Meta-analytic methods of pooling correlation matrices for structural equation modeling under different patterns of missing data

Three methods of synthesizing correlations for meta-analytic structural equation modeling (SEM) under different degrees and mechanisms of missingness were compared for the estimation of correlation and SEM parameters and goodness-of-fit indices by using Monte Carlo simulation techniques. A revised generalized least squares (GLS) method for synthesizing correlations, weighted-covariance GLS (W-COV GLS), was compared with univariate weighting with untransformed correlations (univariate r) and univariate weighting with Fisher's z-transformed correlations (univariate z). These 3 methods were crossed with listwise and pairwise deletion. Univariate z and W-COV GLS performed similarly, with W-COV GLS providing slightly better estimation of parameters and more correct model rejection rates. Missing not at random data produced high levels of relative bias in correlation and model parameter estimates and higher incorrect SEM model rejection rates. Pairwise deletion resulted in inflated standard errors for all synthesis methods and higher incorrect rejection rates for the SEM model with univariate weighting procedures.     

Fixed- and random-effects meta-analytic structural equation modeling: Examples and analyses in R

Meta-analytic structural equation modeling (MASEM) combines the ideas of meta-analysis and structural equation modeling for the purpose of synthesizing correlation or covariance matrices and fitting structural equation models on the pooled correlation or covariance matrix. Cheung and Chan (Psychological Methods 10:40–64, 2005b, Structural Equation Modeling 16:28–53, 2009) proposed a two-stage structural equation modeling (TSSEM) approach to conducting MASEM that was based on a fixed-effects model by assuming that all studies have the same population correlation or covariance matrices. The main objective of this article is to extend the TSSEM approach to a random-effects model by the inclusion of study-specific random effects. Another objective is to demonstrate the procedures with two examples using the metaSEM package implemented in the R statistical environment. Issues related to and future directions for MASEM are discussed.     

Accounting for Missing Correlation Coefficients in Fixed-Effects MASEM

Meta-analytic structural equation modeling (MASEM) is increasingly applied to advance theories by synthesizing existing findings. MASEM essentially consists of two stages. In Stage 1, a pooled correlation matrix is estimated based on the reported correlation coefficients in the individual studies. In Stage 2, a structural model (such as a path model) is fitted to explain the pooled correlations. Frequently, the individual studies do not provide all the correlation coefficients between the research variables. In this study, we modify the currently optimal MASEM-method to deal with missing correlation coefficients, and compare its performance with existing methods. This study is the first to evaluate the performance of fixed-effects MASEM methods under different levels of missing correlation coefficients. We found that the often used univariate methods performed very poorly, while the multivariate methods performed well overall.     

Structural Equation Modeling in the Communication Sciences, 1995–2000

Structural equation modeling (SEM) is a viable multivariate tool used by communication researchers for the past quarter century. Building off Cappella (1975) as well as McPhee and Babrow (1987), this study summarizes the use of this technique from 1995–2000 in 37 communication‐based academic journals. We identify and critically assess 3 unique methods for testing structural relationships via SEM in terms of the specification, estimation, and evaluation of their respective structural equation models. We provide general guidelines for the use of SEM and make recommendations concerning latent variable models, sample size, reporting parameter estimates, model fit statistics, cross‐sectional data, univariate normality, cross‐validation, nonrecursive modeling, and the decomposition of effects (direct, indirect, and total).     

ETHNIC AND RACIAL SIMILARITY IN DEVELOPMENTAL PROCESS:

Abstract— Correlation matrices were computed on academic achievement and family environment measures using longitudinal data on siblings The 8 × 8 correlation matrices were computed on Hispanics, blacks, and whites separately When compared employing a LISREL method, the matrices were equal across these ethnic-racial groups Hence, developmental processes influencing academic achievement may be similar in Hispanics, blacks, and whites A structural equation model with four free parameters was fitted successfully to a correlation matrix pooled across groups As a single structural equation model fitted all groups, the existence of minority-specific developmental processes was not supported     

接纳承诺疗法的作用机制——基于元分析结构方程模型

接纳承诺疗法(Acceptance and Commitment Therapy, ACT)被认为是行为治疗“第三浪潮”的重要代表。本研究使用元分析结构方程模型, 考察ACT的作用机制。通过数据库检索与筛选, 最终纳入文献50篇。结果发现: ACT所假设的心理灵活性、接纳、此时此刻、价值的中介作用都达到统计显著, 认知解离这一中介变量并不显著; 中介机制在网络化干预中仍然得到检验; 相较之传统CBT, ACT在所假设的机制上有其区别于CBT的优势。后续临床研究应更全面地测量6大核心机制, 关注对美好生活提升的影响, 采用多点瞬时评价法, 并尽可能使用更高级、更先进的统计方法检验其作用机制。     

