A software system for the collection of retrospective protocols prompted by eye fixations

A software system is capable of recording eye position, reducing these data to a sequence of eye fixations, and immediately replaying this fixation sequence superimposed over the original stimulus. The replay can be controlled by the subject to produce various speeds, to pause, or to back up to earlier fixations. The purpose of the replay software is to enable the eye fixations to prompt a retrospective verbal protocol. Such a prompted protocol should reduce the forgetting and fabrication problems that are often associated with retrospective protocols. In a preliminary experimental test, the prompted protocol method yielded longer protocols and contained more words than those generated by either the concurrent or retrospective protocol methods.     

A rotating buffer system for on-line collection of eye monitor data

Eye movement research often requires the rapid collection and handling of large amounts of data. Such collection would be impossible without the laboratory computer. This paper describes an eye movement data collection system developed for the DEC PDP-11/03 computer. The two central features of the system are a rotating buffer, which saves eye movement data in memory, and direct memory access routines for writing the data to disk. The paper also describes a procedure for testing this or any data collection system, provided the data sampling rate is known. The system presented here is sufficiently general that with slight modifications, it could be used for collecting a wide range of physiological responses, including evoked potentials.     

The Observer: A software system for collection and analysis of observational data

The Observer is a general-purpose software package for event recording and data analysis in behavioral research. It allows any IBM-type personal computer to serve as an event recorder. In addition, The Observer can generate dedicated event-recording programs for several types of non-IBM-compatible portable and hand-held computers and transfer files between the PC and such computers. The user specifies options through menus. The configuration can be either used directly for event recording on the PC or passed on to a program generator that creates a program to collect data on a hand-held computer. Observational data from either type of computer can be analyzed by the program. Event-recording configurations can be tailored to many different experimental designs. Keys can be designated as events, and modifiers can be used to indicate the limits of an event. The program allows grouping of events in classes and distinction between mutually exclusive versus nonexclusive events and duration events versus frequency events. Timing of events is accurate to 0.1 sec. An on-line electronic notepad permits notes to be made during an observation session. The program also includes on-line error correction. User comments as well as independent variables can be stored together with the observational data. During data analysis, the user can select the level of analysis and the type of output file. The Observer calculates frequency of occurrence and duration for classes of events, individual events, or combinations of events. For analysis of concurrence, one can select the number of nesting levels and the order of nesting. Output can be generated in the form of sorted event sequence files, text report files, and tabular ASCII files. The results can be exported to spreadsheet and statistical programs.     

Personal problem-solving system for scoring TAT responses: preliminary validity and reliability data

Personal problem solving has emerged as an important construct in the cognitive-behavioral literature, yet there is a lack of clinically useful, performance-based measures practitioners can use to assess the personal problem-solving skills of their clients. Two studies evaluated the validity and reliability of a scoring system for measuring personal problem-solving processes via the Thematic Apperception Test (TAT; Morgan & Murray, 1935). In Experiment 1, undergraduate students (N = 87) completed two measures of personal problem solving, as well as three TAT cards, which were scored using the Personal Problem-Solving System (PPSS; Renan, 1990). In Experiment 2, an additional group of undergraduates (N = 56) responded to three TAT cards on two separate occasions and also completed a different measure of personal problem solving. Results from both studies supported the use of the PPSS for scoring TAT responses to assess personal problem-solving processes. Suggestions for future research are highlighted.     

A satellite system for controlling real-time experiments

In this paper, we describe a computer system for controlling real-time psychology experiments. We begin by considering the kinds of experiments that are performed in our laboratory and examining the hardware and software requirements of these experiments. We then review various systems along a continuum ranging from general-purpose timesharing systems to stand-alone dedicated processors. The capabilities of these systems are described in comparison with our requirements. The features of the PARASITE-FS system are then described. This host-satellite system includes a local file system and monitor program, real-time device drivers with flexible interrupt processing capabilities, user-level routines for controlling the real-time devices, and a package for controlling the timing of experimental events.     

A hierarchical LSI-11 system for real-time control,interevent time storage,and data analysis

A general-purpose laboratory computer system using two Digital Equipment Corporation LSI-11 s in a master-slave relationship is described. The implementation includes hardware to install an LSI-11 as a slave parallel processor, to provide special-purpose functions such as a real-time clock and a 4K FIFO interprocessor buffer, and to establish a bus that permits the use of inexpensive interfaces to experimental equipment. The slave processor generates a complete log of each input or output event. Data in the form of the time of each event are continuously passed through the FIFO to a foreground task in the main LSI-11, which in turn stores the raw data on a hard disk. A macro library allows the easy development of experimentcontrol programs. A library of FORTRAN routines provides a pointer-based conditional and iterative search facility that can sift out any specifiable event or set of events from the data records for subsequent analysis. This computer system provides the user with an inexpensive facility to run up to 32 simultaneous experiments with complete data logging in foreground while program development, analysis, and word processing are concurrently being done in background.     

