Postural sway and joint kinematics during quiet standing are affected by lumbar extensor fatigue

The purpose of this study was to investigate changes in postural sway and strategy elicited by lumbar extensor muscle fatigue. Specifically, changes in center of mass (COM), center of pressure (COP), and joint kinematics during quiet standing were determined, as well as selected cross correlations between these variables that are indicative of movement strategy. Twelve healthy male participants stood quietly both before and after exercises that fatigued the lumbar extensors. Whole-body movement and ground reaction force data were recorded and used to calculate mean body posture and variability of COM, COP, and joint kinematics during quiet standing. Three main findings emerged. First, participants adopted a slight forward lean post-fatigue as evidenced by an anterior shift of the COM and COP. Second, post-fatigue increases in joint angle variability were observed at multiple joints including joints distal to the fatigued musculature. Despite these increases, anterior-posterior (AP) ankle angle correlated well with AP COM position, suggesting the body still behaved similar to an inverted pendulum. Third, global measures of sway based on COM and COP were not necessarily indicative of changes in individual joint kinematics. Thus, in trying to advance our understanding of how localized fatigue affects movement patterns and the postural control system, it appears that joint kinematics and/or multivariate measures of postural sway are necessary.     

Changes in muscle and joint coordination in learning to direct forces

While it has been suggested that bi-articular muscles have a specialized role in directing external reaction forces, it is unclear how humans learn to coordinate mono- and bi-articular muscles to perform force-directing tasks. Participants were asked to direct pedal forces in a specified target direction during one-legged cycling. We expected that with practice, performance improvement would be associated with specific changes in joint torque patterns and mono- and bi-articular muscular coordination. Nine male participants practiced pedaling an ergometer with only their left leg, and were instructed to always direct their applied pedal force perpendicular to the crank arm (target direction) and to maintain a constant pedaling speed. After a single practice session, the mean error between the applied and target pedal force directions decreased significantly. This improved performance was accompanied by a significant decrease in the amount of ankle angular motion and a smaller increase in knee and hip angular motion. This coincided with a re-organization of lower extremity joint torques, with a decrease in ankle plantarflexor torque and an increase in knee and hip flexor torques. Changes were seen in both mono- and bi-articular muscle activity patterns. The mono-articular muscles exhibited greater alterations, and appeared to contribute to both mechanical work and force-directing. With practice, a loosening of the coupling between bi-articular thigh muscle activation and joint torque co-regulation was observed. The results demonstrated that participants were able to learn a complex and dynamic force-directing task by changing the direction of their applied pedal forces through re-organization of joint torque patterns and mono- and bi-articular muscle coordination.     

Weighted vest effects on impact forces and joint work during vertical jump landings in men and women

Weighted vest (WV) use during vertical jump landings (VJL) does not appear to alter peak vertical ground reaction forces (GRF) or peak joint torques. However, WV effects on joint work and sex differences during VJL are not well understood. This study assessed WV effects on vertical GRF and sagittal joint work during VJL in men and women. Twelve men and 12 women performed VJL wearing a WV with zero added mass (unloaded) and with 10% body mass (loaded) while GRF and kinematic data were obtained. Mixed-model analyses of variance (α = 0.05) and effect sizes (ES) were used to assess differences between sexes and/or load conditions. Regardless of sex, greater landing height (p < 0.001; ES = 0.37) and peak vertical GRF (p = 0.001; ES 0.51) occurred when unloaded, while greater landing time (p = 0.001; ES = 0.46) and negative lower extremity work (p < 0.001; ES = 0.41) occurred when loaded through greater negative work about the hip (p = 0.001; ES = 0.27) and ankle (p = 0.020; ES = 0.27). No differences in hip (p = 0.753; ES = 0.03), knee (p = 0.588; ES = 0.07), or ankle (p = 0.580; ES = 0.09) joint displacement were detected between loaded and unloaded conditions. Men exhibited greater landing heights (p < 0.001; ES = 2.49) and greater peak vertical GRF than women (p = 0.007; ES = 1.18), though women exhibited greater negative lower extremity work (p < 0.001; ES = 1.98) than men through greater negative knee (p < 0.001; ES = 1.98) and ankle (p = 0.032; ES = 0.94) work. No sex differences were detected for joint angular displacement about the hip (p = 0.475; ES = 0.30), knee (p = 0.666; ES = 0.18), or ankle (p = 0.084; ES = 0.71). These data revealed a unique load accommodation strategy during VJL with a WV characterized by greater lower extremity joint work performed via increased joint torque despite lesser landing height and peak vertical GRF. Women appear to perform greater lower extremity joint work than men during VJL despite lesser landing height and peak vertical GRF. Current and prospective WV users should be aware of their load accommodation strategy during VJL with an external load. Women may consider developing more refined load accommodation strategies for VJL regardless of whether external loading is applied to avoid performing excessive amounts of lower extremity work.     

