Brightness contrast: a reinterpretation of compound cue and combined cue experiments with pigeons.

A group of three pigeons was trained on a 4-ply multiple schedule: a green color and a vertical line superimposed upon an achromatic background as positive stimuli, and a red color and a horizontal line on an achromatic background as negative stimuli. The pigeons were tested with the vertical line superimposed upon different achromatic background intensities, then with the vertical line superimposed upon different green background intensities, and finally with the vertical line and its training achromatic backgfound attenuated (and unattenuated) by a neutral density filter. The gradients peaked at the luminance of the achromatic background used during training and at the equivalent luminance for the green background when it was substituted for the achromatic background. The brightness contrast, not the background luminance, was the critical variable as the neutral density filter attenuated both the line and the background equally, leaving brightness contrast unchanged; there was no response decrement to this attenuated stimulus. Two other groups of three pigeons showed that they attended to line orientation as well as to brightness contrast. The brightness contrast hypothesis was extended to explain results of attention experiments and combined cue experiments which have used line stimuli in combinations with different backgrounds.     

Evaluation of tablet computers for visual function assessment

Recent advances in technology and the increased use of tablet computers for mobile health applications such as vision testing necessitate an understanding of the behavior of the displays of such devices, to facilitate the reproduction of existing or the development of new vision assessment tests. The purpose of this study was to investigate the physical characteristics of one model of tablet computer (iPad mini Retina display) with regard to display consistency across a set of devices (15) and their potential application as clinical vision assessment tools. Once the tablet computer was switched on, it required about 13 min to reach luminance stability, while chromaticity remained constant. The luminance output of the device remained stable until a battery level of 5%. Luminance varied from center to peripheral locations of the display and with viewing angle, whereas the chromaticity did not vary. A minimal (1%) variation in luminance was observed due to temperature, and once again chromaticity remained constant. Also, these devices showed good temporal stability of luminance and chromaticity. All 15 tablet computers showed gamma functions approximating the standard gamma (2.20) and showed similar color gamut sizes, except for the blue primary, which displayed minimal variations. The physical characteristics across the 15 devices were similar and are known, thereby facilitating the use of this model of tablet computer as visual stimulus displays.     

Simultaneous lightness contrast on plain and articulated surrounds

Simultaneous lightness contrast is stronger when the dark and light backgrounds of the classic display (where one of the targets is an increment and the other is a decrement) are replaced by articulated fields of equivalent average luminances. Although routinely attributed to articulation per se, this effect may simply result from the increase in highest luminance in the light articulated, vs plain, background; by locally darkening the decremental target, such an increase would amplify the difference between the targets. We disentangled the effects of highest luminance and articulation by measuring, separately, the magnitude of lightness contrast on dark and light plain and articulated backgrounds. We found that highest luminance and articulation contribute separately to the final illusion.     

The peripheral drift illusion: a motion illusion in the visual periphery

Circularly repeating patches containing sawtooth luminance gradients produce a sensation of motion when viewed in the periphery. Illusory motion is perceived in a dark-to-light direction, but only when one's gaze is directed to different locations around the stimulus, a point outside the display is fixated and the observer blinks, or when the stimulus is sequentially displayed at different locations whilst the observer fixates one point. We propose that the illusion is produced by the interaction of three factors: (i) introducing transients as a result of eye movements or blinks; (ii) differing latencies in the processing of luminance; and (iii) spatiotemporal integration of the differing luminance signals in the periphery.     

A multichannel PC tachistoscope with high resolution and fast display change capability

The number of channels that PC tachistoscopes can have has increased recently (Bokhorst, 1995; Myors, 1998); however, neither the quality of display nor speed of image switching has been improved. This article shows the capability of VESA’s VBE 3.0 standard (1998) for increasing the number of channels of high-quality images. And the refresh rate can be set to the fastest cathode ray tube (CRT) scanning rate the monitor can tolerate in order to reduce the timing delay of changing display. A PCTSCOPE library was written in C to provide these capabilities, which is compatible with conventional DOS real mode. The PC tachistoscope can have numbers of channels with various resolutions and colors and different refresh rates. For example, 25 images with the resolution of 640 × 480 pixels and 256 colors can be loaded to video memory, and vertical refresh rate can be set to 180 Hz. It takes less than 6 msec to change the display among 25 channels in synchronizing with the start of the video scanning frame. In this library, the number of channels, the resolution of the images, and the speed of changing display all are improved. The multichannel PC tachistoscope with this technique is especially suitable for research requiring high-quality images and rapid successive presentation of stimuli.     

