Deformation twinning and plastic recovery in Cu/Ag nanolayers under uniaxial tensile straining

Molecular dynamics simulations of nanoscale multilayered Cu/Ag metals have been conducted under uniaxial tensile straining to elucidate the out-of-plane deformation behaviour relevant to tensile spallation experiments. In nanolayers with pristine architectures, plastic dissipation prior to crack nucleation is suppressed owing to the high hydrostatic tensile stress state. The presence of sources for micro-twinning partials, such as micro-cracks or columnar grain boundaries, result in abundant deformation twin lamellae across multiple Cu/Ag interlayers. Plastic recovery is observed during unloading of the nanolayers.     

Effect of strain rate on the compressive behaviour of a Zr56Al10.9Ni4.6Cu27.8Nb0.7 bulk metallic glass

We report the study of the effect of strain rate on the compressive behaviour of a Zr₅₆Al_10.9Ni_4.6Cu_27.8Nb_0.7 bulk metallic glass. The results indicated that both the strength and plasticity of the glass increase with increasing the strain rate up to 10^?5 s^?1, above which the strength and plasticity start to decrease. The enhanced mechanical properties under a strain rate of 10^?5 s^?1 are due to the emission/propagation rate of the shear bands being consistent with the strain rate.     

Fabrication of opal-like thin films

A process is described for the fabrication of opal-like thin films by controlling a solid–liquid interface moving at an inclined glass substrate. A special airflow is adopted to control solvent evaporation. SEM images and photographs show that the films, composed of polystyrene spheres, are coloured, flat, uniform, packed multilayers, and are well arrayed over a large scale. The ordered domains range in size from 10 to 15?µm. The spheres in suspension crystallized, caused by an intense interaction between the spheres on the boundary between the suspension and the substrate. A wide photonic band gap is observed in the normal-incidence transmission spectra of the films fabricated by this method. Cracks and defects in the films are examined and discussed.     

Interactions between interfacial dislocations and γ/γ′ interface during high temperature – low stress creep in nickel-based single crystal superalloy

ABSTRACT

The interaction between interfacial dislocations and γ/γ′ interface is critical to the high temperature creep properties of single crystal superalloys. However, only a few studies have paid attention to the detailed structure such as local interfacial morphologies and the elemental distribution around interfacial dislocations. In this paper, the interfacial protrusions and related dislocations in a single crystal superalloy after creep at high temperature – low stress have been investigated in detail. It is found that the morphology and size of the interfacial protrusions remain almost the same during the early and middle stages of high temperature creep, which indicates a local equilibrium at the interfacial protrusions. Steps at different height are formed at the γ/γ′ interface at the initial stage of high temperature creep since dislocations could move along the γ/γ′ interface, which indicates that dislocation motion at different creep stage may affect the morphology of γ/γ′ interface.     

High-temperature creep associated with the climb of extended dislocations subjected to chemical stresses

The effect of chemical stresses upon the relation between extended dislocations and high-temperature creep in a thin plate has been investigated. The critical stress needed for the contraction of extended jogs and its effect on the creep rate are obtained. The results indicate that the critical stress needed for the contraction increases with decreasing stacking fault energy (SFE). However, creep occurs more easily with increasing SFE and increasing angle of the Burgers vector to the dislocation line, as well as with the concentration of any diffusing atoms.     

Survey of plateau behaviour in the cyclic stress-strain curve of copper single crystals

Experimental results relating to the plateau behaviour in the cyclic stress-strain (CSS) curve of copper single crystals located on different sides of the stereographic triangle are summarized. Unlike the situation for single-sliporiented crystals, the crystallographic orientation has a strong effect on the plateau behaviour in the CSS curves of double- and multiple-slip-oriented crystals. The existence or non-existence of a plateau in the CSS curves, as well as the corresponding plateau stress amplitude, depend not only on the modes and intensities of dislocation interactions among slip systems operating in the crystals but also on the slip deformation characteristics associated with crystal orientations. The plateau region in CSS curve disappears only when multiple slip plays a determining role during cyclic deformation.     

Enhancement on the faceted growth and the coarsening of the MnBi primary phase during the directional solidification under a high magnetic field

The effect of a high magnetic field on the morphology of the MnBi primary phase during the directional solidification has been investigated experimentally and the results show that an application of a high magnetic field has enhanced the faceted growth and the coarsening of the MnBi primary phase. This may be attributed to the effect of a high magnetic field on the diffusion of the solute Mn and the growth anisotropy of the MnBi crystal.     

Sol-gel-hydrothermal growth of oxide thin films at low temperatures

Lead zirconate titanate (PZT) (Pb(Zr_0.52Ti_0.48)O₃) and barium titanate (BaTiO₃) thin films have been successfully prepared using a novel sol-gel- hydrothermal (SG-HT) technique at low temperatures, which involves a combination of the conventional sol-gel process and a hydrothermal method. Highly (111)-oriented PZT thin films with a single perovskite phase and polycrystalline BaTiO thin films with well developed crystallites were obtained at a processing temperature as low as 160⁰C. The microstructural characteristics demonstrate that the SG-HT-derived PZT and BaTiO₃ thin films with good crystallinity and surface morphology are converted from the amorphous phase to the desired perovskite phase on platinum-coated and bare silicon substrates at a low processing temperature of 100-200 C. These results suggest that the SGHT technique, which is of great significance because of its low processing temperature, will become a potential and promising process for fabricating PZT, BaTiO₃ and other oxide thin films.     

Burnout and its relations with basic psychological needs and motivation among athletes: A systematic review and meta-analysis

ObjectivesThe present study is a review on studies about the relationships between the three basic psychological needs/motivational regulations (i.e., amotivation, controlled regulation, extrinsic autonomous regulation, and intrinsic motivation) and burnout.DesignA systematic review and meta-analysis.MethodStudies were identified through five electronic databases and manual search using combinations of three groups of keywords. Three inclusion criteria were then used to screen the searched articles.ResultsEighteen studies met the inclusion criteria and these studies varied considerably in terms of their study characteristics (e.g., characteristics of participants, study designs, and outcome measures). The results also showed that the three basic psychological needs, intrinsic motivation, extrinsic autonomous regulation, and amotivation had small to large effects on predicting global burnout and its three dimensions. However, controlled regulation showed no or weak correlations with the burnout subscales.ConclusionsSelf-determination theory was generally supported in explaining athlete burnout.     

Mapping the time course of the positive classification advantage: An ERP study

The aim of the present study was to investigate the time course of the positive advantage in the expression classification of faces by recording event-related potentials (ERPs). Although neutral faces were classified more quickly than either happy or sad faces, a significant positive classification advantage (PCA)—that is, faster classification for happy than for sad faces—was found. For ERP data, as compared with sad faces, happy faces elicited a smaller N170 and a larger posterior N2 component. The P3 was modulated by facial expressions with higher amplitudes and shorter latencies for both happy and neutral stimuli than for sad stimuli, and the reaction times were significantly correlated with the amplitude and latency of the P3. Overall, these data showed robust PCA in expression classification, starting when the stimulus has been recognized as a face revealed by the N170 component.