Anisotropic grain growth kinetics in nanocrystalline nickel

ABSTRACT

Intriguing properties exhibited by nanocrystalline metals, including a high level of mechanical strength, arise from their nanometer-scale grain sizes. It is critical to determine the evolution of grain size of nanocrystalline materials at elevated temperature, as this process can drastically change the mechanical properties. In this work, a nanocrystalline Ni foil with grain size ～ 25?nm was annealed in situ in an X-ray diffractometer. X-ray diffraction peaks were analysed to determine the grain growth kinetics. The grain growth exponents obtained were ～ 2–4 depending upon the crystallographic direction, indicating the anisotropic nature of the grain growth kinetics.     

Dynamic balance between grain refinement and grain growth during high-pressure torsion of Cu powders

High-pressure torsion (HPT) was applied to unmilled coarse-grained (CG) Cu powders with low initial dislocation density and cryomilled nanocrystalline (nc) Cu powders with high initial dislocation density, with identical processing parameters. HPT of unmilled CG Cu powders resulted in exceptional grain refinement and increase in dislocation density, whereas significant grain growth and decrease in dislocation density occurred during HPT of cryomilled nc Cu powders. Equilibrium structures were achieved under both conditions, with very similar stable grain sizes and dislocation densities, suggesting dynamic balances between deformation-induced grain refinement and grain growth, and between deformation-induced dislocation accumulation and dislocation annihilation. The equilibrium structures are governed by these two dynamic balances.     

Stress-enhanced grain growth in a nanostructured aluminium alloy during spark plasma sintering

In this study, we report on the influence of high pressure on the microstructure evolution of cryomilled nanostructured Al alloy powders during spark plasma sintering (SPS). Our experimental results suggest that the particular mechanism that governs grain growth during SPS depends on the magnitude of the applied pressure. In the case of material consolidated at a high pressure (e.g. 500 MPa), grain coarsening occurs via a combination of thermally activated grain boundary (GB) migration, stress-coupled GB migration and grain rotation-induced grain coalescence. In contrast, in the case of the material consolidated at a low pressure (50 MPa), grain growth occurs primarily via thermally activated GB migration.     

Enhanced grain growth in yttria-doped zirconia thin film structures synthesized under photon irradiation

Enhanced grain growth in ultra-thin yttria-doped zirconia (YDZ) films synthesized under ultraviolet (UV) irradiation is reported. The mean grain size in UV-synthesized 7.5 mol% YDZ films nearly 56 nm thick increased to 85 nm upon annealing in an oxygen-rich ambient at 900°C for 1 h, while in thermally grown YDZ they grew only to ～15 nm under identical annealing conditions. In situ electron microscopy kinetic studies reveal an enhanced kinetic constant and self-limiting grain growth behaviour in the UV-synthesized oxide films. The difference between UV and thermally grown films was not significant in undoped films when compared to the case of 7.5 mol% YDZ.     

New understanding of the role of coincidence site lattice boundaries in abnormal grain growth of aluminium alloy

The sequential microstructure evolution of abnormal grain growth (AGG) in the aluminium alloy (AA5052) was investigated to analyse the migration behaviour of coincidence site lattice (CSL) boundaries, which are known to play an important role in inducing AGG. The sequential evolution showed that CSL boundaries tend to disappear more slowly than general boundaries at the growth front of abnormally growing grains. Especially, the migration rate of Σ9 boundaries was noticeably low, which is contrary to the previous suggestions.     

Misorientation characteristics of penetrating morphologies at the growth front of abnormally growing grains in aluminum alloy

The initial stage of abnormal grain growth of the aluminum alloy 5052 has been investigated using electron back-scattered diffraction to analyze the characteristic of misorientations of the penetrating morphology at the growth front. Among the 84 penetrating morphologies examined, none of the penetrated grain boundaries has low angles or coincidence site lattice (CSL) relations, whereas 66 penetrating grain boundaries have low angles or CSL relations. These results strongly suggest that the penetrating morphologies should result from triple-junction wetting.     