A simple LSI-11 system for real-time control,interevent time storage,and data analysis

A simple laboratory computer system based on a Digital Equipment Corporation LSI-11, floppy disk, DRV11 parallel input-output board, and the RT-11 operating system is described. Interface to experimental devices is provided through a lab-built relay driver and relay closure sensing interface. An extensive high-level software package provides an easy-to-use control language (e.g., stimuli can be controlled with a simple “TURN ON” or “TURN OFF” instruction) and easy-to-use FORTRAN subroutines for data exploration (e.g., “IFIND” searches a data file for a particular event). The control software automatically generates, codes, and stores a complete log of every input and output event and its time of occurrence in each of five simultaneously running experiments. This provides the capability to reanalyze data in light of hypotheses not available when the experiment was designed. The FORTRAN subroutine library for data exploration provides a conditional and iterative search facility to sift out events or sets of events from the data file for analysis. Standard FORTRAN statements perform arithmetic operations on the resulting data.     

A real-time control system for CAI and prothesis

An integrated hardware and software system was used for the real-time control of text display in a CAI environment. Reliability and cost considerations led to the development of a digital EOG transducer, which was used in conjunction with a KIM-1 microcomputer. This paper traces the development of that system from a complex and expensive PDP-11-based system to a microcomputer firmware approach. Such a system could, in real time, accomplish a similar display task for severely handicapped nonvocal individuals.     

Falling for smartphones: A smartphone-centric data collection tool for measuring distracted walking

Falls and severe head injuries have been increasingly associated with the use of smartphones while walking. A growing body of academic research identifies cognitive, perceptual, and motor deficits caused by smartphone use while walking. Despite the dangers associated with smartphone use while walking, the true prevalence can be challenging to assess. To better address the growing injury risk related to smartphone-induced distraction, we have built a smartphone-based data collection tool to assess smartphone use frequency while walking. In the current study, 35 participants installed the data collection app on their Android smartphones. On average, the application collected 520 data points per day. The application also indicated participants walked 12% of their day, and 49% of their time walking included smartphone use. The current study demonstrates the prevalence of smartphone-induced distraction while walking and smartphone applications' potential efficacy to collect behavioral data.     

A software system for real-time control of psychological experiments

This paper describes an all-purpose experimental system, “APES,” for use in a microprocessor-controlled behavioral pharmacology laboratory. APES is an assembly language program that can run on any of the DEC PDP-11 family processors under an RT-11 single-job operating system. Its main purpose is the real-time control of psychological experimentation. The capabilities of the system are: (1) system generation of all operant or Pavlovian conditioning paradigms, (2) collection and storage of both behavioral and physiological data in a machine-readable format for later statistical analysis, and (3) operation that can be accomplished by individuals who have no computer programming experience.     

基于过程数据的问题解决能力测量及数据分析方法

问题解决能力是指在没有明显解决方法的情况下个体从事认知加工以理解和解决问题情境的能力。对问题解决能力的测量需要借助相对更复杂、更真实、具有可交互性的问题情境来诱导问题解决行为的呈现。使用虚拟测评抓取问题解决的过程数据并分析其中所蕴含的潜在信息是当前心理计量学中测量问题解决能力的新趋势。首先, 回顾问题解决能力测量方式的发展：从纸笔测验到虚拟测评。然后, 总结对比两类过程数据的分析方法：统计建模法和数据挖掘法。最后, 从非认知因素的影响、多模态数据的利用、问题解决能力发展的测量、其他高阶思维能力的测量和问题解决能力概念及结构的界定五个方面展望未来可能的研究方向。     

Online data collection for psychotherapy process research.

A preliminary investigation addressed the feasibility of using a specially designed online database to collect psychotherapy session impact and therapist-client alliance data and compared these online measures to published results of their paper-and-pencil counterparts. Participants drawn from a psychology department clinic, a student counseling center, and community agencies visited an online site to report on each of their sessions. Some clients and therapists visited the online database on a regular basis; however, client recruitment and participation was problematic. Equivalence between the online and paper-and-pencil forms was supported, with minor qualifications, by comparable distributions of participant responses on the measures' scales. More direct contact with clients might increase their participation.     

A real-time satellite system based on UNIX

One solution to the difficulty of running real-time applications under UNIX is to develop the application programs on an available UNIX system and execute them on a dedicated satellite processor. This combines the advantages of a powerful timesharing operating system with the real-time capabilities of a single-process system. PARASITE, a real-time satellite system, provides tools for developing the application program on the host and executing it on a satellite. A host utility serves to invoke the standard UNIX C compiler and link its output with the PARASITE library. The PARASITE library consists of routines that mimic the standard library and routines that read and write the real-time peripherals. PARASITE currently supports digital inputs and outputs, asynchronous serial-line interfaces, program-mable real-time clocks, and analog-to-digital and digital-to-analog converters. Another PARA-SITE utility downloads the object code of the user program and PARASITE support code into the satellite, where it runs independently. Once the application routine is executing on the satellite, it controls the satellite processor at all times and is continuously available for servicing hardware-generated interrupts. When a real-time peripheral interrupt routine is invoked by a hardware interrupt, it sends a software signal to the user program, in addition to processing the interrupt. This allows the user program to perform additional tasks that are specific to the application. All data to be permanently stored must be transferred to the host. Since the satellite has no direct access to the resources of the host, a process running on the host receives the data and manages files. PARASITE provides packet driver routines on both the host and the satellite, which together handle the data transmission protocol.     

A system for automatically analyzing and correcting real-time experiment control programs

A system is described that automatically analyzes the time constraints in a real-time experiment control program and automatically makes corrections to that program to provide any degree of temporal accuracy desired by the experimenter within the capabilities of the hardware. A generalized procedure is presented to allow similar systems to be developed for most common languages and hardware platforms.