On the linearity of predefined and self‐anchoring Visual Analogue Scales

Two functional measurement studies were conducted to test the effect of two types of end anchors on the linearity of Visual Analogue Scale (VAS) data. With the first type of end anchors, participants responded to the stimuli using a VAS with predefined end anchors. With the second type, respondents defined the end anchors in terms of their own assumptions, perceptions, goals and values. The results show that VASs can be considered as linear scales and that the type of end anchors used has no effect on the linearity of the VAS data.     

Perceptual saliency of points along the contour of everyday objects: a large-scale study

The aim of this large-scale study was to find out which points along the contour of a shape are most salient and why. Many subjects (N=161) were asked to mark salient points on contour stimuli, derived from a large set of line drawings of everyday objects (N=260). The database of more than 200,000 marked points was analyzed extensively to test the hypothesis, first formulated by Attneave (1954), that curvature extrema are most salient. This hypothesis was confirmed by the data: Highly salient points are usually very close to strong curvature extrema (positive maxima and negative minima). However, perceptual saliency of points along the contour is determined by more factors than just local absolute curvature. This was confirmed by an extensive correlational analysis of perceptual saliency in relation to ten different stimulus factors. A point is more salient when the two line segments connecting it with its two neighboring salient points make a sharp turning angle and when the 2-D part defined by the triplet of salient points is less compact and sticks out more.     

TwoMP: A MATLAB graphical user interface for two-mode partitioning

Two-way two-mode data occur in almost every domain of scientific psychology. The information present in such data, however, may be hard to grasp because of the dimensions of one or both modes. Two-mode partitioning addresses this problem by breaking down both modes into a number of mutually exclusive and exhaustive subsets. Although such a technique may be very useful, up to now, software—and consequently, two-mode partitioning—has been available only to a handful of specialists in the field. In this article, we present a free, easy-to-use MATLAB graphical user interface (TwoMP) for two-mode partitioning models, specifically developed for nonspecialist users. A short formal introduction is given on the statistics of the method, and the basic use of TwoMP is demonstrated with an example.     

Religious/secular discourses and practices of good sex

This article focuses on the triangulation of sexuality, religion and secularity in Dutch society by analysing two contemporary case studies. We focus on sexual experiences and practices rather than sexual identities to further understand the constructions of what constitutes ‘good’ sex. The empirical research is situated in the Netherlands, where the binary of religion and sexual regulation versus secularity and sexual freedom has been dominant in both public and political discourse for a long time. Exploring sexual practices and narratives as central to the constitution of both religious and secular selves, we noted these to be fluctuating, inconsistent and subject to discourses. Our first case study discusses sexual experiences of non-heterosexual Protestant women, whereas the second explores the frequently considered ‘neutral’ notions of secularity in sexual education. Applying insights from both religious studies and queer studies, we bring the empirical study of sexuality together with the theoretical debates about the conceptualisation of the secular and the religious in contemporary Western Europe. This comparative approach to sexuality not only undermines the culturally presumed exclusive opposition of the secular and the religious but it also provides new empirical contributions for understanding the interactions between sexual practices and sexual discourses.     

From state neuroticism to momentary task performance: A person × situation approach

The goal of this article was to investigate the mechanisms through which personality relates to task performance. We argue that perceptions of work pressure and task complexity trigger momentary levels of neuroticism (i.e., state neuroticism) and that these momentary levels of neuroticism predict momentary task performance. Moreover, we hypothesized that the relationship between momentary job demands and state neuroticism is moderated by trait neuroticism. To test this model, we conducted an event reconstruction study and a day reconstruction study. The results revealed that trait neuroticism indeed moderated the momentary job demands–state neuroticism relationship, and in three out of four cases state neuroticism was found to mediate the relationship between momentary job demands and momentary task performance. From a practical point-of-view our results suggest that employees’ task performance can be improved by enhancing the way in which individuals perceive job demands. This strategy would be particularly helpful for individuals for whom the momentary job demands–state neuroticism relationship is the strongest (i.e., employees high in trait neuroticism).     

Enjoyment as a mediator in the relationship between task characteristics and work effort: An experience sampling study

We studied the mediating role of enjoyment in the relationship between task characteristics and work effort. To this end, an experience sampling study was implemented in which 50 employees reported on the characteristics of the task they were performing, their level of enjoyment, and their level of work effort five times a day for five working days. Results revealed that, at the concurrent level, task characteristics related to changes in task enjoyment, and that these changes were related to changes in work effort. Moreover, the relationships did not disappear when controlling for the three critical psychological states of the job characteristics model (i.e., experienced meaningfulness, experienced responsibility, and knowledge of the results). No cross-lagged relationships were found between enjoyment and work effort. Implications for studies on effort and motivation as well as practical implications are discussed.     

