Sample size planning for the coefficient of variation from the accuracy in parameter estimation approach

The accuracy in parameter estimation approach to sample size planning is developed for the coefficient of variation, where the goal of the method is to obtain an accurate parameter estimate by achieving a sufficiently narrow confidence interval. The first method allows researchers to plan sample size so that the expected width of the confidence interval for the population coefficient of variation is sufficiently narrow. A modification allows a desired degree of assurance to be incorporated into the method, so that the obtained confidence interval will be sufficiently narrow with some specified probability (e.g., 85% assurance that the 95 confidence interval width will be no wider than to units). Tables of necessary sample size are provided for a variety of scenarios that may help researchers planning a study where the coefficient of variation is of interest plan an appropriate sample size in order to have a sufficiently narrow confidence interval, optionally with somespecified assurance of the confidence interval being sufficiently narrow. Freely available computer routines have been developed that allow researchers to easily implement all of the methods discussed in the article.     

Sample size planning for longitudinal models: accuracy in parameter estimation for polynomial change parameters

Longitudinal studies are necessary to examine individual change over time, with group status often being an important variable in explaining some individual differences in change. Although sample size planning for longitudinal studies has focused on statistical power, recent calls for effect sizes and their corresponding confidence intervals underscore the importance of obtaining sufficiently accurate estimates of group differences in change. We derived expressions that allow researchers to plan sample size to achieve the desired confidence interval width for group differences in change for orthogonal polynomial change parameters. The approaches developed provide the expected confidence interval width to be sufficiently narrow, with an extension that allows some specified degree of assurance (e.g., 99%) that the confidence interval will be sufficiently narrow. We make computer routines freely available, so that the methods developed can be used by researchers immediately.     

Accuracy in parameter estimation for targeted effects in structural equation modeling: sample size planning for narrow confidence intervals

In addition to evaluating a structural equation model (SEM) as a whole, often the model parameters are of interest and confidence intervals for those parameters are formed. Given a model with a good overall fit, it is entirely possible for the targeted effects of interest to have very wide confidence intervals, thus giving little information about the magnitude of the population targeted effects. With the goal of obtaining sufficiently narrow confidence intervals for the model parameters of interest, sample size planning methods for SEM are developed from the accuracy in parameter estimation approach. One method plans for the sample size so that the expected confidence interval width is sufficiently narrow. An extended procedure ensures that the obtained confidence interval will be no wider than desired, with some specified degree of assurance. A Monte Carlo simulation study was conducted that verified the effectiveness of the procedures in realistic situations. The methods developed have been implemented in the MBESS package in R so that they can be easily applied by researchers.     

Sample size planning for composite reliability coefficients: accuracy in parameter estimation via narrow confidence intervals

Composite measures play an important role in psychology and related disciplines. Composite measures almost always have error. Correspondingly, it is important to understand the reliability of the scores from any particular composite measure. However, the point estimates of the reliability of composite measures are fallible and thus all such point estimates should be accompanied by a confidence interval. When confidence intervals are wide, there is much uncertainty in the population value of the reliability coefficient. Given the importance of reporting confidence intervals for estimates of reliability, coupled with the undesirability of wide confidence intervals, we develop methods that allow researchers to plan sample size in order to obtain narrow confidence intervals for population reliability coefficients. We first discuss composite reliability coefficients and then provide a discussion on confidence interval formation for the corresponding population value. Using the accuracy in parameter estimation approach, we develop two methods to obtain accurate estimates of reliability by planning sample size. The first method provides a way to plan sample size so that the expected confidence interval width for the population reliability coefficient is sufficiently narrow. The second method ensures that the confidence interval width will be sufficiently narrow with some desired degree of assurance (e.g., 99% assurance that the 95% confidence interval for the population reliability coefficient will be less than W units wide). The effectiveness of our methods was verified with Monte Carlo simulation studies. We demonstrate how to easily implement the methods with easy-to-use and freely available software.     

