The morphology of the oxides and their interfaces with the α-Mg phase were investigated by high-resolution transmission electron microscopy. It was found that the oxide films consisted of large numbers of sub-micrometre-sized MgO particles, and that melt shearing can effectively break up the oxide films and disperse the oxide particles. For the first time, orientation relationships (ORs) of OR I: [1?1?1]_MgO～2° from (0?0?0?1)_α-Mg and (0?1?1)_MgO?//[2?1?1?0)_α-Mg; and OR II: (1?1?1)_MgO//(1?1?0?1)_α-Mg and [0?1?1]_MgO//[1?2?1?1]_α-Mg, were observed between the MgO particles and the α-Mg matrix. The calculated Bramfitt planar disregistries were 5.5% and 2.5% for the two ORs, respectively, indicating good lattice matching between MgO and α-Mg at the interface. With the evidence of grain refinement effect observed in the sheared AZ91D magnesium alloy, the possibility of MgO particles to act as potent nucleants for heterogeneous nucleation of α-Mg grains is discussed in terms of the crystallographic criterion.     

TEM observation of oxide scale formed on a Ti–Al–Zr alloy oxidized at 360°C in alkaline steam

Ti–Al–Zr alloy has been oxidized at 360°C in alkaline steam at a pressure of 10.3?±?0.7?MPa. Cross-sectional transmission electron microscopy (TEM) observations indicated that the oxide scale of Ti–Al–Zr alloy was composed of outer and inner subscales, in which the outer layer consists of anatase-TiO₂ and the inner layer a mixture of TiO and Ti₂O. The thickness of the Ti₂O, TiO and anatase-TiO₂ were approximately 50, 100 and 400?nm, respectively. These results were confirmed by X-ray energy dispersive spectrometry (EDS) measurements. The enhanced corrosion of titanium alloys in LiOH solution is attributed to a high hexagonal Ti₂O to tetragonal TiO₂ phase transformation rate induced by the substitution of Li⁺ for Ti⁴⁺ in the oxide layer.     

Determination of atomic structure of phason planes in the ξ′-Al–Pd–Mn phase

The atomic structures of specific types of linear defects (phason lines) and planar defects (phason planes) in the complex metallic alloy phase ξ′-Al–Pd–Mn have been determined by high-resolution electron microscopy (HREM) and theoretical HREM simulation. The results show that a representational atomic structural model for phason planes can be constructed by introducing a shift between two parts of the perfect crystalline structure using a translation vector of r ?=?(1/2) a ?+?(1/2τ) c . This typical phason plane is normally parallel to the (001) plane of the ξ′-Al–Pd–Mn phase and consists of phason lines, which are arranged side-by-side with their linear direction parallel to the [010] axis. HREM simulations, based on the structural model for both edge-on and inclined types of phason lines, agree well with the experimental results. Taking into account the fact that the structural difference between various curved phason planes arises from the variation in the arrangement of individual phason lines, the atomic structures of the edge-on and inclined phason lines can be used to explain the various curved phason planes frequently observed in the ξ′-Al–Pd–Mn phase.     

Effect of aspect ratio on the compressive deformation and fracture behaviour of Zr-based bulk metallic glass

The compressive deformation and fracture features of Zr₅₉Cu₂₀Al₁₀Ni₈Ti₃ bulk metallic glassy samples with aspect ratios in the range of 0.67–2.00 have been investigated. The compressive plastic strain of the glass monotonically increases with decreasing aspect ratio, but the maximum strength almost maintains a constant value of 1.77–1.88?GPa. All the compressive shear-band angles are equal to?～40° if modified by the rotation of the primary shear bands.     

Wear behaviour of a gradient surface produced by a punching process in a Cu-30 Ni alloy

The grain size variation in a gradient surface produced by a punching and recovery process on a Cu-30Ni alloy has been observed by atomic force microscopy. The friction characteristics of the gradient surface in a 3.5 wt% NaCl solution were investigated using a micro-indenter probe, a pin-on-disc type tribometer, a strain sensor and an optical microscope. The results showed that the hardness and grain size can be well represented by the Hall–Petch relationship when the gain size is more than 30?nm. The wear rate, friction coefficient and adhesive force all increase depth below the surface. These variations are attributed to a gradual increasing grain size with depth. The morphologies of the worn track were also studied to understand further the corrosive wear behaviour of gradient surfaces.     

Four-phonon model of soft-matter quasicrystals for studying thermodynamics

Four-phonon model of soft-matter quasicrystals is proposed, in which there are three solid phonons and one fluid phonon. With this model, the vibration spectrum of soft-matter quasicrystals can be obtained. The generalized Debye frequency, generalized Debye temperature and the thermodynamic functions of soft-matter quasicrystals are observed. The results on the specific heat of soft-matter quasicrystals demonstrate the contributions of both solid phonons and fluid phonon, respectively.     

Short-term memory and working memory as indices of children's cognitive skills

In the current literature, empirical and conceptual distinctions have been drawn between a more or less passive short-term memory (STM) system and a more dynamic working memory (WM) system. Distinct tasks have been developed to measure their capacity and research has generally shown that, for adults, WM, and not STM, is a reliable predictor of general cognitive ability. However, the locus of the differences between the tasks has received little attention. We present data from children concerning measures of matrices reasoning ability, reading, and numerical skill along with forward and backward order serial recall of WM, STM, and STM with articulatory suppression tasks. As indices of children's cognitive skills, STM and WM are shown to be rather similar in terms of memory per se. Neither the opportunity for rehearsal nor task complexity provides satisfactory explanations for differences between memory tests.