Note on the computation of biserial correlations in item analysis

A rapid method is described for machine computation of biserial correlations in item analysis with several criteria. This method has been found to yield biserial correlations from punched IBM cards at the rate of about 41 per hour.     

Correction of item-total correlations in item analysis

The biserial correlation between an item and the total test of which the item is a part tends to be misleadingly high when used in item analysis, since the item is included in the total test. Two formulas with correction for this overlap are derived and compared with Zubin's and Guilford's formulas. One of the new coefficients is invariant to test length.     

A note on the computation of biserialr in item validation

A method of computing biserial coefficients of correlation through the use of punch card tabulating equipment is presented. Each item is assigned a separate column and successes are punched 1. By arranging the cards on the criterion variable and obtaining progressive sums on several columns simultaneously, it is possible to obtain data for several correlations in one run of the cards through the machine.     

Note on use of extreme criterion groups in item discrimination analysis

The purpose of this note is to reconsider the Kelley-Cureton definition of optimal extreme groups for estimating item-criterion correlations. Optimal tail per cents are derived, using the criterion of minimum sampling variance of the tetrachoric correlation coefficient, and the findings are related to earlier work of Mosteller. It is shown that upper and lower 27 per cent groups yield the most precise estimate of the tetrachoric coefficient only when the population correlation is close to zero. When the population value is .4, extreme 20 per cent groups provide estimates with the smallest sampling error variance. It is further shown, however, that 27 per cent extremes yield highly efficient estimates. Thus no change is recommended in traditional item analysis procedures.     

Note on the computation of product-moment correlation coefficients

This paper describes a systematic plan for computing all of the product-moment correlation coefficients among a number of variables that has been taught by Professor Toops for many years. It offers several advantages over a scheme presented by Kossack in a recent issue of this journal.     

The relation between factor loadings and biserial correlations in item analysis

The first centroid factor loadings obtained from various interitem relations are compared with item discrimination indices commonly used in item analysis. Depending upon what type of matrix is factored, the factor loadings are shown to be related to point biserial and biserial correlations.     

Note on the computation of the inverse of a triangular matrix

A simplified method of computing the inverse of a triangular matrix is presented. It is useful with the multiple-group method of factoring the correlation matrix as well as with other factor-analysis and multiple-correlation problems.     

Note on construction of an item analysis table for the high-low-27-per-cent group method

This paper describes the construction of a new item analysis table for the high-low-27-per-cent group method. The table provides a ready means of translating the observed proportions of success in the two extreme groups (p _H ,p _L ) into measures of item difficulty and item discrimination (p, Δ, andr). The tabled values of both the difficulty index,p, and the discrimination index,r, have been derived from Karl Pearson's tables of the normal bivariate surface.     

An evaluation of forced-choice and true-false item formats in personality assessment

The reliabilities and validities of true-false and forced-choice formats in personality assessment were compared. Subjects from college residential units were assigned randomly to groups receiving the Personality Research Form (PRF) in either forced-choice or standard true-false form. Reliabilities were substantially higher for the true-false form. Peer rating validities for each format were in a comparable range, but correlations with self-ratings were higher for the true-false form. Results do not support the contention that a forced-choice format is consistently more valid than a standard format. Subjects well acquainted with ratees manifested more highly differentiated judgments, showed consistently higher validity, but were more prone to show a bias to attribute more salient traits, like dominance and exhibition, to ratees.     

An item response model with internal restrictions on item difficulty

An IRT model based on the Rasch model is proposed for composite tasks, that is, tasks that are decomposed into subtasks of different kinds. There is one subtask for each component that is discerned in the composite tasks. A component is a generic kind of subtask of which the subtasks resulting from the decomposition are specific instantiations with respect to the particular composite tasks under study. The proposed model constrains the difficulties of the composite tasks to be linear combinations of the difficulties of the corresponding subtask items, which are estimated together with the weights used in the linear combinations, one weight for each kind of subtask. Although the model does not belong to the exponential family, its parameters can be estimated using conditional maximum likelihood estimation. The approach is demonstrated with an application to spelling tasks. We thank Eric Maris for his helpful comments.     

基于项目区分度的双目标CD-CAT选题策略

针对双目标CD-CAT,将六种项目区分度（鉴别力D、一般区分度GDI、优势比OR、2PL的区分度a、属性区分度ADI、认知诊断区分度CDI）分别与IPA方法结合,得到新的选题策略。模拟研究比较了它们的表现,还考察了区分度分层在控制项目曝光的表现。结果发现：新方法都能明显提高知识状态的判准率和能力估计精度;分层选题均能很好地提高题库利用率。总体上,OR加权能显著提高测量精度;OR分层选题在保证测量精度条件下显著提高项目曝光均匀性。     

