Nanoindentation creep behavior of grain boundary in pure magnesium

Nanoindentation creep tests were performed at the grain boundary and grain interior in pure magnesium. The grain boundary showed a high strain rate sensitivity exponent and was dominated by grain boundary sliding due to the high diffusion rate at the grain boundary. The grain boundary affected the deformation behavior of the area at a distance of 2 µm into the grain interior. On the other hand, the grain interior had a low strain rate sensitivity exponent, because its matrix was too large to be influenced by the grain boundary. The deformation mechanism in the grain interior was determined to be dislocation slip.     

3D shape and orientation of nanoscale Pb inclusions at grain boundaries in Al observed by TEM and STEM tomography

We have combined high-angle annular dark field/scanning transmission electron microscopy (HAADF-STEM) tomography with bright field (BF)-TEM tomography to characterize small inclusions of Pb at a grain boundary in Al. It was found that the shape of the grain boundary inclusions is more complex than previously thought. By using moiré fringes observed at some orientations of the specimen in a BF-TEM tomographic tilt series, we were able to determine the orientation of each grain, the axis and angle of misorientation of the grain boundary, and the facet planes of the grain boundary inclusions. The 3D shape of the inclusions was determined by merging this information with the HAADF-STEM tomography.     

Anisotropic grain growth kinetics in nanocrystalline nickel

ABSTRACT

Intriguing properties exhibited by nanocrystalline metals, including a high level of mechanical strength, arise from their nanometer-scale grain sizes. It is critical to determine the evolution of grain size of nanocrystalline materials at elevated temperature, as this process can drastically change the mechanical properties. In this work, a nanocrystalline Ni foil with grain size ～ 25?nm was annealed in situ in an X-ray diffractometer. X-ray diffraction peaks were analysed to determine the grain growth kinetics. The grain growth exponents obtained were ～ 2–4 depending upon the crystallographic direction, indicating the anisotropic nature of the grain growth kinetics.     

Nanocrystallization effect on the surface electron work function of copper and its corrosion behaviour

The effect of grain size at micro- and nanoscale on the surface electron stability of copper as reflected by the electron work function (EWF) was investigated. In the ambient environment, the surface reactivity increases with decreasing grain size in the micron range, but decreases when entering the nanometre range. When in a solution with associated passivation, grain refinement enhances resistance to corrosion. However, the situation is reversed when no passivation is involved. In the former case, the improved surface stability and corrosion behaviour caused by nanocrystallization can be attributed to the formation of a more protective passive film. In the latter case, nanocrystallization accelerates material dissolution resulting from enhanced activity of surface electrons at high-density grain boundaries. The correlation between EWF and the corrosion behaviour, as well as the mechanisms involved, are discussed.     

Detrimental effect of cellular precipitation on the creep strength of Inconel740H

Cellular precipitation (also known as discontinuous precipitation) has been observed at the grain boundaries of a newly developed nickel-based Inconel740H alloy designed for use at 700?°C in advanced ultrasupercritical coal-fired power plants. By means of element mapping and selected area diffraction, the cellular precipitates were identified as Cr-rich M₂₃C₆ carbides. The onset of cellular precipitation was found to follow a pucker mechanism in Inconel740H. The cellular precipitates at the grain boundaries, even at low volume fractions, were severely detrimental to the creep strength at 750?°C. The creep rupture life of Inconel740H containing cellular precipitates at grain boundaries was only one-tenth of that for the alloy without cellular precipitates. The reason for the drastically decreased creep rupture life is attributed to the poor resistance of cellular precipitates to crack propagation during creep.     

Stress-enhanced grain growth in a nanostructured aluminium alloy during spark plasma sintering

In this study, we report on the influence of high pressure on the microstructure evolution of cryomilled nanostructured Al alloy powders during spark plasma sintering (SPS). Our experimental results suggest that the particular mechanism that governs grain growth during SPS depends on the magnitude of the applied pressure. In the case of material consolidated at a high pressure (e.g. 500 MPa), grain coarsening occurs via a combination of thermally activated grain boundary (GB) migration, stress-coupled GB migration and grain rotation-induced grain coalescence. In contrast, in the case of the material consolidated at a low pressure (50 MPa), grain growth occurs primarily via thermally activated GB migration.     

Reinforcer value may change within experimental sessions

Large and systematic changes in response rates often occur within sessions during operant conditioning procedures. In the present experiment, we asked whether the value of the reinforcer that supports responding also changes within sessions. Pigeons pecked a key for mixed grain available throughout the session. Occasionally, wheat was also provided for pecking a second key. The ratio of the rates of responding for mixed grain and wheat, a frequently used measure of relative reinforcer value, changed significantly within sessions when mixed grain was provided at high, but not at low, rates. Habituation to the reinforcer provides the most likely explanation for these changes in reinforcer value. Eventually, habituation may provide a unified explanation for the within-session changes in behavior that occur when many species of subjects respond on a wide variety of tasks.     