Lightness, equivalent backgrounds, and anchoring

Observers compared two center/surround configurations haploscopically. One configuration consisted of a standard surface surrounded by two, three, or four surfaces, each with a different luminance. The other configuration consisted of a comparison surface surrounded by a single annulus that varied in luminance. Center surfaces always had the same luminance but only appeared to have the same lightness with certain annuli (equivalent backgrounds). For most displays, the luminance needed to obtain an equivalent background was close to the highest luminance in the standard surround configuration. Models based on the space-average luminance or the space-average contrast of the standard surround configuration yielded poorer fits. Implications for computational models of lightness and for candidate solutions to the anchoring problem are discussed.     

Local and global processes in surface lightness perception

Various demonstrations show that a target of constant luminance can be made to appear darker in perceived lightness merely by introducing an adjacent region of higher luminance. This has often been interpreted as a manifestation of contrast effects produced by lateral inhibition, a relatively local process. An alternative interpretation holds that the highest luminance in such a display serves as an anchor that defines the white level. This interpretation is global in the sense that the anchor need not be located near any particular target in order to serve as its standard. Edge integration processes have been postulated that would enable such remote comparisons, but there is controversy about the strength of these processes. We report a series of experiments in which local and global processes were assessed. Specifically, we tested whether the introduction of a higher luminance has a greater darkening effect on an adjacent target than on a remote target. We found no difference, suggesting that the darkening effect is a matter of anchoring, not contrast, and that edge integration processes required by anchoring are relatively strong.     

Image quality of a mobile display under different illuminations

This study constructed the image quality models for a small mobile display under different ambient illumination levels using Group Method and Data Handling (GMDH) and described the relationship between perceived image quality and physical measurements. 33 college students took part in this experiment and were asked to evaluate the image quality under 1500 lux (typical indoor office illumination) and 7000 lux (simulated outdoor environment) in Stage One and Stage Two, respectively. In each stage, the participants had to evaluate 21 images. 17 sets of the data as a training set were used to build the model and four sets of the data as a testing set were used to verify the model. The results indicated that the effects of luminance, contrast, correlated color temperature (CCT), and resolution were significant on perceived image quality under 1500 lux. However, color temperature was not a significant physical characteristic, and an interaction between luminance and contrast was found below 7000 lux. From the results of the experiment, it is considered that the outdoor environment (7000 lux) is not suitable for using mobile displays. Finally, once a valid image quality model is built, the subjective image quality can be established when the measurements of significant physical characteristics are provided. The results of subjective ratings can also be provided for mobile display manufacturers to improve the product quality so that their products can meet customers' requirements.     

Symbolic magnitude modulates perceptual strength in binocular rivalry

Basic aspects of magnitude (such as luminance contrast) are directly represented by sensory representations in early visual areas. However, it is unclear how symbolic magnitudes (such as Arabic numerals) are represented in the brain. Here we show that symbolic magnitude affects binocular rivalry: perceptual dominance of numbers and objects of known size increases with their magnitude. Importantly, variations in symbolic magnitude acted like variations in luminance contrast: we found that an increase in numerical magnitude of adding one lead to an equivalent increase in perceptual dominance as a contrast increment of 0.32%. Our results support the claim that magnitude is extracted automatically, since the increase in perceptual dominance came about in the absence of a magnitude-related task. Our findings show that symbolic, acculturated knowledge about magnitude interacts with visual perception and affects perception in a manner similar to lower-level aspects of magnitude such as luminance contrast.     

When do luminance changes capture attention?

