On the glass transition temperature and the elastic properties in Zr-based bulk metallic glasses

The temperature dependence of the elastic moduli was estimated from ultrasound time of flight measurements performed on bulk metallic glasses of composition Zr_{63? x} Cu₂₄Al _x Ni₁₀Co₃. Using the corresponding values at the glass transition temperature, the local atomic strain was determined. The obtained values for the critical atomic strain calculated for 8 at%?<?x?<?15 at% are close to the predicted universal criterion derived from a topological model, but may also reflect the difference in the chemical interaction that are not accounted by a topological approach.     

From ultrafast to slow: Heating rate dependence of the glass transition temperature in metallic systems

When a solid crosses the glass transition, viscous flow sets in and the glass transforms into a supercooled liquid. The glass transition temperature exhibits a heating rate dependence which was previously observed to follow a Vogel–Fulcher–Tammann (VFT) equation. Here we report on a change in the heating rate dependence of the glass transition, determined by the distinct increase in the specific heat capacity, of a metallic glass. We combine standard techniques such as differential scanning calorimetry with recently developed ohmic heating techniques in order to cover seven orders of magnitude in heating rate. Contrary to previous reports, our results show that the change of the glass transition temperature cannot be described by a single VFT equation. Instead we find two distinct regimes which independently follow a VFT expression.     

Effect of lithium-ion irradiation on the crystallization kinetics of glassy Se98In2

Differential scanning calorimetry (DSC) has been used to study the crystallization kinetics of glassy Se₉₈In₂ both before and after irradiation of the alloy with high-energy (50 MeV) lithium ions. After the ion-irradiation, significant changes in the kinetic parameters of crystallization of the glass were observed. The results are explained in terms of a model involving irradiation-induced defects.     

Intrinsic factor controlling the deformation and ductile-to-brittle transition of metallic glasses

The energetic driving force and resistance for shearing and cracking in metallic glasses (MGs) are quantitatively evaluated. A universal thermodynamic criterion is proposed for better understanding the intrinsic correlations between fracture toughness and Poisson’s ratio, the competitions between various deformation modes and the ductile-to-brittle transition in MGs and other materials. A new cooperation parameter δ is also introduced to depict quantitatively the relative propensity of shearing versus cracking. This work could provide insights into the long-standing issues of deformation mechanisms of glassy materials, and be helpful in searching for ductile and tough MGs.     

A structural model for surface-enhanced stabilization in some metallic glass formers

A structural model for surface-enhanced stabilization in some metallic glass formers is proposed. In this model, the alloy surface structure is represented by five-layer Kagomé-net-based lateral ordering. Such surface structure has intrinsic abilities to stabilize icosahedral-like short-range order in the bulk, acting as ‘a cloak of liquidity’. In particular, recent experimental observations of surface-induced lateral ordering and a very high glass forming ability of the liquid alloy Au₄₉Ag_5.5Pd_2.3Cu_26.9Si_16.3 can be united using this structural model. This model may be useful for the interpretation of surface structure of other liquid alloys with a high glass forming ability. In addition, it suggests the possibility of guiding the design of the surface coating of solid containers for the stabilization of undercooled liquids.     

On the plasticity event in metallic glass

Based on a systematic molecular dynamics analysis, this study reveals that plastic deformation of metallic glass is not through a uniform configuration change but via many localized plasticity events. These events are manifested by the atomic clusters of high kinetic energy and high strain rate, emerging even in the elastic deformation regime. The life of such a plasticity event is on the order of 10^?12?s, during which the distribution of kinetic energy follows a power law. The study shows that yielding in metallic glass occurs at the sudden surge point of the number of plasticity events. In the steady plastic deformation regime, the continuous nucleation and annihilation of the plastic events lead to a steady flow stress and stabilized total potential energy.     

Electronegativity difference as a factor for evaluating the thermal stability of Al-rich metallic glasses

This article proposes a factor, the critical electronegativity difference Δx _cri, to correlate alloy composition with thermal stability and glass-forming ability of Al–Ni–RE (RE: Rare Earth element) ternary metallic glasses. The Al-rich metallic glasses with Δx > Δx _cri exhibit glassy behavior, whereas alloys with Δx < Δx _cri are nanocrystalline. Nanoglassy alloys occur when Δx ≈ Δx _cri. The best glass formers are located near Δx _cri. Furthermore, an equation has been deduced to calculate Δx _cri with varying RE covalent atomic radius.     