The role of preliminary magazine training in acquisition of the autoshaped key peck

A series of experiments tested the hypothesis that initial key pecks in the autoshaping procedure are generalized pecks at the illuminated grain hopper. Experiment I found that autoshaping readily occurred when the chamber was continuously illuminated by a house-light. In Experiment II, pigeons given magazine training and autoshaping with an unlighted grain hopper failed to autoshape in 200 trials. Acquisition of autoshaped key pecking was retarded in Experiment III when stimulus control by the magazine light was reduced. In the fourth study, pigeons were given magazine training with either a red or white magazine light and then given autoshaping with concurrently presented red and white keys. For all pigeons in this experiment, the first key peck occurred on the key of the same color as that pigeon's magazine light. The results of these experiments were interpreted as supporting an account of autoshaping that identifies initial key pecks as arising due to generalization of pecking at the lighted grain hopper to pecking at the lighted key.     

Effects of cementite morphology on short-fatigue-crack propagation in binary Fe–C steel

The effects of cementite morphology on short-fatigue-crack propagation were investigated by subjecting smooth steel specimens to rotating-bending fatigue tests. Intergranular and transgranular cementite precipitation steels free of other phases were prepared through heat treatments. In the intergranular cementite precipitation steel, short-fatigue-crack propagation was decelerated at the grain boundaries, and accelerated in the grain interiors. In contrast, the transgranular precipitation steel showed the deceleration of the crack propagation in the grain interiors but not in the vicinity of the grain boundaries.     

Superelastic behavior of ultrafine-grain-structured Ti-35 wt%Nb alloy fabricated by equal-channel angular extrusion

The superelasticity of a Ti-35?wt%Nb alloy has been explored by fabricating an ultrafine-grain-structured specimen through equal-channel-angular-extrusion processing. A complete superelasticity of 3.5% was realized by refining the grain size down to about 0.25?µm and by inducing the precipitation of an ω-phase. The superelasticity was possible because the β-phase was largely stabilized at room temperature as a result of the severe grain refinement and Nb-enrichment in the matrix on account of the ω-precipitation.     

Accumulation of geometrically necessary dislocations near grain boundaries in deformed copper

Cross-correlation-based analysis of electron backscatter diffraction patterns has been used to map the distribution of geometrically necessary dislocation (GND) density in deformed polycrystalline copper. Patterning of the dislocations into high-density cell walls and low-density cell interiors was readily observed at the micron scale. Patterning at the longer length scale of the grain size was also evident with high-density regions (GND hot spots) tending to be in clusters, often found close to some but not all grain boundaries and triple junctions.     

Graded differential reinforcement: Response-dependent reinforcer amount

After key pecking had been autoshaped, six pigeons were exposed to a condition in which the duration of grain availability at the end of an 8-second trial depended on the number of responses emitted during the trial (0.25-second access to grain per response). This procedure, called correlated reinforcement, alternated across conditions with the automaintenance baseline in which the 8-second trial terminated with a constant 2.5-second access to grain. Two control procedures were run; in both, the reinforcer durations were yoked to those obtained in the last correlated session. In the yoked control no responses were required, but in the single-response yoked control at least one response was required to receive the yoked duration. The correlated condition maintained response rates above those produced by the two control conditions. These results may be accounted for by differential reinforcement.     

Study of ferroelectric nanodomains and the effect of grain size in BaTiO3 ceramics

Nanodomains and grain-size effects in BaTiO₃ have been studied theoretically. In this article, we have calculated the long-range Coulomb interaction between ferroelectric nanodomains in a single BaTiO₃ grain, and obtained information on the domain structure at various temperatures and grain sizes. The relation between transition temperature and the grain size is obtained by incorporating the domain-wall energy, the surface energy, and the stress energy into the Landau–Ginzburg free-energy density. The results show that 180° domains exist in ferroelectric BaTiO₃ nanoceramics. At room temperature, with the decreasing grain size, the domain width does not decrease monotonically; when the grain size reduces to 18?nm, the grain becomes a single domain, and when less than 12?nm, the ferroelectric phase disappears. With the decreasing grain size the temperature of the cubic-tetragonal phase transition is reduced, while the temperatures of the tetragonal–orthorhombic and orthorhombic–rhombohedral phase transitions reach a maximum when the grain sizes are in the vicinity of 200?nm. The theoretical results are compared with experimental data.     

Stimulus generalization from feeder to response key in the acquisition of autoshaped pecking

During autoshaping, a 6-second presentation of one stimulus and a variable time 30-second presentation of a second stimulus alternated in appearance on a pigeon key. Grain always was delivered for 3 seconds at the end of the first stimulus interval. In the first experiment, autoshaped pecking of the stimulus preceding grain delivery began much sooner when that stimulus was a black vertical line on a white background and the other stimulus was green than when the opposite stimulus arrangement was used. Because these two stimuli differed in form, hue, brightness, and similarity in hue and brightness to the illumination of the raised feeder, three subsequent experiments examined whether the differential speed of autoshaping in the two groups was due to a feature-positive, feature-negative effect, a preference for brighter over darker stimuli, a simple preference for white over green, or stimulus generalization from the brightness or hue of the illuminated, raised feeder to the stimulus on the key preceding grain delivery. The data from these experiments showed that the first autoshaped key peck was most likely to be made to the stimulus of the same hue as that illuminating the feeder, regardless of whether that stimulus was positively or negatively associated with grain delivery. At least under some conditions, therefore, stimulus-generalization mediated response transfer of pecking grain in the presence of the hue illuminating the feeder to pecking the key illuminated by a similar hue appears to account for the occurrence of autoshaped key pecking.     