Quadriceps Torque,Peak Variability and Strength Endurance in Patients after Anterior Cruciate Ligament Reconstruction: Impact of Local Muscle Fatigue

Abstract

We tested if ACL-reconstructed participants show a decreased quadriceps torque, a lower muscle endurance capacity and a higher peak torque variability compared to unimpaired control participants prior to and following local muscle fatigue. Participants (n?=?19, 10 women; 25?±?5yrs.) with unilateral hamstrings autograft ACL-reconstruction and a matched unimpaired control group were recruited. Participants performed two maximal isometric voluntary force (MIVF) contractions of the knee extensors. In between, standardized local muscle fatigue was induced. ACL-reconstructed knees display a lower peak torque of the knee extensors in comparison to the contralateral limb (3.2?±?.3Nm/kg vs. 3.5?±?.3 Nm/kg). Peak torque variability and fatigue resistance were not affected by local muscle fatigue (p > .05). Participants with ACL-reconstructed knees show a persistent quadriceps muscle dysfunction. This dysfunction and lower limb side asymmetries might be risk factors for ACL re-ruptures.     

Gender differences in the variability of lower extremity kinematics during treadmill locomotion

The authors examined whether there were gender differences in the variability of basic gait parameters (stride length, stride time) and 3-dimensional (3D) rotations of the hip, knee, and ankle joints during treadmill locomotion of 18 men and 15 women at 4 different gait speeds (walking at 5 km/hr, running at 8, 10, and 12 km/hr). The authors used 2-way analyses of variance to assess the data. No gender differences in the mean values or variability of basic gait parameters were detected. However, the women exhibited lower variability than did the men for 6 individual joint rotations: (a) transverse plane rotations of the ankle joint at 8, 10, and 12 km/hr, (b) transverse plane rotations of the hip and knee joints at 12 km/hr, and (c) sagittal plane rotations of the ankle joint at 12 km/hr. When collapsed across all 3D lower extremity rotations, the data showed that the women had lower variability than did the men at 12 km/hr. Reduced variability may result in more localized mechanical stress on anatomical structures and could therefore be a risk factor for injury in women at high gait speeds. The results also suggested that gender differences in variability may not be consistent across different levels of the motor system.     

Dynamics of the ankle joint analyzed through moment-angle loops during human walking: gender and age effects

Aim of this study was to provide a non-invasive assessment of the dynamic properties of the ankle joint during human locomotion, with specific focus on the effects of gender and age. Accordingly, flexion-extension angles and moments, obtained through gait analysis, were used to generate moment–angle loops at the ankle joint in 120 healthy subjects walking at a same normalized speed. Four reproducible types of loops were identified: Typical Loops, Narrow, Large and Yielding loops. No significant changes in the slopes of the main loop phases were observed as a function of gender and age, with the exception of a relative increase in the slope of the descending phase in elderly males compared to adult females. As for the ergometric parameters, the peak ankle moment, work produced and net work along the cycle were slightly, but significantly affected, with progressively decrease in the following order: Adult Males, Adult Females, Elderly Males and Elderly Females. The evidence that only few of the quantitative aspects of moment–angle loops were affected suggests that the control strategy which regulates the biomechanical properties of the ankle joint during walking is rather robust and qualitatively consistent across genders and age.     

