A low-cost computer-controlled function generator suitable for generating visual grating displays

This paper reports a simple low-cost computer peripheral for generation of gratings. Its advantages are minimal CPU operations, reliability, and variety of programmable output functions.     

A computer-controlled cardiotachometer

A versatile display system for presenting heart rate information is described. The display has a table with 10 rows and 50 columns. This 10 by 50 matrix contains all integers from 0 to 499, so that it can display the instantaneous R-R intervals of a rat’s EKG to the nearest millisecond. At each beat 1 of 10 vertically and 1 of 50 horizontally arranged indicator lights are turned on to provide the coordinates for reading the table. Either beat-to-beat or averaged heart rate or period is displayed. Small and large changes can be easily and accurately observed on the same scale. The lights are controlled by a PDP-8/e. A listing of the assembler program is presented.     

Exaggerating temporal differences enhances recognition of individuals from point light displays

Humans are very good at perceiving each other's movements. In this article, we investigate the role of time-based information in the recognition of individuals from point light biological motion sequences. We report an experiment in which we used an exaggeration technique that changes temporal properties while keeping spatial information constant; differences in the durations of motion segments are exaggerated relative to average values. Participants first learned to recognize six individuals on the basis of a simple, unexaggerated arm movement. Subsequently, they recognized positively exaggerated versions of those movements better than the originals. Absolute duration did not appear to be the critical cue. The results show that time-based cues are used for the recognition of movements and that exaggerating temporal differences improves performance. The results suggest that exaggeration may reflect general principles of how diagnostic information is encoded for recognition in different domains.     

Painless computer-controlled experimentation

More Es might employ computers to control psychological experiments if computer languages suitable for experimental control were easier to learn. In fact, course author languages intended for writing instructional sequences offer many facilities desirable for experimental control. A particular language, CAN-4, is examined for its suitability, and its use in a concept learning experiment is illustrated.     

A computer-controlled vapor-dilution olfactometer

A computer-controlled olfactometer with several innovations leading to closer control over the stimulus parameters and minimization of nonolfactory cues is presented. A microcomputer is used to control the stimulus duration and interstimulus interval. Electronic mass flow con-trollers are employed to maintain close control over the flow in the pure air line and the stimulus-bearing line. Both humidity and temperature are closely regulated. Using a nasal catheter, this stimulus delivery system coupled with velopharyngeal closure and oral breathing permits accurate specification of the quantity of stimulus material actually entering a subject’s nares. The design is such that the computer programming, patch panel interface, and threaded tubing allow versatility in the type of olfactometric study that can be conducted. This system is amenable for threshold, electrophysiological, and sensory adaptation studies of olfaction.     

An automated identification system for use with computer-controlled tasks

Monkeys of various species can use a joystick to perform a variety of computer-generated tasks. The purpose of this paper is to describe an automated system that determines which subject in a social group has completed a task. The system is based on a microchip that is easily injected into the forearm. The present paper demonstrates the technique with 1 animal that had a different chip in each arm.     

A flexible computer-controlled perception laboratory

Research in perception is often guided or limited by the capabilities of the laboratory. A computer-controlled perception laboratory is described that was designed to be extremely flexible at a modest cost. The laboratory permits control of onset time, offset time, and intensity of visual, auditory, and tactile stimuli. The visual stimuli include single points, text, stereoscopic displays, and two-dimensional representations of three-dimensional objects moving in space. The design of the hardware and software and the criteria that guided our choice of this design are discussed. Finally, potential applications of this laboratory are considered.     

A two-dimensional computer-controlled visual stimulator

A computer-controlled instrument that creates complex two-dimensional patterns on a CRT monitor is described. These patterns are used to elicit visual evoked responses. Patterns are produced on a raster that is rotatable about its center. It is possible to assign to arbitrary regions in the raster any of four independent one-dimensional spatial-temporal functions. For each spatial-temporal function, the experimenter can select an arbitrary spatial profile, the spatial frequency of the profile, the starting phase of the profile, the temporal function, and the depth of modulation.     

