Design of high entropy alloys based on the experience from commercial superalloys

High entropy alloys (HEAs) have been drawing increasing attention recently and gratifying results have been obtained. However, the existing metallurgic rules of HEAs could not provide specific information of selecting candidate alloys for structural applications. Our brief survey reveals that many commercial superalloys have medium and even to high configurational entropies. The experience of commercial superalloys provides a clue for helping us in the development of HEAs for structural applications.     

Grain orientation effects on dynamic strength of FCC multicrystals at low shock pressures: a hydrodynamic instability study

Variability in local dynamic plasticity due to material anisotropy in polycrystalline metals is likely to be important on damage nucleation and growth at low pressures. Hydrodynamic instabilities could be used to study these plasticity effects by correlating measured changes in perturbation amplitudes at free surfaces to local plastic behaviour and grain orientation, but amplitude changes are typically too small to be measured reliably at low pressures using conventional diagnostics. Correlations between strength at low shock pressures and grain orientation were studied in copper (grain size?≈?800 μm) using the Richtmyer–Meshkov instability with a square-wave surface perturbation (wavelength = 150 μm, amplitude = 5 μm), shocked at 2.7 GPa using symmetric plate impacts. A Plexiglas window was pressed against the peaks of the perturbation, keeping valleys as free surfaces. This produced perturbation amplitude changes much larger than those predicted without the window. Amplitude reductions from 64 to 88% were measured in recovered samples and grains oriented close to 〈0 0 1〉 parallel to the shock had the largest final amplitude, whereas grains with shocks directions close to 〈1 0 1〉 had the lowest. Finite element simulations were performed with elastic-perfectly plastic models to estimate yield strengths leading lead to those final amplitudes. Anisotropic elasticity and these yield strengths were used to calculate the resolved shear stresses at yielding for the two orientations. Results are compared with reports on orientation dependence of dynamic yielding in Cu single crystals and the higher values obtained suggest that strength estimations via hydrodynamic instabilities are sensitive to strain hardening and strain rate effects.     

Deformation behaviour and 6H-LPSO structure formation at nanoindentation in lamellar high Nb containing TiAl alloy

Microstructure and deformation mechanisms at a nanoindentation in the lamellar colony of high Nb containing TiAl alloy have been studied using the focused ion beam and the transmission electron microscopy. Considerable deformation twins are observed around the nanoindentation, and a strain gradient is generated. A continuous change in the bending angle of the lamellar structure can be derived, and a strain-induced grain refinement process is observed as various active deformations split the γ grains into subgrains. In addition to all possible deformation mechanisms (ordinary dislocation, super-dislocation and deformation twining) activated due to the heavy plastic deformation, a 6-layer hexagonal (6H) long-period stacking ordered structure is identified for the first time near the contact zone and is thought to be closely related to the glide of partial dislocations.     

Site preference and alloying effect of Re atoms in the edge dislocation cores in Ni3Al

Using Cambridge sequential total energy package method based on the density functional theory, we investigated the site preference and alloying effect of Re atoms in the [1 0 0] (0 1 0) edge dislocation cores in Ni₃Al. Due to the introduction of a Re atom, the energetic and electronic structure of dislocation core systems have been changed a lot. The binding energy results suggest Re atom prefers Al site, especially the centre site in the centre-Al system, which can be explained by the results of Mulliken orbital population and density of states. When Re atom occupies the centre site in the centre-Al system, the DC system has the highest stability and stronger bonds formed between the Re atom and its nearest neighbouring atom due to hybridization of the Re-5d and Ni-3d orbitals.     

Dynamic precipitation of Al–Zn alloy during rolling and accumulative roll bonding

In this study, cold rolling was performed on a binary Al–20 wt%Zn alloy and dynamic precipitation identified for the first time in Al alloys under cold rolling. Zn clusters formed after application of 0.6 strain, and the Zn phase precipitated upon further increasing strain. Both grain refinement and rolling-induced defects are considered to promote Zn precipitation. The hardness of Al–Zn alloy initially increased with strain up to a strain of 2.9 and then decreased with increasing rolling strain. Dynamic precipitation greatly affects the strengthening mechanism of the rolled Al–Zn alloy under various strains.     

Physiological Correlates of Choice‐Induced Dissonance: An Exploration of HPA‐Axis Responses

Choice can produce a negatively arousing cognitive conflict (called dissonance), which is thought to motivate the chooser to spread their preferences for the relevant options (called Spreading of Alternatives, or SA). The current work aimed to determine the relationship between HPA‐axis activity and both choice‐induced dissonance and its reduction (i.e. SA) among individuals with varying cultural backgrounds. European–Americans and Asians made a choice between two equally attractive CDs either in the presence of a cue indicative of social eyes (i.e. public‐choice condition) or in the absence thereof (i.e. private‐choice condition). As predicted, European–Americans and Asians showed a reliable SA primarily in the private and public choice conditions, respectively. Importantly, a sharp decline of salivary cortisol was observed over the span of 30 min, and, moreover, this decline was reliably predicted by the magnitude of SA regardless of either culture or the choice being private vs. public. These results suggest that although choice‐induced dissonance is too weak to elicit an HPA‐axis stress response, SA is associated with variability in the decline of salivary cortisol during the laboratory task. Copyright © 2015 John Wiley & Sons, Ltd.     

Fragility of Happiness Beliefs Across 15 National Groups

The belief that happiness is fragile—that it is fleeting and may easily turn into less favourable states—is common across individuals and cultures. However, not much is known about this belief domain and its structure and correlates. In the present study, we use multigroup confirmatory factor analysis and multilevel modelling to investigate the measurement invariance, cross-level isomorphism, predictive validity, and nomological network of the fragility of happiness scale across 15 nations. The results show that this scale has good statistical properties at both individual and cultural levels, and is associated with relevant psycho-social concepts in expected directions. The importance of the results, limitations, and potential directions for future research are discussed.