In the beginning was the rhyme? A reflection on Hulme,Hatcher, Nation,Brown, Adams,and Stuart (2002)

Phonological sensitivity at different grain sizes is a good predictor of reading acquisition in all languages. However, prior to any explicit tuition in alphabetic knowledge, phonological sensitivity develops at the larger grain sizes-syllables, onsets, and rimes-in all languages so far studied. There are also developmental differences in the grain size of lexical representations and reading strategies across orthographies. Phoneme-level skills develop fastest in children acquiring orthographically consistent languages with a simple syllabic (CV) structure, such as Finnish and Italian. For English, however, both "large" and "small" units are important for the successful acquisition of literacy.     

Production of recrystallized nano-grains in a fine-grained Cu–Zn alloy

A fine-grained Cu–30%Zn alloy sheet was rolled at 77 K to induce ultrafine mechanical twins. Subsequent annealing of the rolled alloy at temperatures up to 543 K led to the uniform appearance of recrystallized ultrafine grains (UFGs), which contained numerous annealing twins. Average grain sizes of 150 ～ 300 nm were produced in this way. The formation of such UFGs during annealing is attributed to the high nucleus density associated with the fine initial grain size as well as to the high densities of mechanical twins and dislocations produced by cryorolling. The high driving force for recrystallization enabled the use of relatively low annealing temperatures, which limited the subsequent grain growth.     

Key pecking in pigeons produced by pairing keylight with inaccessible grain

In Experiment I, keylight was paired with inaccessible grain delivery (under two conditions of keylight intensity) to determine if autoshaping would occur in the absence of primary reinforcement. In Experiment II, the procedure was repeated with accessible grain, for comparison. In Experiment III, the procedures were repeated with explicitly unpaired presentations of keylight and either inaccessible or accessible grain. The results indicated that key pecking occurred as quickly in the presence of keylight pairings with inaccessible grain as with accessible grain, though (except for one bird) key pecking was not maintained with inaccessible grain. Furthermore, compared to the dim keylight, the bright keylight greatly suppressed key pecking when paired with inaccessible grain, and reduced the rate of key pecking when paired with accessible grain. Little key pecking occurred in groups exposed to explicitly unpaired presentations of keylight (whether bright or dim) and grain (whether accessible or inaccessible). When the birds in Experiment III were retested with explicitly paired presentations of keylight and grain, little key pecking was observed, suggesting suppressive effects of prior explicitly unpaired presentations. It is suggested that the effects of key-brightness manipulation were produced by the association of grain with cues other than the response key, or by distraction produced by partial illumination of the grain hopper.     

Modulation sensitivity in the perceptual organization of speech

In a spoken utterance, a talker expresses linguistic constituents in serial order. A listener resolves these linguistic properties in the rapidly fading auditory sample. Classic measures agree that auditory integration occurs at a fine temporal grain. In contrast, recent studies have proposed that sensory integration of speech occurs at a coarser grain, approximate to the syllable, on the basis of indirect and relatively insensitive perceptual measures. Evidence from cognitive neuroscience and behavioral primatology has also been adduced to support the claim of sensory integration at the pace of syllables. In the present investigation, we used direct performance measures of integration, applying an acoustic technique to isolate the contribution of short-term acoustic properties to the assay of modulation sensitivity. In corroborating the classic finding of a fine temporal grain of integration, these functional measures can inform theory and speculation in accounts of speech perception.     

Enhanced grain growth in yttria-doped zirconia thin film structures synthesized under photon irradiation

Enhanced grain growth in ultra-thin yttria-doped zirconia (YDZ) films synthesized under ultraviolet (UV) irradiation is reported. The mean grain size in UV-synthesized 7.5 mol% YDZ films nearly 56 nm thick increased to 85 nm upon annealing in an oxygen-rich ambient at 900°C for 1 h, while in thermally grown YDZ they grew only to ～15 nm under identical annealing conditions. In situ electron microscopy kinetic studies reveal an enhanced kinetic constant and self-limiting grain growth behaviour in the UV-synthesized oxide films. The difference between UV and thermally grown films was not significant in undoped films when compared to the case of 7.5 mol% YDZ.     

Deformation twinning of Bi–Sb solid alloy formed under a strong gravitational field

We performed an ultracentrifuge experiment on Bi–Sb alloy. Deformation twins with misorientations of about 90° were observed in the low-gravitational region where grain refinement had not occurred. The twins were thicker than the conventional deformation twins and their thickness was proportional to the gravitational field. We found that the minimum gravitational field required for grain refinement was 0.17 × 10⁶ G at 240°C for periods <10 h.