The Potential of Anamnestic Comparative Self-Assessment (ACSA) to Reduce Bias in the Measurement of Subjective Well-Being

Background: The conventional question (CQ) on subjective well-being (SWB) is e.g. “How is life?”, with ratings between e.g. ‘Best’ and ‘Worst possible’. Disadvantages may be casualness of responses and biases of proximate, peer or cultural relativity. Alternatively, with Anamnestic Comparative Self-Assessment (ACSA), the scale anchors are the respondents’ self-defined memories of their best and worst periods in life. Thus ACSA uses life review and experiential scale anchors. Objective: To compare the validity, sensitivity and responsiveness of the CQ and ACSA. Method: ACSA and the CQ were administered in parallel to 2584 university-hospital patients suffering from a wide range of psychiatric and somatic diseases. Results: ACSA and CQ did not measure the same construct (r = 0.50). CQ ratings were almost normally distributed, whereas ACSA ratings were overall lower, and clearly positively skewed, suggesting greater sensitivity to the respondents’ diseased state. Contrary to CQ, ACSA ratings of critically ill patients with end-stage liver disease were very low. After life-saving liver transplantation, ACSA ratings increased significantly more than CQ ratings, suggesting better responsiveness of ACSA to objective change. Trait-like socio-demographic variables such as sex, age, and marital status influenced CQ, but not ACSA ratings. Conclusion: In between-subject studies, depending on one’s study objectives, ACSA should be considered as a complement or an alternative to conventional SWB instruments. The CQ is probably preferable when socio-demographic variables are study endpoints. In longitudinal or intervention studies and for intercultural comparisons, ACSA, which reduces the need for correction of several biases or confounders, seems more useful.     

Identification of everyday objects on the basis of fragmented outline versions

Although Attneave (1954 Psychological Review 61 183 193) and Biederman (1987 Psychological Review 94 115-147) have argued that curved contour segments are most important in shape perception, Kennedy and Domander (1985 Perception 14 367-370) showed that fragmented object contours are better identifiable when straight segments are shown. We used the set of line drawings published by Snodgrass and Vanderwart (1980 Journal of Experimental Psychology: Human Learning and Memory 6 174-215), to make outline versions that could be used to investigate this issue with a larger and more heterogeneous stimulus set. Fragments were placed either around the 'salient' points or around the midpoints (points midway between two salient points), creating curved versus relatively straight fragments when the original outline was fragmented (experiment 1), or angular and straight fragments when straight-line versions were fragmented (experiment 2). We manipulated fragment length in each experiment except the last one, in which we presented only selected points (experiment 3). While fragmented versions were on average more identifiable when straight fragments were shown, certain objects were more identifiable when the curved segments or the angles were shown. A tentative explanation of these results is presented in terms of an advantage for straight segments during grouping processes for outlines with high part salience, and an advantage for curved segments during matching processes for outlines with low part salience.     

The awakening of Attneave's sleeping cat: identification of everyday objects on the basis of straight-line versions of outlines

Attneave (1954 Psychological Review 61 183-193) demonstrated that a line drawing of a sleeping cat can still be identified when the smoothly curved contours are replaced by straight-line segments connecting the positive maxima and negative minima of contour curvature. Using the set of line drawings by Snodgrass and Vanderwart (1980 Journal of Experimental Psychology: Human Learning and Memory 6 174-215) we made outline versions (with known curvature values along the contour) that can still be identified and that can be used to test Attneave's demonstration more systematically and more thoroughly. In five experiments (with 444 subjects in total), we tested identifiability of straight-line versions of 184 stimuli with different selections of points to be connected (using 24 to 28 subjects per stimulus per condition). Straight-line versions connecting curvature extrema were easier to identify than those based on inflections (where curvature changes sign), and those connecting salient points (determined by 161 independent subjects) were easier than those connecting midpoints. However, identification varied considerably between objects: some were almost always identifiable and others almost never, regardless of the selection criterion, whereas identifiability depended on the specific shape attributes preserved in the straight-line version of the outline in other objects. Results are discussed in relation to Attneave's original hypotheses as well as in the light of more recent theories on shape perception and object identification.     

Segmentation of object outlines into parts: a large-scale integrative study

In this study, a large number of observers (N=201) were asked to segment a collection of outlines derived from line drawings of everyday objects (N=88). This data set was then used as a benchmark to evaluate current models of object segmentation. All of the previously proposed rules of segmentation were found supported in our results. For example, minima of curvature (i.e. locations along the contour where negative curvature takes an extreme value) were often used as segmentation points. The second point of a pair connected by a segmentation line often depended on more global shape characteristics such as proximity, collinearity, symmetry, and elongation. Based on these results, a framework is presented in which all of the previously proposed (and now empirically validated) segmentation rules or rules for part formation are integrated.