Sample size for multiple regression: obtaining regression coefficients that are accurate, not simply significant

An approach to sample size planning for multiple regression is presented that emphasizes accuracy in parameter estimation (AIPE). The AIPE approach yields precise estimates of population parameters by providing necessary sample sizes in order for the likely widths of confidence intervals to be sufficiently narrow. One AIPE method yields a sample size such that the expected width of the confidence interval around the standardized population regression coefficient is equal to the width specified. An enhanced formulation ensures, with some stipulated probability, that the width of the confidence interval will be no larger than the width specified. Issues involving standardized regression coefficients and random predictors are discussed, as are the philosophical differences between AIPE and the power analytic approaches to sample size planning.     

Accuracy in parameter estimation for ANCOVA and ANOVA contrasts: sample size planning via narrow confidence intervals

Contrasts of means are often of interest because they describe the effect size among multiple treatments. High-quality inference of population effect sizes can be achieved through narrow confidence intervals (CIs). Given the close relation between CI width and sample size, we propose two methods to plan the sample size for an ANCOVA or ANOVA study, so that a sufficiently narrow CI for the population (standardized or unstandardized) contrast of interest will be obtained. The standard method plans the sample size so that the expected CI width is sufficiently small. Since CI width is a random variable, the expected width being sufficiently small does not guarantee that the width obtained in a particular study will be sufficiently small. An extended procedure ensures with some specified, high degree of assurance (e.g., 90% of the time) that the CI observed in a particular study will be sufficiently narrow. We also discuss the rationale and usefulness of two different ways to standardize an ANCOVA contrast, and compare three types of standardized contrast in the ANCOVA/ANOVA context. All of the methods we propose have been implemented in the freely available MBESS package in R so that they can be easily applied by researchers.     

Sample size planning for the standardized mean difference: accuracy in parameter estimation via narrow confidence intervals

Methods for planning sample size (SS) for the standardized mean difference so that a narrow confidence interval (CI) can be obtained via the accuracy in parameter estimation (AIPE) approach are developed. One method plans SS so that the expected width of the CI is sufficiently narrow. A modification adjusts the SS so that the obtained CI is no wider than desired with some specified degree of certainty (e.g., 99% certain the 95% CI will be no wider than omega). The rationale of the AIPE approach to SS planning is given, as is a discussion of the analytic approach to CI formation for the population standardized mean difference. Tables with values of necessary SS are provided. The freely available Methods for the Behavioral, Educational, and Social Sciences (K. Kelley, 2006a) R (R Development Core Team, 2006) software package easily implements the methods discussed.     

Sample size determination for confidence intervals of interaction effects in moderated multiple regression with continuous predictor and moderator variables

Moderated multiple regression (MMR) has been widely employed to analyze the interaction or moderating effects in behavior and related disciplines of social science. Much of the methodological literature in the context of MMR concerns statistical power and sample size calculations of hypothesis tests for detecting moderator variables. Notably, interval estimation is a distinct and more informative alternative to significance testing for inference purposes. To facilitate the practice of reporting confidence intervals in MMR analyses, the present article presents two approaches to sample size determinations for precise interval estimation of interaction effects between continuous moderator and predictor variables. One approach provides the necessary sample size so that the designated interval for the least squares estimator of moderating effects attains the specified coverage probability. The other gives the sample size required to ensure, with a given tolerance probability, that a confidence interval of moderating effects with a desired confidence coefficient will be within a specified range. Numerical examples and simulation results are presented to illustrate the usefulness and advantages of the proposed methods that account for the embedded randomness and distributional characteristic of the moderator and predictor variables.     

Confidence intervals for standardized linear contrasts of means

Most psychology journals now require authors to report a sample value of effect size along with hypothesis testing results. The sample effect size value can be misleading because it contains sampling error. Authors often incorrectly interpret the sample effect size as if it were the population effect size. A simple solution to this problem is to report a confidence interval for the population value of the effect size. Standardized linear contrasts of means are useful measures of effect size in a wide variety of research applications. New confidence intervals for standardized linear contrasts of means are developed and may be applied to between-subjects designs, within-subjects designs, or mixed designs. The proposed confidence interval methods are easy to compute, do not require equal population variances, and perform better than the currently available methods when the population variances are not equal.     

