Atomic imaging of the interface between M23C6-type carbide and matrix in a long-term ageing polycrystalline Ni-based superalloy

Besides the well-known cube-on-cube orientation relationship (OR) between M₂₃C₆ carbide and matrix, we have determined a new OR named as the twin-related OR in a long-term ageing Ni-based superalloy on the basis of the extensive and detailed electron diffraction analyses. Furthermore, by means of atomic-resolution high angle annular dark-field imaging technique which is implemented in the aberration-corrected scanning transmission electron microscope, we elucidated the interfacial characteristics between M₂₃C₆ and matrix for above two types of ORs. Taking into account of the interfacial characteristics, we propose that the twin-related OR possesses a higher total interfacial energy. Thus, its frequency of occurrence is lower than that of the cube-on-cube OR though both ORs are usually seen in the long-term ageing samples.     

汉语名词短语产生中的量词一致性效应

目前,语言产生领域的多数研究都集中在口语词语产生方面,许多研究者针对不同的语言系统的特色,对功能词进行了大量跨语言的研究。汉语量词是汉藏语系独有的功能词,本研究采用词图干扰范式,以名词短语和简单名词两种不同的图片命名任务,探讨了汉语量词的产生过程。实验结果发现,在名词短语命名任务下,存在量词的一致性效应;在名词命名的任务下,则不存在这种一致性效应。研究还发现语义干扰效应在两种不同命名任务下出现了分离。语义干扰效应只在命名名词的任务下出现,在命名名词短语的任务下未被发现。     

Quasicrystalline Al-Fe phase formed by ion mixing

Abstract

A quasicrystalline Al-Fe phase has been formed by room-temperature ion mixing of AI-Fe multiple layers with no additional postannealing. The quasicrystalline phase was dispersed as grain in an amorphous matrix. The size of the grains was about 10-30nm, and the composition was determined to be Al₈₀Fe₂₀. The structure of the quasicrystalline phase was identified by calculating some 20 sharp diffraction rings in the selected-area diffraction pattern and found to be similar to that of the rapidly quenched AI-Mn quasicrystalline phase.     

Characterisation of magnesium oxide and its interface with α-Mg in Mg–Al-based alloys

Magnesium oxide (MgO) films and particles have been collected by pressurised filtration of a Mg-8.6wt%Al-0.67wt%Zn (AZ91D) alloy melt. The morphology of the oxides and their interfaces with the α-Mg phase were investigated by high-resolution transmission electron microscopy. It was found that the oxide films consisted of large numbers of sub-micrometre-sized MgO particles, and that melt shearing can effectively break up the oxide films and disperse the oxide particles. For the first time, orientation relationships (ORs) of OR I: [1?1?1]_MgO～2° from (0?0?0?1)_α-Mg and (0?1?1)_MgO?//[2?1?1?0)_α-Mg; and OR II: (1?1?1)_MgO//(1?1?0?1)_α-Mg and [0?1?1]_MgO//[1?2?1?1]_α-Mg, were observed between the MgO particles and the α-Mg matrix. The calculated Bramfitt planar disregistries were 5.5% and 2.5% for the two ORs, respectively, indicating good lattice matching between MgO and α-Mg at the interface. With the evidence of grain refinement effect observed in the sheared AZ91D magnesium alloy, the possibility of MgO particles to act as potent nucleants for heterogeneous nucleation of α-Mg grains is discussed in terms of the crystallographic criterion.     

TEM observation of oxide scale formed on a Ti–Al–Zr alloy oxidized at 360°C in alkaline steam

Ti–Al–Zr alloy has been oxidized at 360°C in alkaline steam at a pressure of 10.3?±?0.7?MPa. Cross-sectional transmission electron microscopy (TEM) observations indicated that the oxide scale of Ti–Al–Zr alloy was composed of outer and inner subscales, in which the outer layer consists of anatase-TiO₂ and the inner layer a mixture of TiO and Ti₂O. The thickness of the Ti₂O, TiO and anatase-TiO₂ were approximately 50, 100 and 400?nm, respectively. These results were confirmed by X-ray energy dispersive spectrometry (EDS) measurements. The enhanced corrosion of titanium alloys in LiOH solution is attributed to a high hexagonal Ti₂O to tetragonal TiO₂ phase transformation rate induced by the substitution of Li⁺ for Ti⁴⁺ in the oxide layer.     

Effect of aspect ratio on the compressive deformation and fracture behaviour of Zr-based bulk metallic glass

The compressive deformation and fracture features of Zr₅₉Cu₂₀Al₁₀Ni₈Ti₃ bulk metallic glassy samples with aspect ratios in the range of 0.67–2.00 have been investigated. The compressive plastic strain of the glass monotonically increases with decreasing aspect ratio, but the maximum strength almost maintains a constant value of 1.77–1.88?GPa. All the compressive shear-band angles are equal to?～40° if modified by the rotation of the primary shear bands.     

Wear behaviour of a gradient surface produced by a punching process in a Cu-30 Ni alloy

The grain size variation in a gradient surface produced by a punching and recovery process on a Cu-30Ni alloy has been observed by atomic force microscopy. The friction characteristics of the gradient surface in a 3.5 wt% NaCl solution were investigated using a micro-indenter probe, a pin-on-disc type tribometer, a strain sensor and an optical microscope. The results showed that the hardness and grain size can be well represented by the Hall–Petch relationship when the gain size is more than 30?nm. The wear rate, friction coefficient and adhesive force all increase depth below the surface. These variations are attributed to a gradual increasing grain size with depth. The morphologies of the worn track were also studied to understand further the corrosive wear behaviour of gradient surfaces.     

Evaluating the Psychometric and Measurement Characteristics of a Measure of Sexual Orientation Harassment

We use classical test theory (CTT) and item response theory (IRT) methodologies to examine the psychometric and measurement properties of an instrument designed to assess sexual orientation harassment among military personnel (N?=?71,989). CTT analyses indicated that items were unidimensional and exhibited adequate levels of reliability. IRT analyses demonstrated that the items functioned similarly and exhibited appropriate levels of item discrimination. However, the analyses also suggested that the sensitivity of the items may be limited. Differential test functioning analyses provided evidence of the measurement equivalence of the instrument across male and female respondents. The findings provide support for the psychometric properties and measurement equivalence of the instrument for measuring sexual orientation harassment among male and female military personnel. We discuss the implications of our findings for future research on sexual orientation harassment in the workplace.