Effect of initial status and growth in pseudoword reading on Spanish reading comprehension at the end of first grade

This study analyzes the effect of initial status and growth in Spanish pseudoword reading in kindergarten and first grade on reading comprehension in Spanish at the end of first grade. One hundred and sixty-eight Spanish-speaking English learners who were learning to read in Spanish and English in the United States participated in the study. Results of hierarchical linear modeling indicate that students grew, on average, by 95 letter-sounds in Spanish from the middle of kindergarten to the end of first grade. Structural equation modeling indicated that 53% of the variance in Spanish reading comprehension at the end of first grade was explained by Spanish initial status on pseudoword reading, Spanish kindergarten overall reading performance, and growth in Spanish pseudoword reading. Findings are important in a Response to Intervention approach where screening and progress monitoring of pseudoword reading helps educators determine the level of support beginning readers need to acquire the alphabetic principle, an important skill that contributes substantially to Spanish reading comprehension.     

The Effect of Type of Feedback in Multiple-Choice Testing on Long-Term Retention

We investigated how different types of feedback in multiple-choice testing influence long-term retention. Participants completed an initial multiple-choice test on general-knowledge questions. Then, they were randomly placed into one of the following four conditions: feedback displaying the original question and four alternative options including the correct answer (Feedback 1); feedback displaying the original question and the correct answer (Feedback 2); feedback displaying only the correct answer (Feedback 3); and no feedback (Control). On the final test two days later, participants in the feedback conditions showed improved retention—even participants who received Feedback 3 outperformed the control group, regardless of whether feedback followed correct or incorrect responses. There was no difference between the feedback conditions when feedback followed correct responses, but Feedback 1 was superior to Feedback 3 when feedback followed incorrect responses. The function of feedback in multiple-choice testing is to maintain correct responses and to correct erroneous responses.     

Interactions of persistent slip bands with a grain boundary on the common primary slip plane in a copper bicrystal

In this letter, the dislocation patterns on the common primary slip plane in a fatigued \[1-34]-\[182-7] copper bicrystal with a Sigma=19b grain boundary (GB) have been investigated using the electron channelling contrast technique in a scanning electron microscope. The results show that the two-phase dislocation structure, such as veins and persistent slip band (PSB) walls, embedded within veins, can be clearly seen on the common primary slip plane. In particular, the interactions of PSBs with the GB are clearly revealed. It is found that there are three kinds of interaction mode between the GB and the dislocations during cyclic deformation, and those are discussed. It is suggested that the dislocations carried by PSBs cannot transfer through the GB continuously even though the bicrystal has a common primary slip plane and its surface slip bands are continuous across the GB.     

Empirical and historical perspectives on the growth of Pentecostal-style churches in Malaysia,Singapore and Hong Kong

This article considers the growth of Pentecostal-style churches in Southeast Asia, and specifically in Hong Kong, Kuala Lumpur and Singapore. It outlines four reasons for the growth that occurred and then, using qualitative and quantitative data in a mixed mode, seeks to test the hypotheses it derives. It concludes that each of the hypotheses remains plausible but notes that contextual factors or major social disruptions undermine any deterministic account.     

Effect of deep cryogenic treatment on carbon segregation in Cr8Mo2SiV tool steel during tempering

Carbon segregation in Cr8Mo2SiV tool steel after common heat treatment (CHT) and deep cryogenic treatment (DCT) has been investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) extraction replica and three-dimensional atom probe (3DAP) tests. The XRD results show that most of the retained austenite transformed to martensite after DCT. The TEM results confirm the transformation of blocky retained austenite to twin martensite during DCT. The 3DAP results reveal the segregation of carbon atoms and the maximum carbon fraction in carbon-rich regions increases after DCT. The peak carbon concentration in carbon-rich regions of SDC99 steel after CHT and DCT are 8 at. % and 15 at. %, respectively. The segregated carbon atoms grew into nuclei for nanoscale carbides precipitation on subsequent tempering.     

Combined effect of strontium modifier and antimony refiner on texture and growth mode of eutectic phase in an Al-11Si-2Cu-0.8Zn-0.6Fe cast alloy

Results of electron back-scattered diffraction and transmission electron microscopy studies reveal that the orientation of aluminium in the eutectic phase is different from the surrounding aluminium dendrites and that twin spacing of eutectic silicon increased significantly due to the interaction between strontium and antimony. In addition, the formation of ternary Mg₂Sb₂Sr intermetallic compound that precedes the eutectic reaction was proposed to be responsible for interaction.