An eight-channel computer-controlled scanning electromyograph

A measurement system is described for the computerized detection, digitizing, and storage of electromyographic (EMG) signals from up to eight muscle groups. The use of a channel scanning technique allows almost simultaneous multichannel recording with minimal circuit redundancy. Specifically, the scanning electromyograph allows several EMG preamplifiers to share expensive isolation, signal-conditioning, and interface circuitry. The design incorporates monolithic integrated circuit preamplifiers and includes optical isolation of the preamplifier circuitry for protection of the subject. Hybrid active filter modules allow convenient selection of system bandpass characteristics. Key measurement parameters are software programmable. The scanning electromyograph is inexpensively constructed from readily available componentry. Specifications for all functional blocks within the instrument are comparable to those of commercial instrumentation.     

Metric and nonmetric plotting models

A problem with standard printer scatterplot routines is that points are not adequately labeled. Four methods of generating printer plots are presented. All four methods allow multi-character point labels, and three of the methods can guarantee that no portion of the labels are hidden. This is accomplished by using varying amounts of metric and nonmetric distance information to locate the points.The author wishes to thank Warren Sarle and Forrest Young who provided many valuable suggestions during the development of PROC IDPLOT.The methods and procedure described in this paper were developed by the author at the University of North Carolina as a part of a software development project funded by SAS Institute Inc.     

A simple inexpensive computer-controlled tone generator

A simple circuit for a keyed tone generator is described. The total construction cost is less than $5. Various adaptations and modifications of the circuit are discussed.     

On timing events in computer-controlled experiments

This paper considers the problem of timing events in computer-controlled experiments. A digital clock is defined as a time-mark generator or “ticker” and a counter. A discussion of time-mark generators commonly used in computers is followed by a consideration of several ways in which computer clocks are implemented and used. A framework for the latter discussion is provided by a classification of clocks in terms of whether the ticker or the counter (either or both) is internal or external to the computer.     

Seven types of data from computer-controlled experiments

Seven types of data often need to be accessed from a computer-controlled experiment. Some of them involve only a single word and must be available within a fraction of a second; others may involve hundreds of thousands of words, but need not be available until a few hours after an experimental session. A time-sharing program for on-line control of psychological experiments should have the facilities for dealing with all seven types of data.     

A computer-controlled system for training and testing primates

The hardware and software for a computer-controlled training and testing system for primates are described. The computer (DDP-116 in the Computer-Controlled Psychology Laboratory at Carnegie-Mellon University) controls all stimulus presentation, reinforcement, and records data in a form ready for analysis on a larger computer.     

A computer-controlled laboratory for studying infant event perception

An integrated software package for testing infants in a habituation procedure is described. The software is written for an Apple II computer with a minimum of 64K of memory. Additional interface cards are required for timing responses and displaying dynamic stimuli. The software is divided into four independent modules: (1) Configure Experiment allows the experimenter to design a specific experiment. (2) Run Experiment controls the running of a previously configured habituation experiment. (3) Calculate Reliability allows a second observer to score the subject for the purpose of computing reliability. (4) Data Summary and Formatting provides a summary of the results and allows the user to flexibly format the data for reading by various statistical packages.     

FOCLAB: A language for computer-controlled psychology research

The FOCLAB system, a dialect of FOCAL, provides complete real-time experiment control and data acquisition capabilities in the area of experimental psychology. The language provides digital and analog input/output, graphics (including alphanumerics) on a refresh CRT, and a powerful set of time measurement operations. With these facilities FOCAL may be used in cognitive and operant, as well as psychophysiological research. FOCLAB will operate with either PDP-8 or PDP-12 systems, and can control most of the currently existing lab interface options for these computers. The system will operate on 8K core-only machines, as well as under OS/8.