SEM with simplicity and accuracy

Professor Iacobucci has provided a useful introduction to the computer program LISREL, as well as to several technical topics in structural equation modeling (SEM). However, SEM has not been synonymous with LISREL for several decades, and focusing on LISREL's 13 Greek matrices and vectors is not the most intuitive way to learn SEM. It is possible today to do model specification via a path diagram without any need for filling in matrix elements. The simplest alternative is based on the Bentler–Weeks model, whose basic concepts are reviewed. Selected additional SEM topics are discussed, including some recent developments and their practical implications. New simulation results on model fit under null and alternative hypotheses are also presented that are consistent with statistical theory but in part seem to contradict those reported by Iacobucci.     

Identification and Small Sample Estimation of Thurstone's Unrestricted Model for Paired Comparisons Data

The interpretation of a Thurstonian model for paired comparisons where the utilities' covariance matrix is unrestricted proved to be difficult due to the comparative nature of the data. We show that under a suitable constraint the utilities' correlation matrix can be estimated, yielding a readily interpretable solution. This set of identification constraints can recover any true utilities' covariance matrix, but it is not unique. Indeed, we show how to transform the estimated correlation matrix into alternative correlation matrices that are equally consistent with the data but may be more consistent with substantive theory. Also, we show how researchers can investigate the sample size needed to estimate a particular model by exploiting the simulation capabilities of a popular structural equation modeling statistical package.     

无均值结构的潜变量交互效应模型的标准化估计

潜变量交互效应建模研究近年来有两项重要进展, 一是提出了潜变量交互效应模型的标准化估计及其计算公式; 二是发现无均值结构模型可以取代传统的有均值结构模型, 建模大为简化。但标准化估计是在传统的有均值结构模型中建立的, 在简化的模型中同样适用吗？本文在无均值结构模型的框架内, 给出了潜变量交互效应模型的标准化形式、计算公式和建模步骤, 并通过模拟研究比较了极大似然和广义最小二乘两种估计方法、配对乘积指标和全部乘积指标两种指标类型, 结果表明, 在计算交互效应的标准化估计时, 应当使用配对乘积指标建模, 并且首选极大似然估计。     

More efficient parameter estimates for factor analysis of ordinal variables by ridge generalized least squares

Data in psychology are often collected using Likert‐type scales, and it has been shown that factor analysis of Likert‐type data is better performed on the polychoric correlation matrix than on the product‐moment covariance matrix, especially when the distributions of the observed variables are skewed. In theory, factor analysis of the polychoric correlation matrix is best conducted using generalized least squares with an asymptotically correct weight matrix (AGLS). However, simulation studies showed that both least squares (LS) and diagonally weighted least squares (DWLS) perform better than AGLS, and thus LS or DWLS is routinely used in practice. In either LS or DWLS, the associations among the polychoric correlation coefficients are completely ignored. To mend such a gap between statistical theory and empirical work, this paper proposes new methods, called ridge GLS, for factor analysis of ordinal data. Monte Carlo results show that, for a wide range of sample sizes, ridge GLS methods yield uniformly more accurate parameter estimates than existing methods (LS, DWLS, AGLS). A real‐data example indicates that estimates by ridge GLS are 9–20% more efficient than those by existing methods. Rescaled and adjusted test statistics as well as sandwich‐type standard errors following the ridge GLS methods also perform reasonably well.     

Structural equation modeling: reviewing the basics and moving forward

This tutorial begins with an overview of structural equation modeling (SEM) that includes the purpose and goals of the statistical analysis as well as terminology unique to this technique. I will focus on confirmatory factor analysis (CFA), a special type of SEM. After a general introduction, CFA is differentiated from exploratory factor analysis (EFA), and the advantages of CFA techniques are discussed. Following a brief overview, the process of modeling will be discussed and illustrated with an example using data from a HIV risk behavior evaluation of homeless adults (Stein & Nyamathi, 2000). Techniques for analysis of nonnormally distributed data as well as strategies for model modification are shown. The empirical example examines the structure of drug and alcohol use problem scales. Although these scales are not specific personality constructs, the concepts illustrated in this article directly correspond to those found when analyzing personality scales and inventories. Computer program syntax and output for the empirical example from a popular SEM program (EQS 6.1; Bentler, 2001) are included.     