Confidence intervals and sample size calculations for the weighted eta-squared effect sizes in one-way heteroscedastic ANOVA

Effect size reporting and interpreting practices have been extensively recommended in academic journals when primary outcomes of all empirical studies have been analyzed. This article presents an alternative approach to constructing confidence intervals of the weighted eta-squared effect size within the context of one-way heteroscedastic ANOVA models. It is shown that the proposed interval procedure has advantages over an existing method in its theoretical justification, computational simplicity, and numerical performance. For design planning, the corresponding sample size procedures for precise interval estimation of the weighted eta-squared association measure are also delineated. Specifically, the developed formulas compute the necessary sample sizes with respect to the considerations of expected confidence interval width and tolerance probability of interval width within a designated value. Supplementary computer programs are provided to aid the implementation of the suggested techniques in practical applications of ANOVA designs when the assumption of homogeneous variances is not tenable.     

Methods for the Behavioral,Educational, and Social Sciences: An R package

Methods for the Behavioral, Educational, and Social Sciences (MBESS; Kelley, 2007b) is an open source package for R (R Development Core Team, 2007b), an open source statistical programming language and environment. MBESS implements methods that are not widely available elsewhere, yet are especially helpful for the idiosyncratic techniques used within the behavioral, educational, and social sciences. The major categories of functions are those that relate to confidence interval formation for noncentral t, F, and chi2 parameters, confidence intervals for standardized effect sizes (which require noncentral distributions), and sample size planning issues from the power analytic and accuracy in parameter estimation perspectives. In addition, MBESS contains collections of other functions that should be helpful to substantive researchers and methodologists. MBESS is a long-term project that will continue to be updated and expanded so that important methods can continue to be made available to researchers in the behavioral, educational, and social sciences.     

The impact of ignoring random features of predictor and moderator variables on sample size for precise interval estimation of interaction effects

The influence of the joint distribution of predictor and moderator variables on the identification of interactions has been well described, but the impact on sample size determinations has received rather limited attention within the framework of moderated multiple regression (MMR). This article investigates the deficiency in sample size determinations for precise interval estimation of interaction effects that can result from ignoring the stochastic nature of continuous predictor and moderator variables in MMR. The primary finding of our examinations is that failure to accommodate the distributional properties of regressors can lead to underestimation of the necessary sample size and distortion of the desired interval precision. In order to take account of the randomness of regressor variables, two general and effective procedures for computing sample size estimates are presented. Moreover, corresponding programs are provided to facilitate use of the suggested approaches. This exposition helps to correct drawbacks in the existing techniques and to advance the practice of reporting confidence intervals in MMR analyses.     

单维测验合成信度元分析

元分析是根据现有研究对感兴趣的主题得出比较准确和有代表性结论的一种重要方法,在心理、教育、管理、医学等社会科学研究中得到广泛应用。信度是衡量测验质量的重要指标,用合成信度能比较准确的估计测验信度。未见有文献提供合成信度元分析方法。本研究在比较对参数进行元分析的三种模型优劣的基础上,在变化系数模型下推出合成信度元分析点估计及区间估计的方法;以区间覆盖率为衡量指标,模拟研究表明本研究提出的合成信度元分析区间估计的方法得当;举例说明如何对单维测验的合成信度进行元分析。     

α系数的区间估计方法比较

多数情况下,α系数可以用来评价测验信度。诸多研究建议,在报告测验信度的时候应当包括其置信区间。通过蒙特卡洛模拟研究,比较了7种α系数区间估计方法,包括Fisher法、Bonett-02法、Bonett-10法、精确Koning-Franses法、渐近ID法、渐近Koning-Franses法和ADF法。结果发现Bonett-10法和精确Koning-Franses法较好,它们的结果相差很小。这两种方法都比较简单,只需要样本的α值、测验题数、被试人数及F临界值,通过简单的运算便可得到α系数的置信区间。     

Confidence intervals for the overall effect size in random-effects meta-analysis

One of the main objectives in meta-analysis is to estimate the overall effect size by calculating a confidence interval (CI). The usual procedure consists of assuming a standard normal distribution and a sampling variance defined as the inverse of the sum of the estimated weights of the effect sizes. But this procedure does not take into account the uncertainty due to the fact that the heterogeneity variance (tau2) and the within-study variances have to be estimated, leading to CIs that are too narrow with the consequence that the actual coverage probability is smaller than the nominal confidence level. In this article, the performances of 3 alternatives to the standard CI procedure are examined under a random-effects model and 8 different tau2 estimators to estimate the weights: the t distribution CI, the weighted variance CI (with an improved variance), and the quantile approximation method (recently proposed). The results of a Monte Carlo simulation showed that the weighted variance CI outperformed the other methods regardless of the tau2 estimator, the value of tau2, the number of studies, and the sample size.     

