Digital speech recording and playback system using a multiprocessor architecture

This paper describes a digital speech recording system capable of digitizing, storing, and playing back speech signals of arbitrary duration. The maximum duration for continuous speech processing is limited only by disk storage capacity. The system is based on a multiprocessor architecture, with a main processor responsible for file processing and outboard processor I/O control. As implemented, the main processor is a DEC LSI-11/23 microcomputer with 1 MB of main memory and a large-capacity Winchester disk. The outboard processor is an Intel 8085 with 2K local memory for speech buffering. Digitization is accomplished using logarithmic PCM at 8-kHz sampling frequency. Interprocessor communication is achieved with a 16-bit parallel data bus, and the necessary electrical connections and handshaking signals are discussed in detail. The local software modules are described, with attention given to timing and communications protocol considerations.     

A brief scoring method for voice stress analysis

The Psychological Stress Evaluator (PSE) detects inaudible frequency changes in the human voice, and it is claimed that the pattern of these changes can provide a measure of psychophysiological arousal. A few studies have given some support to this hypothesis, but further clarifica tion is needed. One major technical problem in this research is that the traditional scoring esyStem is unreliable unless considerable numbers of scores are taken and averaged , The paper presents a conveniently brief scoring system which has fair reliahility, and which correlates significantly with a measure of Critical Flicker Fusion Threshold.     

CASPER: A personal computer package for exploring psychometrics

CASPER is a psychometrics software package suitable for instructional and research applications with IBM-PC-compatible computers. CASPER lets the user simulate or directly enter psychometric data. Numerous statistical analyses, file handling procedures, and graphics are included Analyses include factor analysis, multiple regression, correlation/partial correlation, moments analysis, reliability analysis, and item analysis.     

Turbo Pascal timing routines for the IBM microcomputer family

Two Turbo Pascal (versions 3.0 and 4.0) software timers for the IBM microcomputer family are described: one with a 55-msec resolution and another with a 1-msec resolution. Both can be implemented without additional hardware requirements. The 55-msec timer makes use of the system-time-of-day clock; the 1-msec timer is a Turbo Pascal translation of the timer described by Bührer, Sparrer, and Weitkunat (1987). The logic of each timer is shown by a short demonstration program.     

Joint DEC and microprocessor users’ groups report

The results of a joint meeting of users of Digital Equipment Corporation (DEC) computers and various microprocessors are reported. The meeting included a review and a discussion of Unix and of recent hardware and software products from DEC.     

Simulation of motor-neuronal networks

This research develops a theoretical connectionist-type model of the operation of the human motor system. The model includes the operation of the cerebral cortex, pons, spinal cord, and muscles. It emphasizes the parallel passage of neuronal signals, the integration of multiple signals within nuclei, and the modulation of signals as a result of sensory input. A redundant Fast Fourier Transform (FFT) procedure that analyzes EEG signals by a method similar to the one used by pontine nuclei is described.     

The challenge of rationality in computer access for the visually impaired

Problems encountered by the visually impaired in accessing computers are discussed from a blind Apple user’s point of view. Difficulties arising from hardware, software, and inadequacies of documentation are considered. Particular attention is paid to access limitations involving paperless Braille and synthetic speech output. Avenues of solution for the problems are suggested. The main remedies proposed are increasing standardization of software design and interfacing requirements, along with greater producer-consumer consultation.     

A microcomputer interface for decoding telemetry data and displaying them numerically and graphically in real time

A microcomputer (IBM-PC) interface for decoding ultrasonic telemetry pulse-modulated signals from either unisensor or multisensor (time-multiplexed) transmitters is described. Pulse intervals, recorded by the interface, and corresponding independently measured parameter levels (i.e., swimming directions, speeds, depths, water temperature, and ambient irradiance levels) are entered into a calibration file. The IBM-PC uses this file to convert the signal’s pulse intervals to sensor states and displays these in real time. States of up to eight multiplexed sensors can be displayed concurrently in either numerical or graphical format (as histograms) with low resolution (16 axis divisions) or, for a particular sensor, with high resolution (70 axis divisions). The circuit components mount on the IBM Prototype Card (with foil for interfacing logic) allowing easy installation in the IBM-PC’s expansion slot. The 35K of controlling software is written in Pascal with four subroutines in assembly language.     

Managing data entry of a large-scale interview project with optical scanning hardware and software

A hardware and software system for the cost-effective preparation of interview data is described. Scantron optical scanning hardware and DataBlocks software were used to prepare ASCII data files from structured interviews and questionnaires. These data were then edited for analysis with SPSS-X Data Entry software. Three different processes for preparing interview data were compared. Time, personnel, hardware, and software costs were projected for each process, as well as comparative risks to the integrity of data. A scanning procedure saves time and money, and it reduces the risk of errors.     

Affecting speed and accuracy in perception

An account of affective modulations in perceptual speed and accuracy (ASAP: Affecting Speed and Accuracy in Perception) is proposed and tested. This account assumes an emotion-induced inhibitory interaction between parallel channels in the visual system that modulates the onset latencies and response durations of visual signals. By trading off speed and accuracy between channels, this mechanism achieves (a) fast visuo-motor responding to course-grained information, and (b) accurate visuo-attentional selection of fine-grained information. ASAP gives a functional account of previously counterintuitive findings, and may be useful for explaining affective influences in both featural-level single-stimulus tasks and object-level multistimulus tasks.     