In two experiments, we examined the ability of task-irrelevant changes in luminance to capture attention in an irrelevant singleton search. By using uniform increment and decrement arrays, we were able to create changes of the same absolute magnitude, but resulting in a singleton with either higher or lower contrast magnitude, relative to other elements in the search array. A condition where a singleton changed contrast polarity without a concomitant change in the overall contrast magnitude was also included. It was found that only luminance changes resulting in a singleton having increased contrast (or saliency) were effective in capturing attention. In addition, no attentional capture was observed when the irrelevant singleton was characterized by the equivalent amount of static luminance differences, suggesting a unique attentional prioritization of luminance changes that increase singleton saliency.     

Lightness constancy through a veiling luminance

Observers were asked to select samples from a Munsell chart to match the lightness of seven identified surfaces in an outdoor scene they were shown. A separate group that was given the same task but viewed the same scene covered with a veiling luminance equal in intensity to the highest luminance in the scene selected almost the same matches. The same lightness constancy results were obtained using an abstract laboratory display to rule out memory color. These results challenge ratio and contrast theories because a veiling luminance, by adding a constant luminance to every poing in the image, dramatically alters luminance ratios. Lightness constancy was not obtained, however, when these three-dimensional real-world-type displays were replaced by a flat, Mondrian-type display consisting of surface grays from white to black, whether or not colored regions were present in the display; lightness matches were consistent with ratio predictions both with and without the veil.     

Use of a raster framebuffer in vision research

For the study of human and animal vision, the video framebuffer is the only technology that is capable of displaying two-dimensional images with precise control of contrast, luminance, and display timing. The video framebuffer also allows precise control of color. However, this device is not designed for precise psychophysical displays, and techniques must be developed to use them in this role. In this paper, we describe a number of basic methods used in our lab. In order to be concrete, we use an Adage RDS-3000 raster display system (Adage, 1982) as an example, since that is the device we have actually used. The Adage is hosted by a PDP-11/73 under the Venix operating system. The principles generalize to other machines. Where it clarifies the issues, we have shown the syntax of the software routines involved.     

The age deficit on photopic counterphase flicker: contrast, spatial frequency, and luminance effects.

This study evaluated the contribution of reduced contrast sensitivity and retinal illuminance to the age-related deficit on the temporal resolution of suprathreshold spatial stimuli. The discrimination of counterphase flicker was measured in optimally refracted young and elderly observers for sinusoidal gratings of three spatial frequencies (1, 4, and 8 cycles per degree) at three contrast levels (0.11, 0.33, and 0.66). Age deficits in flicker discrimination at the two higher contrast levels and at the two lower spatial frequencies were unrelated to observer contrast sensitivity. Flicker discrimination of young observers who carried out the task through .5 ND filters to simulate a two-thirds reduction of retinal illuminance in the older eye, was similar to that of the elderly observers. An age-related reduction in retinal luminance appears to be a major determinant of the age-related spatiotemporal deficit at suprathreshold contrast levels, although neural factors may also be involved.     

Luminance affects age-related deficits in object detection: implications for computerized psychological assessments

As psychological instruments are converted for administration on computers, differences in luminance and contrast of these displays may affect performance. Specifically, high-luminance assessments may mask age-group differences that are apparent under lower luminance conditions. We examined the effects of luminance and contrast on object detection using computerized and naturalistic assessments. Younger and older adults displayed more differences in performance across differing contrast levels in conditions that were matched for luminance, despite the conditions appearing perceptually different. These findings indicate that computerized assessments should be created with luminance levels that are similar to those of the tasks they purport to simulate in order to enhance their validity.     

Differential effect of luminance contrast reduction and noise on motion induction

Motion perception in a region is affected by motion in the surround regions. When a physically static or flickering stimulus surrounded by moving stimuli appears to move in the direction opposite to that of the surround motion, it is referred to as motion contrast. When the centre appears to move in the same direction, it is referred to as motion assimilation. We investigated how noise and luminance contrast affect motion induction by employing static and dynamic counterphase flickering targets. The tendency of motion assimilation was found to be stronger at a high noise level than at a low noise level for both static and dynamic targets. On the other hand, a decrease of luminance contrast tended to strengthen the tendency of motion contrast. However, the addition of noise and the decrease of luminance contrast decreased the visibility of motion comparably. These results suggest that the visual system changes the mode of motion induction according to the noise level, but not the visibility.     