A comparison of the mechanical effect of arm swing and countermovement on the lower extremities in vertical jumping

The purposes of this study were to quantify and compare how arm swing and countermovement affect lower extremity torque and work during vertical jumping and to gain insight into the mechanisms that enable the arm swing and countermovement to increase jump height. Five participants maximally performed two types of vertical squat jumps with (SJA) and without (SJ) an arm swing and two types of countermovement vertical jumps with (CJA) and without (CJ) an arm swing. The participants jumped from a force platform and all performances were videotaped with a high-speed video camera (200Hz). Jump heights, joint torques and work were calculated by combining kinematic and kinetic data. It was found that of the four jumping conditions, the participants jumped highest when they used an arm swing with countermovement (i.e., CJA). The increase of the countermovement jump height with an arm swing is the result of the increase of the lower extremity work. In the hip joint, the increase in torque caused by the countermovement predominantly occurred at the beginning of the propulsion phase, while the increase in torque caused by the arm swing occurred in the rest of the propulsion phase. A key finding of our study is that arm swing and countermovement have independent effects on lower extremity work, and their effects are additive in CJA to produce greater jump height.     

Effect of knee extensors muscles fatigue on bilateral force accuracy,variability, and coordination

The aim of this study was to test the effect of fatigue of the knee extensors muscles on bilateral force control accuracy, variability, and coordination in the presence and absence of visual feedback. Twenty-two young physically active subjects (18 males, 4 females) were divided into two groups and performed 210 submaximal sustained bilateral isometric contractions of knee extensors muscles with and without visual feedback. One group performed a symmetrical task—both legs were set at identical positions (60° knee flexion)—while the other group performed an asymmetrical task (60° and 30° knee flexion). We used the framework of the uncontrolled manifold hypothesis to quantify two variance components: one of them did not change total force (V_UCM), while the other did (V_ORT). Performance of bilateral isometric contractions reduced voluntary and electrically induced force without changes in bilateral force control variability and accuracy. Bilateral force production stability and accuracy were higher in both tasks with visual feedback. Synergistic (anti-phase) structure of force control between the lower limbs occurred and the values of synergy index were higher only during the performance of the asymmetrical task with visual feedback. In addition, greater bilateral force control accuracy was observed during the performance of the asymmetrical task (with and without visual feedback), despite no differences in within-trial variability of both tasks.     

Development of infant leg coordination: Exploiting passive torques

Leg joint coordination systematically changes over the first months of life, yet there is minimal data on the underlying change in muscle torques that might account for this change in coordination. The purpose of this study is to investigate the contribution of torque changes to early changes in leg joint coordination. Kicking actions were analyzed of 10 full-term infants between 6 and 15-weeks of age using three-dimensional kinematics and kinetics. We found 11 of 15 joint angle pairs demonstrated a change from more in-phase intralimb coordination at 6-weeks to less in-phase coordination at 15-weeks. Although the magnitude of joint torques normalized to the mass of the leg remained relatively consistent, we noted more complex patterns of torque component contribution across ages. By focusing on the change in torques associated with hip–knee joint coordination, we found that less in-phase hip–knee joint coordination at 15-weeks was associated with decreased influence of knee muscle torque and increased influence of knee gravitational and motion-dependent torques, supporting that infants coordinate hip muscle torque with passive knee gravitational and motion-dependent torques to generate kicks with reduced active knee muscle torque. We propose that between 6 and 15-weeks of age less in-phase hip–knee coordination emerges as infants exploit passive dynamics in the coordination of hip and knee motions.     