A microcomputer-based tracking task for examination of the spatial and temporal organization of perceptual motor skill

A microcomputer-based tracking task is described in detail. The program that controls this task was written in Pascal and 6502 assembler language and was designed to run on an Apple IIe computer. The program was designed to allow the experimenter to vary such parameters as the velocity of the stimulus signal. In addition, several indicants of performance are recorded simultaneously and are averaged over selected time intervals during each trial. The paper also illustrates the applications of this particular computer program in the study of motor control and learning.     

Invalid results from the method of constant stimuli

The Method of Constant Stimuli was shown to produce constant errors in the direction expected by E. In an experiment, 89 Ss compared variable lines with a standard, each S producing a psychometric function and Point of Subjective Equality (PSE). Four groups differed in the particular range of variable stimuli used; whether the stimuli averaged longer or shorter than the standard, and whether they had a wide or narrow range. All sets of variable stimuli encompassed the standard. PSE was consistently between the standard and the mean of the variables, as predicted by Adaptation Level Theory. In many experiments, the set of variables is chosen on the basis of theory or pilot studies; the present study shows that PSE will be spuriously drawn toward the center of the variables, hence toward E’s pre-experimental expectations.     

Effect of simultaneous auditory stimulation on vibrotactile thresholds

Vibrotactile thresholds were determined at 250 and 400 Hz in the presence of (1) the sounds emitted by the vibrator, (2) continuous tonal or narrow-band masking noise, or (3) a pulsed tone synchronized with the vibrator signal. The measure of a cross-modality effect was the threshold shift occurring between each condition and the control condition, in which earmuff silencers eliminated the vibrator sounds. Continuous tones or noise had no effect upon vibrotactile thresholds. However, auditory signals synchronized with the vibrator signals did significantly elevate vibrotactile thresholds.     

Beauty is in the ease of the beholding: A neurophysiological test of the averageness theory of facial attractiveness

Hundreds of studies have shown that people prefer attractive over unattractive faces. But what is an attractive face, and why is it preferred? Averageness theory claims that faces are perceived as being attractive when their facial configuration approximates the mathematical average facial configuration of the population. Conversely, faces that deviate from this average configuration are perceived as being unattractive. The theory predicts that both attractive and mathematically averaged faces should be processed more fluently than unattractive faces, whereas the averaged faces should be processed marginally more fluently than the attractive faces. We compared neurocognitive and behavioral responses to attractive, unattractive, and averaged human faces to test these predictions. We recorded event-related potentials (ERPs) and reaction times (RTs) from 48 adults while they discriminated between human and chimpanzee faces. The participants categorized averaged and high-attractive faces as being “human” faster than low-attractive faces. The posterior N170 (150–225 ms) face-evoked ERP component was smaller in response to high-attractive and averaged faces than to low-attractive faces. Single-trial electroencephalographic analysis indicated that this reduced ERP response arose from the engagement of fewer neural resources, and not from a change in the temporal consistency of how those resources were engaged. These findings provide novel evidence that faces are perceived as being attractive when they approximate a facial configuration close to the population average, and they suggest that processing fluency underlies preferences for attractive faces.     

A real-time multiuser foreground,single-user background system for the PDP-9 computer

We have developed a software system for a PDP-9, with fixed head disk, to allow up to 16 remote laboratories to use the central PDP-9 facility for their experimental data acquisition and control needs. Timesharing is performed on a “demand” basis, using the hardware automatic priority-interrupt option. The real-time acquisition and control aspects are separated from the data reduction in the foreground by using a batch process foreground mainstream. The background is used primarily as a systems device for program updates and communications with a CDC terminal connected to a CDC 6600 computer. The philosophy, both software and hardware, developed for this heterogeneous user environment will be discussed.     

Generalizing the Apple-Psych system

Each upgrade of computer hardware usually requires the development of new programming systems for psychological experimentation. Developing new software means learning a new system and unlearning an old one. To minimize this problem, a set of subroutine calls, derived from the Apple Psych system, can be implemented with different dialects of Pascal on different microcomputers.     

Screen control and timing routines for the IBM microcomputer family using a high-level language

Procedures are described for the IBM PC/AT and compatibles that measure an event’s duration with millisecond accuracy and that synchronize stimulus presentation with the vertical-retrace signal. The software is written in Turbo Pascal (Versions 2.0, 3.0, and 4.0; Borland International, Inc., 1984, 1985, 1987). Difficulties reflecting differences among video controller cards are also presented.     

What is Apple-Psych?

Apple Psych, a system of software subroutines written in Apple Pascal and 6502 assembly language, was designed to run real-time psychological experiments on the Apple II, II+, and IIe microcomputers. This paper describes the minimum system requirements necessary to run Apple-Psych, the capabilities of the basic system, and the advantages and disadvantages of using Apple-Psych. Because the utility of a system to a researcher is often linked to its flexibility and expandability, this paper includes a brief discussion of hardware expansions already supported by the Apple Psych software and hardware expansions that would require additional software support.     

The MED-PC experimental apparatus programming system

MED-PC is a software system that implements the MEDSTATE NOTATION dialect of state notation on IBM PC and compatible computers equipped with MED Associates interfacing. It provides a programming environment in which users can write short programs in a specialized language to control and record the events of operant and classical conditioning experiments. As many as eight experimental stations, each with up to 8 inputs and 32 outputs, running the same or different experimental procedures, may be active simultaneously. The system provides a standard set of run-time features, including mechanisms for displaying real-time data, simulation of responses, manipulation of array and variable contents, and writing of disk files. The system is based upon polling techniques, and is implemented as a translator that generates Pascal units, which are then linked to previously compiled Pascal routines.