The role of facial colour and luminance in visual and audiovisual speech perception

We conducted four experiments to investigate the role of colour and luminance information in visual and audiovisual speech perception. In experiments 1a (stimuli presented in quiet conditions) and 1b (stimuli presented in auditory noise), face display types comprised naturalistic colour (NC), grey-scale (GS), and luminance inverted (LI) faces. In experiments 2a (quiet) and 2b (noise), face display types comprised NC, colour inverted (CI), LI, and colour and luminance inverted (CLI) faces. Six syllables and twenty-two words were used to produce auditory and visual speech stimuli. Auditory and visual signals were combined to produce congruent and incongruent audiovisual speech stimuli. Experiments 1a and 1b showed that perception of visual speech, and its influence on identifying the auditory components of congruent and incongruent audiovisual speech, was less for LI than for either NC or GS faces, which produced identical results. Experiments 2a and 2b showed that perception of visual speech, and influences on perception of incongruent auditory speech, was less for LI and CLI faces than for NC and CI faces (which produced identical patterns of performance). Our findings for NC and CI faces suggest that colour is not critical for perception of visual and audiovisual speech. The effect of luminance inversion on performance accuracy was relatively small (5%), which suggests that the luminance information preserved in LI faces is important for the processing of visual and audiovisual speech.     

Luminance control of a small computer CRT display: A very cheap technique

An inexpensive way to produce continuous variation in the luminance of a computer-controlled CRT display is described. One application of that system to the study of motion-analyzers in human vision is discussed briefly.     

Reinstating salience effects over time: the influence of stimulus changes on visual selection behavior over a sequence of eye movements

Recently, we showed that salience affects initial saccades only in a static stimulus environment; subsequent saccades were unaffected by salience but, instead, were directed in line with task requirements (Siebold, van Zoest, & Donk, PLoS ONE 6(9): e23552, 2011). Yet multiple studies have shown that people tend to fixate salient regions more often than nonsalient ones when they are looking at images—in particular, when salience is defined by dynamic changes. The goal of the present study was to investigate how oculomotor selection beyond an initial saccade is affected by salience as derived from changing, as opposed to static, stimuli. Observers were presented with displays containing two fixation dots, one target, one distractor, and multiple background elements. They were instructed to fixate on one of the fixation dots and make a speeded eye movement to the target, either directly or preceded by an initial eye movement to the other fixation dot. In Experiment 1, target and distractor differed in orientation contrast relative to the background, such that one was more salient than the other, whereas in Experiments 2 and 3, the orientation contrast between the two elements was identical. Here, salience was implemented by a continuous luminance flicker or by a difference in luminance contrast, respectively, which was presented either simultaneously with display onset or contingent upon the first saccade. The results showed that in all experiments, initial saccades were strongly guided by salience, whereas second saccades were consistently goal directed if the salience manipulation was present from display onset. However, if the flicker or luminance contrast was presented contingent upon the initial saccade, salience effects were reinstated. We argue that salience effects are short-lived but can be reinstated if new information is presented, even when this occurs during an eye movement.     

An oblique effect of chromatic gratings measured by color-mixture thresholds

Contrast sensitivity is lower for obliquely oriented achromatic gratings than for vertical or horizontal gratings at high spatial and low temporal frequencies. Although this response is suggestive of mediation by P-pathway cortical correlates, no clear sensory (i.e. class 1) oblique effect has been demonstrated with isoluminant chromatic stimuli. In the present experiment, a two-alternative forced-choice detection task was used to measure observers' sensitivity to spatiotemporal sinusoids varying in orientation and color contrast. A maximum-likelihood method fit ellipses to the thresholds, with the length of each ellipse taken as a measure of chromatic contrast sensitivity at isoluminance, and the width as luminance contrast threshold. A chromatic oblique effect was observed at about 3 cycles deg-1 suggesting an orientation bias within the cortical stream conveying P-cell activity.