Robust Structural Equation Modeling with Missing Data and Auxiliary Variables

The paper develops a two-stage robust procedure for structural equation modeling (SEM) and an R package rsem to facilitate the use of the procedure by applied researchers. In the first stage, M-estimates of the saturated mean vector and covariance matrix of all variables are obtained. Those corresponding to the substantive variables are then fitted to the structural model in the second stage. A sandwich-type covariance matrix is used to obtain consistent standard errors (SE) of the structural parameter estimates. Rescaled, adjusted as well as corrected and F-statistics are proposed for overall model evaluation. Using R and EQS, the R package rsem combines the two stages and generates all the test statistics and consistent SEs. Following the robust analysis, multiple model fit indices and standardized solutions are provided in the corresponding output of EQS. An example with open/closed book examination data illustrates the proper use of the package. The method is further applied to the analysis of a data set from the National Longitudinal Survey of Youth 1997 cohort, and results show that the developed procedure not only gives a better endorsement of the substantive models but also yields estimates with uniformly smaller standard errors than the normal-distribution-based maximum likelihood.     

How to Generate Non-normal Data for Simulation of Structural Equation Models

A procedure for generating non-normal data for simulation of structural equation models is proposed. A simple transformation of univariate random variables is used for the generation of data on latent and error variables under some restrictions for the elements of the covariance matrices for these variables. Data on the observed variables is then computed from latent and error variables according to the model. It is shown that by controlling univariate skewness and kurtosis on pre-specified random latent and error variables, observed variables can be made to have a relatively wide range of univariate skewness and kurtosis characteristics according to the pre-specified model. Univariate distributions are used for the generation of data which enables a user to choose from a large number of different distributions. The use of the proposed procedure is illustrated for two different structural equation models and it is shown how PRELIS can be used to generate the data.     

Reliability of Summed Item Scores Using Structural Equation Modeling: An Alternative to Coefficient Alpha

A method is presented for estimating reliability using structural equation modeling (SEM) that allows for nonlinearity between factors and item scores. Assuming the focus is on consistency of summed item scores, this method for estimating reliability is preferred to those based on linear SEM models and to the most commonly reported estimate of reliability, coefficient alpha.     

Comparing standardized coefficients in structural equation modeling: a model reparameterization approach

We propose a two-stage method for comparing standardized coefficients in structural equation modeling (SEM). At stage 1, we transform the original model of interest into the standardized model by model reparameterization, so that the model parameters appearing in the standardized model are equivalent to the standardized parameters of the original model. At stage 2, we impose appropriate linear equality constraints on the standardized model and use a likelihood ratio test to make statistical inferences about the equality of standardized coefficients. Unlike other existing methods for comparing standardized coefficients, the proposed method does not require specific modeling features (e.g., specification of nonlinear constraints), which are available only in certain SEM software programs. Moreover, this method allows researchers to compare two or more standardized coefficients simultaneously in a standard and convenient way. Three real examples are given to illustrate the proposed method, using EQS, a popular SEM software program. Results show that the proposed method performs satisfactorily for testing the equality of standardized coefficients.     

The common fate model for dyadic data: variations of a theoretically important but underutilized model

Studying dyads, very often there is a theoretical construct that has an effect on both members, such as relationship harmony or shared environment. To model such influences, the common fate model (CFM) is often the most appropriate approach. In this article, we address conceptual and statistical issues in the use of the standard CFM and present a series of variations, all of which are estimated by structural equation modeling (SEM). For indistinguishable dyad members (e.g., gay couples), we describe the use of a multilevel SEM method. Throughout the paper, we draw connections to the actor-partner interdependence model (APIM). We also discuss the analysis of hybrid models that combines both the CFM and the APIM. The models are illustrated using data from heterosexual couples.     

贝叶斯结构方程模型及其研究现状

在心理学研究中结构方程模型(Structural Equation Modeling, SEM)被广泛用于检验潜变量间的因果效应, 其估计方法有频率学方法(如, 极大似然估计)和贝叶斯方法两类。近年来由于贝叶斯统计的流行及其在结构方程建模中易于处理小样本、缺失数据及复杂模型等方面的优势, 贝叶斯结构方程模型发展迅速, 但其在国内心理学领域的应用不足。主要介绍了贝叶斯结构方程模型的方法基础和优良特性, 及几类常用的贝叶斯结构方程模型及其应用现状, 旨在为应用研究者介绍新的研究工具。