Age-related changes of arm movements in dual task condition when walking on different surfaces

The purpose of this study was to investigate whether the dual task paradigm would influence arm movements during walking. Furthermore, we examined the effects of different walking surfaces on arm movements while performing dual tasks. The effects of age and gender were also investigated. Fifteen young adults and 15 older adults were included in this study. Subjects were asked to perform the walking task alone (single-task trial) and walking in combination with a cognitive task (dual-task trial). Four walking conditions (1 single task and 3 dual task trials)×two walking surfaces were encountered. Both age groups had greater elbow and trunk movement in the sagittal plane under the dual task trials as compared to the single task trial (p<.05). Subjects had greater upper extremity and upper body movement on the soft floor than on the hard floor (p<.05). Subjects had greater movement amplitude when confronting a challenging environment, especially in the contralateral side. Among gender, there was a group-gender interaction: the older females had smaller upper extremity movement than the older males (p<.05) but the opposite was true for the young adults. The results suggest that different age groups of males and females use different balance control strategy to deal with the challenging conditions.     

Nonlinear approach to study the acute effects of static and dynamic stretching on local dynamic stability in lower extremity joint kinematics and muscular activity during pedalling

Researchers have reported contradictory results on the effect of static and dynamic stretching on subsequent performance. Due to the importance of performance through static and dynamic stretching, the aim of this study is to investigate the acute effects of static and dynamic stretching protocols on local dynamic stability in lower extremity joint kinematics and muscular activities during pedalling using a nonlinear dynamics approach. Using a randomised crossover trial design, fifteen active males participated voluntarily in this research (mass: 69.02 ± 10.52 kg, height: 174.00 ± 6.74 cm, and age: 21.20 ± 1.47 years) and completed a pedalling trial in situations of without stretching (WS), after static (SS), and dynamic stretching (DS) of lower extremity. The lower extremity joint angles in the sagittal plane and the electrical activity of soleus, gastrocnemius medialis, tibialis anterior, vastus medialis, biceps femoris, and rectus femoris muscles were collected during 30 pedalling cycles at 70 rates per minute. The results of the repeated measure ANOVA indicated that the knee and ankle angle largest LyE was significantly lower in DS compared to WS and SS. The largest LyE in muscle activity is also significantly lower for all the muscles after DS compared to WS and SS (P ≤ 0.05). Regarding the positive effects of DS on the joints and the muscle activity local dynamic stability, it is suggested to use DS than SS in the warm-up program before repetitive activities like pedalling.     

Changes in coordination and variability during running as a function of head stability demands

The purpose of this study was to identify changes in segment/joint coordination and coordination variability in running with increasing head stability requirements. Fifteen strides from twelve recreational runners while running on a treadmill at their preferred speed were collected. Head stability demands were manipulated through real-time visual feedback that required head-gaze orientation to be contained within boxes of different sizes, ranging from 21 to 3 degrees of visual angle in 3-degree decrements. Coordination patterns and coordination variability were assessed between head and trunk segments, hip and knee joints, and knee and ankle joints in the three cardinal planes, respectively. Mean coupling angles and the standard deviation of the coupling angles at each individual point of the stance phase were calculated using a modified vector coding technique and circular statistics. As head stability demands increased, transverse plane head-trunk coordination was more anti-phase and showed increased head‑leading and decreased trunk‑leading patterns; for the lower extremity, there was increased in-phase and decreased anti-phase sagittal plane coordination. Increased head stability demands also resulted in an increase in coordination variability for both upper body and lower extremity couplings during the second half of the stance phase. Overall, the results provide evidence that coordinative adaptations to increasing head stability demands occur throughout the entire body: 1) through more independent control of the head relative to the trunk; 2) by increasing in-phase coordination between lower extremity joints, and 3) through increased coordination variability in the second half of stance in both upper body segmental and lower extremity joint couplings. These adaptations likely contribute to the reduction of the range of motion of the trunk in vertical direction.     

Directional variability of the isometric force vector produced by the human hand in multijoint planar tasks

Numerous studies have examined control of force magnitude, but relatively little research has considered force direction control. The subjects applied isometric forces to a handle and the authors compared within-trial variability when force is produced in different directions. The standard deviation of the force parallel to the prescribed direction of force production increased linearly with the targeted force level, as did the standard deviation of the force perpendicular to the instructed direction. In contrast, the standard deviation of the angle of force production decreased with increased force level. In the 4 (of 8) instructed force directions where the endpoint force was generated due to a joint torque in only 1 joint (either the shoulder or elbow) the principal component axes in force space were well aligned with the prescribed direction of force production. In the other directions, the variance was approximately equal along the 2 force axes. The variance explained by the first principal component was significantly larger in torque space compared to the force space, and mostly corresponded to positive correlation between the joint torques. Such coordinated changes suggest that the torque variability was mainly due to the variability of the common drive to the muscles serving 2 joints, although this statement needs to be supported by direct studies of muscle activation in the future.     