A Monte Carlo evaluation of tests for comparing dependent correlations

The authors conducted a Monte Carlo simulation of 8 statistical tests for comparing dependent zero-order correlations. In particular, they evaluated the Type I error rates and power of a number of test statistics for sample sizes (Ns) of 20, 50, 100, and 300 under 3 different population distributions (normal, uniform, and exponential). For the Type I error rate analyses, the authors evaluated 3 different magnitudes of the predictor-criterion correlations (rho(y,x1) = rho(y,x2) = .1, .4, and .7). For the power analyses, they examined 3 different effect sizes or magnitudes of discrepancy between rho(y,x1) and rho(y,x2) (values of .1, .3, and .6). They conducted all of the simulations at 3 different levels of predictor intercorrelation (rho(x1,x2) = .1, .3, and .6). The results indicated that both Type I error rate and power depend not only on sample size and population distribution, but also on (a) the predictor intercorrelation and (b) the effect size (for power) or the magnitude of the predictor-criterion correlations (for Type I error rate). When the authors considered Type I error rate and power simultaneously, the findings suggested that O. J. Dunn and V. A. Clark's (1969) z and E. J. Williams's (1959) t have the best overall statistical properties. The findings extend and refine previous simulation research and as such, should have greater utility for applied researchers.     

Specifying optimum examinees for item parameter estimation in item response theory

Information functions are used to find the optimum ability levels and maximum contributions to information for estimating item parameters in three commonly used logistic item response models. For the three and two parameter logistic models, examinees who contribute maximally to the estimation of item difficulty contribute little to the estimation of item discrimination. This suggests that in applications that depend heavily upon the veracity of individual item parameter estimates (e.g. adaptive testing or text construction), better item calibration results may be obtained (for fixed sample sizes) from examinee calibration samples in which ability is widely dispersed.This work was supported by Contract No. N00014-83-C-0457, project designation NR 150-520, from Cognitive Science Program, Cognitive and Neural Sciences Division, Office of Naval Research and Educational Testing Service through the Program Research Planning Council. Reproduction in whole or in part is permitted for any purpose of the United States Government. The author wishes to acknowledge the invaluable assistance of Maxine B. Kingston in carrying out this study, and to thank Charles Lewis for his many insightful comments on earlier drafts of this paper.     

Spoken-word processing in aphasia: effects of item overlap and item repetition

Two studies were carried out to investigate the effects of presentation of primes showing partial (word-initial) or full overlap on processing of spoken target words. The first study investigated whether time compression would interfere with lexical processing so as to elicit aphasic-like performance in non-brain-damaged subjects. The second study was designed to compare effects of item overlap and item repetition in aphasic patients of different diagnostic types. Time compression did not interfere with lexical deactivation for the non-brain-damaged subjects. Furthermore, all aphasic patients showed immediate inhibition of co-activated candidates. These combined results show that deactivation is a fast process. Repetition effects, however, seem to arise only at the longer term in aphasic patients. Importantly, poor performance on diagnostic verbal STM tasks was shown to be related to lexical decision performance in both overlap and repetition conditions, which suggests a common underlying deficit.     

Solving the measurement invariance anchor item problem in item response theory

The efficacy of tests of differential item functioning (measurement invariance) has been well established. It is clear that when properly implemented, these tests can successfully identify differentially functioning (DF) items when they exist. However, an assumption of these analyses is that the metric for different groups is linked using anchor items that are invariant. In practice, however, it is impossible to be certain which items are DF and which are invariant. This problem of anchor items, or referent indicators, has long plagued invariance research, and a multitude of suggested approaches have been put forth. Unfortunately, the relative efficacy of these approaches has not been tested. This study compares 11 variations on 5 qualitatively different approaches from recent literature for selecting optimal anchor items. A large-scale simulation study indicates that for nearly all conditions, an easily implemented 2-stage procedure recently put forth by Lopez Rivas, Stark, and Chernyshenko (2009) provided optimal power while maintaining nominal Type I error. With this approach, appropriate anchor items can be easily and quickly located, resulting in more efficacious invariance tests. Recommendations for invariance testing are illustrated using a pedagogical example of employee responses to an organizational culture measure. (PsycINFO Database Record (c) 2012 APA, all rights reserved).     

The unique correspondence of the item response function and item category response functions in polytomously scored item response models

The item response function (IRF) for a polytomously scored item is defined as a weighted sum of the item category response functions (ICRF, the probability of getting a particular score for a randomly sampled examinee of ability ). This paper establishes the correspondence between an IRF and a unique set of ICRFs for two of the most commonly used polytomous IRT models (the partial credit models and the graded response model). Specifically, a proof of the following assertion is provided for these models: If two items have the same IRF, then they must have the same number of categories; moreover, they must consist of the same ICRFs. As a corollary, for the Rasch dichotomous model, if two tests have the same test characteristic function (TCF), then they must have the same number of items. Moreover, for each item in one of the tests, an item in the other test with an identical IRF must exist. Theoretical as well as practical implications of these results are discussed.This research was supported by Educational Testing Service Allocation Projects No. 79409 and No. 79413. The authors wish to thank John Donoghue, Ming-Mei Wang, Rebecca Zwick, and Zhiliang Ying for their useful comments and discussions. The authors also wish to thank three anonymous reviewers for their comments.