Point-biserial correlation: Interval estimation,hypothesis testing,meta-analysis,and sample size determination

The point-biserial correlation is a commonly used measure of effect size in two-group designs. New estimators of point-biserial correlation are derived from different forms of a standardized mean difference. Point-biserial correlations are defined for designs with either fixed or random group sample sizes and can accommodate unequal variances. Confidence intervals and standard errors for the point-biserial correlation estimators are derived from the sampling distributions for pooled-variance and separate-variance versions of a standardized mean difference. The proposed point-biserial confidence intervals can be used to conduct directional two-sided tests, equivalence tests, directional non-equivalence tests, and non-inferiority tests. A confidence interval for an average point-biserial correlation in meta-analysis applications performs substantially better than the currently used methods. Sample size formulas for estimating a point-biserial correlation with desired precision and testing a point-biserial correlation with desired power are proposed. R functions are provided that can be used to compute the proposed confidence intervals and sample size formulas.     

Constructing Confidence Intervals for Effect Size Measures of an Indirect Effect

Confidence intervals for an effect size can provide the information about the magnitude of an effect and its precision as well as the binary decision about the existence of an effect. In this study, the performances of five different methods for constructing confidence intervals for ratio effect size measures of an indirect effect were compared in terms of power, coverage rates, Type I error rates, and widths of confidence intervals. The five methods include the percentile bootstrap method, the bias-corrected and accelerated (BCa) bootstrap method, the delta method, the Fieller method, and the Monte Carlo method. The results were discussed with respect to the adequacy of the distributional assumptions and the nature of ratio quantity. The confidence intervals from the five methods showed similar results for samples of more than 500, whereas, for samples of less than 500, the confidence intervals were sufficiently narrow to convey the information about the population effect sizes only when the effect sizes of regression coefficients defining the indirect effect are large.     

Optimal sample sizes for precise interval estimation of Welch’s procedure under various allocation and cost considerations

Welch’s (Biometrika 29: 350–362, 1938) procedure has emerged as a robust alternative to the Student’s t test for comparing the means of two normal populations with unknown and possibly unequal variances. To facilitate the advocated statistical practice of confidence intervals and further improve the potential applicability of Welch’s procedure, in the present article, we consider exact approaches to optimize sample size determinations for precise interval estimation of the difference between two means under various allocation and cost considerations. The desired precision of a confidence interval is assessed with respect to the control of expected half-width, and to the assurance probability of interval half-width within a designated value. Furthermore, the design schemes in terms of participant allocation and cost constraints include (a) giving the ratio of group sizes, (b) specifying one sample size, (c) attaining maximum precision performance for a fixed cost, and (d) meeting a specified precision level for the least cost. The proposed methods provide useful alternatives to the conventional sample size procedures. Also, the developed programs expand the degree of generality for the existing statistical software packages and can be accessed at brm.psychonomic-journals.org/content/ supplemental.     

认知诊断属性分类一致性信度区间估计三种方法

摘要：引入了三种可以估计认知诊断属性分类一致性信度置信区间的方法：Bootstrap法、平行测验法和平行测验配对法。用模拟研究验证和比较了这三种方法的表现,结果发现,平行测验法和Bootstrap法在被试量比较少、题目数量比较少的情况下,估计的标准误和置信区间较接近,但是随着被试量的增加,Bootstrap法的估计精度提高较快,在被试量大和题目数量较多时基本接近平行测验配对法的结果。Bootstrap法的所需时间最少,平行测验配对法计算过程复杂且用时较长,推荐用Bootstrap法估计认知诊断属性分类一致性信度的置信区间。     

Sample size determinations for the two rater kappa statistic

This paper gives a method for determining a sample size that will achieve a prespecified bound on confidence interval width for the interrater agreement measure,. The same results can be used when a prespecified power is desired for testing hypotheses about the value of kappa. An example from the literature is used to illustrate the methods proposed here.