Reversible phase transition in vanadium oxide films sputtered on metal substrates

Vanadium oxide films, deposited on aluminium (Al), titanium (Ti) and tantalum (Ta) metal substrates by pulsed RF magnetron sputtering at a working pressure of 1.5 x10^?2 mbar at room temperature are found to display mixed crystalline vanadium oxide phases viz., VO₂, V₂O₃, V₂O₅. The films have been characterized by field-emission scanning electron microscopy, X-ray diffraction, differential scanning calorimetry (DSC) and X-ray photoelectron spectroscopy, and their thermo-optical and electrical properties have been investigated. Studies of the deposited films by DSC have revealed a reversible-phase transition found in the temperature range of 45–49 °C.     

Understanding the shear band interaction in metallic glass

Qualitative and quantitative models were proposed to understand the shear band (SB) interaction scenario found in the compressive tests on specimen with two symmetrical semi-circular notches. The so-called ‘work-hardening’ behavior could be ascribed as the stress interaction which was caused by stress fields around the SB tips. Besides, the SB bending was observed along propagation orientation. The quantitative analysis based on traditional shear deformation mechanism could reasonably account for how the SB was bent. It is anticipated that the present work could provide a pathway to understand the deep SB deformation mechanism of metallic glass.     

Religious transition: beliefs and life histories of some Canadian Anglo Catholics

There are a range of communities within the Anglican communion that seek to maintain a more orthodox or Catholic emphasis. One of these is the Traditional Anglican Communion. In 2009 the Vatican announced a special accommodation to allow these Anglicans to enter the Catholic Church and to retain key aspects of their Anglican usage and practice. As such many of these communities have sought to formalise their links with Rome. At this important historical juncture this study utilises a qualitative narrative approach to explore the life histories of members of a small community of Canadian Traditional Anglicans. It explores in detail the salient beliefs of these individuals and as such contributes to the growing discourse on the importance of beliefs in the sociology of religion.     

Dendrite growth velocity in the undercooled melt of glass forming Ni50Zr50 compound

Glass-forming Ni₅₀Zr₅₀ intermetallic compound is containerless undercooled and solidified using electrostatic levitation. Large undercoolings up to ?T = 300 K are achieved. The dendrite growth velocity of the congruently melting alloy is measured as a function of undercooling using a high-speed camera technique. The experimental data is analysed within a sharp interface theory. It is found that the driving force of crystallisation is controlling the growth kinetics at ?T < 250 K but at larger undercoolings the growth kinetics is progressively controlled by atomic diffusion. This leads to a slowing down of the growth velocity. The maximum velocity and the temperature at which the maximum occurs (T_max) are inferred from the dendrite growth velocity – undercooling relation. The relation of the temperature T_max and the glass temperature fits into a general classification scheme for glass-forming systems. The kinetic and thermal undercooling terms are calculated within dendrite growth theory as a function of the total undercooling. At ?T > 126 K, the kinetic undercooling dominates and increases rapidly with the undercooling ?T. The maximum prefactor of the kinetic undercooling is plotted vs. the reciprocal temperature. Its temperature dependence is discussed.     

Thermal behaviour of poly(methyl methacrylate)/fullerene composite films

ABSTRACT

Poly(methyl methacrylate) films and poly(methyl methacrylate)/fullerene composite films were fabricated by casting from toluene solutions. The mass fraction of fullerene (C₆₀) was varied from 0.05–3?wt. %. The effect of the fullerene (C₆₀) content on the thermal degradation parameters of the composite films was evaluated by thermogravimetric (TG) analysis. It was found that the incorporation of C₆₀ improved the thermal stability of the polymers. The films eventually decomposed in three stages. Incorporation of fullerene caused a change in the distribution of mass loss over the stages of degradation in comparison with the pristine polymer. Using differential scanning calorimetry (DSC), the phase transitions from the glassy state to the elastic one was studied for the examined polymeric materials. New data relating to the effect of C₆₀ on the glass transition temperature of composites with low weight fractions of filler were obtained. Specifically, for films containing up to 0.1 wt. % of C₆₀, a single glass transition temperature was found, whereas for composites with a higher concentration of filler, two glass transition temperatures were recorded.     