Directional Variability of the Isometric Force Vector Produced by the Human Hand in Multijoint Planar Tasks

Numerous studies have examined control of force magnitude, but relatively little research has considered force direction control. The subjects applied isometric forces to a handle and the authors compared within-trial variability when force is produced in different directions. The standard deviation of the force parallel to the prescribed direction of force production increased linearly with the targeted force level, as did the standard deviation of the force perpendicular to the instructed direction. In contrast, the standard deviation of the angle of force production decreased with increased force level. In the 4 (of 8) instructed force directions where the endpoint force was generated due to a joint torque in only 1 joint (either the shoulder or elbow) the principal component axes in force space were well aligned with the prescribed direction of force production. In the other directions, the variance was approximately equal along the 2 force axes. The variance explained by the first principal component was significantly larger in torque space compared to the force space, and mostly corresponded to positive correlation between the joint torques. Such coordinated changes suggest that the torque variability was mainly due to the variability of the common drive to the muscles serving 2 joints, although this statement needs to be supported by direct studies of muscle activation in the future.     

Lower limb kinematic variability in dancers performing drop landings onto floor surfaces with varied mechanical properties

Elite dancers perform highly skilled and consistent movements. These movements require effective regulation of the intrinsic and extrinsic forces acting within and on the body. Customized, compliant floors typically used in dance are assumed to enhance dance performance and reduce injury risk by dampening ground reaction forces during tasks such as landings. As floor compliance can affect the extrinsic forces applied to the body, secondary effects of floor properties may be observed in the movement consistency or kinematic variability exhibited during dance performance. The aim of this study was to investigate the effects of floor mechanical properties on lower extremity kinematic variability in dancers performing landing tasks. A vector coding technique was used to analyze sagittal plane knee and ankle joint kinematic variability, in a cohort of 12 pre-professional dancers, through discrete phases of drop landings from a height of 0.2 m. No effect on kinematic variability was observed between floors, indicating that dancers could accommodate the changing extrinsic floor conditions. Future research may consider repeat analysis under more dynamic task constraints with a less experienced cohort. However, knee/ankle joint kinematic variability was observed to increase late in the landing phase which was predominantly comprised of knee flexion coupled with the terminal range of ankle dorsiflexion. These findings may be the result of greater neural input late in the landing phase as opposed to the suggested passive mechanical interaction of the foot and ankle complex at initial contact with a floor. Analysis of joint coordination in discrete movement phases may be of benefit in identifying intrinsic sources of variability in dynamic tasks that involve multiple movement phases.     

A linked muscular activation model for movement generation and control

A new model for movement control is presented which incorporates characteristics of impulse-variability and mass-spring models. Movements in the model were controlled with phasic torque impulses in agonist and antagonist muscles and a tonic agonist torque. Characteristics of the phasic agonist and antagonist torque profiles were based on observed properties of movement-related EMGs and muscle isometric torques. Variability of the phasic impulses depended on impulse magnitude as in impulse-variability models. The model therefore predicted a speed-accuracy tradeoff for limb movement. The time of onset and magnitude of the antagonist torque depended on the magnitude of the preceding agonist torque as indicated in studies of movement-related EMGs. This led to the new concept of linkage between the agonist and antagonist muscle forces which was shown to be important for reducing variability of fast movements. Progressive development of linkage during practice could explain the previous findings of decreased movement variability with practice coupled with increased variability of movement-related EMGs. It was concluded that an inherently variable motor system deals with the variability associated with generation of large muscle forces by linking the forces produced by opposing muscles. In this way, variability in net joint torques and in movements can be decreased without the need for the nervous system to closely regulate the individual torques.     