Human walk-to-run transition in the context of the behaviour of complex systems

This study had two main aims: 1) to investigate if the walk-to-run (WR-) transition occurs when the speed of locomotion is kept constant below the WR-transition speed (speed clamp) and the stride rate is increased monotonously using a metronome and 2) to investigate if diversion of attention and awareness from the locomotion process influences the position of the WR-transition in stride rate, stride length, and locomotion speed (SrSlLs) space.Eighteen healthy individuals (13 men and 5 women) were recruited (age: 23.9 ± 1.5 years, height: 1.77 ± 0.10 m and body mass: 77.3 ± 12.8 kg). Stride-by-stride stride rates, stride lengths, locomotion speeds, and duty factors were determined on a treadmill in 4 different tests: 1) reference WR-transition, 2) preferred walking speed, 3) dual-task test including arithmetic calculations and 4) four speed clamp bouts with different initial velocities.Walk-to-run transitions were elicited in all participants in the speed clamp bouts. When the stride rate ramp was clamped at preferred walking speed the WR-transition stride rate was not significantly different from the WR-transition stride rate during the reference test (t = 2.2, p = 0.312). However, in the SrSlLs space the speed clamp WR-transitions all deviated from the position of the reference WR-transition. Additionally, it was demonstrated that intensive attentional diversion using a dual-task paradigm had very little influence on the position of the WR-transition in the SrSlLs space.It is argued that these observations can be explained in the context of the behavior of complex systems.     

Nanoscale inclusions in the phonon glass thermoelectric material Zn4Sb3

We have investigated the thermoelectric material Zn₄Sb₃ using transmission electron microscopy (TEM). Nanoscale inclusions with a diameter of about 10 nm were observed, constituting on the order of 1% by volume of the material. Studies using energy filtered imaging, electron diffraction, and high-angle annular dark-field STEM indicate that the inclusions consist of Zn. These inclusions are expected to scatter the medium and long-wavelength phonons effectively, thus contributing to phonon glass behavior which results in the exceptionally low thermal conductivity for this thermoelectric material.     

Assessment of data glasses for motorcycle riders in a simulated lane change test

Relevant riding information such as speed or navigation instructions are typically displayed in head down dashboards on Powered Two-Wheelers. Data glasses provide information directly in the field of view and could, therefore, reduce glances away from the roadway ahead to focus on the dashboard. This study aimed to examine whether providing information in data glasses while riding as compared to classical head down displays makes a difference. Therefore, a total of N = 24 riders completed the ISO lane change test on a motorcycle riding simulator. Meanwhile, riders had to react to changing turn-by-turn indications which were either displayed in the dashboard, in the data glasses or redundantly in both display technologies. The performance in the lane change test and the reaction times achieved in the secondary task were examined along with riders’ workload by means of the Detection Response Task (DRT) and questionnaire data. Results revealed that riders’ lane change performances did not differ between the conditions ‘data glasses’ and ‘dashboard’. Information displayed in the data glasses was recognized faster and fewer turn-by-turn indications were missed. The performance in the DRT remained unchanged throughout the test conditions, while the subjective workload experience decreased with the use of data glasses. Overall, the results suggest that data glasses did not provoke an attentional capture effect and were, therefore, not inferior compared to dashboards regarding riding performance. However, data glasses did reduce the perceived workload and may in particular provide a safety benefit when time-critical information, such as warnings, need to be displayed.     

Chemistry (intrinsic) and inclusion (extrinsic) effects on the toughness and Weibull modulus of Fe-based bulk metallic glasses

Systematic changes in composition were employed to increase the notch toughness of a variety of Fe-based Bulk Metallic Glasses (BMGs). The Fe₅₀Mn₁₀Mo₁₄Cr₄C₁₆B₆ BMG possessed very high hardness (e.g. 12 GPa) but very low notch toughness (e.g. 5.7 MPa m^1/2) at room temperature, consistent with fracture surface observations of brittle features. Many of the other Fe-BMG variants, created to change the Poisson's ratio via systematic changes in alloy chemistry, exhibited higher toughness but more scatter in the data, reflected in a lower Weibull modulus. SEM examination revealed fracture initiation always occurred at inclusions in samples exhibiting lower toughness and/or Weibull modulus for a given chemistry. Implications of these observations on reliability of BMGs are discussed.