A Linked Muscular Activation Model for Movement Generation and Control

A new model for movement control is presented which incorporates characteristics of impulse-variability and mass-spring models. Movements in the model were controlled with phasic torque impulses in agonist and antagonist muscles and a tonic agonist torque.

Characteristics of the phasic agonist and antagonist torque profiles were based on observed properties of movement-related EMGs and muscle isometric torques. Variability of the phasic impulses depended on impulse magnitude as in impulse-variability models. The model therefore predicted a speed-accuracy tradeoff for limb movement. The time of onset and magnitude of the antagonist torque depended on the magnitude of the preceding agonist torque as indicated in studies of movement-related EMGs. This led to the new concept of linkage between the agonist and antagonist muscle forces which was shown to be important for reducing variability of fast movements. Progressive development of linkage during practice could explain the previous findings of decreased movement variability with practice coupled with increased variability of movement-related EMGs.

It was concluded that an inherently variable motor system deals with the variability associated with generation of large muscle forces by linking the forces produced by opposing muscles. In this way, variability in net joint torques and in movements can be decreased without the need for the nervous system to closely regulate the individual torques.     

The Effect of Load on Torques in Point-to-Point Arm Movements: A 3D Model

A dynamic, 3-dimensional model was developed to simulate slightly restricted (pronation-supination was not allowed) point-to-point movements of the upper limb under different external loads, which were modeled using 3 objects of distinct masses held in the hand. The model considered structural and biomechanical properties of the arm and measured coordinates of joint positions. The model predicted muscle torques generated by muscles and needed to produce the measured rotations in the shoulder and elbow joints. The effect of different object masses on torque profiles, magnitudes, and directions were studied. Correlation analysis has shown that torque profiles in the shoulder and elbow joints are load invariant. The shape of the torque magnitude-time curve is load invariant but it is scaled with the mass of the load. Objects with larger masses are associated with a lower deflection of the elbow torque with respect to the sagittal plane. Torque direction–time curve is load invariant scaled with the mass of the load. The authors propose that the load invariance of the torque magnitude–time curve and torque direction–time curve holds for object transporting arm movements not restricted to a plane.     

数学成就的性别差异

数学成就的性别差异是多年来广受关注的问题。长期以来人们多关注男性、女性数学成就水平的高低, 而近年来研究结果一方面揭示出总体上男性和女性数学成就的平均水平差异很小, 呈现出相似性多于差异性的特点; 同时也显示男性内部变异比女性更大, 男性在高数学成就者中占多数。数学成就性别差异的大小和方向受到评分系统、测验组织形式、测验内容和难度的影响。数学成就性别差异的形成是心理、生物、社会文化等方面多因素综合作用的结果。近期研究探讨了年龄、遗传和进化、激素和脑、刻板印象威胁、社会性别公平和时代等因素在数学成就性别差异的形成中的作用。未来对数学成就性别差异的研究应注意开展追踪研究, 关注低数学能力者, 进一步探讨复杂数学加工机制的性别差异, 建立数学成就性别差异形成机制的综合模型, 并在更广阔的社会文化背景下开展研究。     

Synergistic interaction between ankle and knee during hopping revealed through induced acceleration analysis

The forces produced by the muscles can deliver energy to a target segment they are not attached to, by transferring this energy throughout the other segments in the chain. This is a synergistic way of functioning, which allows muscles to accelerate or decelerate segments in order to reach the target one. The purpose of this study was to characterize the contribution of each lower extremity joint to the vertical acceleration of the body’s center of mass during a hopping exercise. To accomplish this, an induced acceleration analysis was performed using a model with eight segments. The results indicate that the strategies produced during a hopping exercise rely on the synergy between the knee and ankle joints, with most of the vertical acceleration being produced by the knee extensors, while the ankle plantar flexors act as stabilizers of the foot. This synergy between the ankle and the knee is perhaps a mechanism that allows the transfer of power from the knee muscles to the ground, and we believe that in this particular task the net action of the foot and ankle moments is to produce a stable foot with little overall acceleration.