高阶项目反应模型的发展与应用

在测量具有层阶结构的潜质时, 标准项目反应模型对项目参数估计和能力参数估计都具有较低的效率, 多维项目反应模型虽然在估计第一阶潜质时具有高效性, 但没有考虑到潜质层阶的情况, 所以它不适合用来处理具有层阶结构的潜质; 而高阶项目反应模型在处理这种具有层阶结构的潜质时, 不仅能够高效准确地对项目参数和能力参数进行估计, 而且还能同时获得高阶潜质与低阶潜质。目前存在的高阶项目反应模型有高阶DINA模型、高阶双参数正态肩型层阶模型、高阶逻辑斯蒂模型、多级评分的高阶项目反应模型和高阶题组模型。未来对高阶项目反应模型的研究方向应注意多水平高阶项目反应模型、项目内多维情况下的高阶项目反应模型以及高阶认知诊断模型。     

多维项目反应理论等级反应模型

基于因子分析和单维项目反应理论的多维项目反应理论是测量理论的新发展方向之一。但是, 多维项目反应理论仍处于不成熟的发展阶段, 多数研究也只是以二级评分为主。本文首先介绍了逻辑斯蒂形式的多维等级反应模型, 并以二维等级反应模型为例, 分析了模型的数学函数图像及其性质。然后, 推导出了多维等级反应模型的项目信息函数, 并结合实例进行了讨论。进一步地, 本文阐述了使用联合极大似然估计和马尔科夫链蒙特卡洛方法估计多维等级反应模型参数的思想。最后, 指出了一些有待研究的问题。     

题组反应理论及其在中学英语考试中的应用研究

题组作为众多测验中的一种常见题型,由于项目间存在一定程度的依赖性而违背了局部独立性假设,若用项目反应模型进行参数估计将会出现较大的偏差.题组反应理论将被试与题组的交互作用纳入到模型中,解决了项目间相依性的问题.笔者对题组反应理论的发展、基本原理及其相关研究进行了综述,并将其应用在中学英语考试中.与项目反应理论相对比,结果发现：（1）题组反应模型与项目反应模型在各参数估计值的相关系数较强,尤其是能力参数和难度参数;（2）在置信区间宽度的比较上,题组反应模型在各个参数上均窄于项目反应模型,即题组反应模型的估计精度优于项目反应模型.     

多水平项目反应理论模型在测验发展中的应用

作者简要介绍了多水平项目反应模型,对多水平项目反应理论与通常项目反应理论之间的关系进行了探讨,得到了多水平项目反应模型参数与通常项目反应模型参数之间的关系,并讨论了多水平项目反应模型的推广模型。通过一个实际例子,用多水平项目反应模型对测验中项目的特征进行分析;检验个体水平和组水平预测变量对能力参数的影响;对项目功能差异进行分析。最后文章就多水平项目反应理论模型的优势与不足进行了讨论     

IRT中最小化χ2/EM参数估计方法

对IRT的双参数Logistic模型（2PLM）中未知参数估计问题,给出了一个新的估计方法――最小化χ2/EM估计。新方法在充分考虑项目反应理论(IRT)与经典测量理论(CTT)之间的差异的前提下,从统计计算的角度改进了Berkson的最小化χ2估计,取消了Berkson实施最小化χ2估计时需要已知能力参数的不合实际的前提,扩大了应用范围。实验结果表明新方法能力参数的估计结果与BILOG相比,精确度要高,且当样本容量超过2000时,项目参数的估计结果也优于BILOG。实验还表明新方法稳健性好     

单维参数型与非参数型项目反应理论项目参数的比较研究

单维参数型与非参数型项目反应理论模型使用不同的项目参数描写项目的测量特性,前者使用难度、区分度、猜测度等参数,后者使用量表适宜性系数。研究探讨了难度分布、区分度分布、被试群体的能力分布三个因素与量表适宜性系数间的关系,这三因素分别有3、4、3个水平。实验采用蒙特卡洛方法,模拟了36种条件下拟合双参数逻辑斯蒂克模型的项目反应数据,结果表明这三个因素交互影响着Hi系数和H系数。     

基于联结主义的连续记分IRT模型的项目参数和被试能力估计

运用联结主义中的级连相关模型对于小样本条件下的连续记分项目反应理论 (IRT)模型的项目参数和被试能力进行了估计。一组被试对于一组项目的反应矩阵作为级连相关模型的输入 ,这组被试的能力θ或该组项目的参数a、b和c作为该模型的输出 ,对神经网络进行训练使之具备了估计θ,a ,b或c的能力。计算机模拟的实验表明 ,如果测验中有少量项目取自于题库 ,就可以运用联结主义方法对IRT参数和被试能力进行较好的估计     

在GLMM框架下统一GT与IRT

本文首次提出使用广义线性混合模型(Generalized Linear Mixed Model, GLMM)对概化理论(GT)和项目反应理论(IRT)进行统合,即在一次统计中就能同时获得GT和IRT所需要的估计结果。模拟研究结果显示：相比于传统的GT方差分量估计方法——期望均值平方(Expected Mean Squares, EMS),GLMM可以获得更准确的方差分量、G系数和Φ系数,而且GLMM获得的题目难度参数估计精度优于传统Rasch模型。实证研究展示GLMM在实际心理测量数据分析中的应用。     

测验理论的新发展:多维项目反应理论

多维项目反应理论是基于因子分析和单维项目反应理论两大背景下发展起来的一种新型测验理论。根据被试在完成一项任务时多种能力之间是如何相互作用的,多维项目反应模型可以分为补偿性模型和非补偿性模型两类。本文在系统介绍了当前普遍使用的补偿性模型的基础上,指出后续研究者应关注多维项目反应理论中多级评分和高维空间的多维模型、补偿性和非补偿性模型的融合、参数估计程序的开发和多维测验等值四个方面的研究。     

等级反应模型项目特征曲线法等值研究

主、客观题并用的测验建项目反应理论题库需作多级模型项目参数等值,本研究推演了等级反应模型下项目特征曲线等值方法并在实际等值试验中获得成功.     

Bayesian estimation of a multilevel IRT model using gibbs sampling

In this article, a two-level regression model is imposed on the ability parameters in an item response theory (IRT) model. The advantage of using latent rather than observed scores as dependent variables of a multilevel model is that it offers the possibility of separating the influence of item difficulty and ability level and modeling response variation and measurement error. Another advantage is that, contrary to observed scores, latent scores are test-independent, which offers the possibility of using results from different tests in one analysis where the parameters of the IRT model and the multilevel model can be concurrently estimated. The two-parameter normal ogive model is used for the IRT measurement model. It will be shown that the parameters of the two-parameter normal ogive model and the multilevel model can be estimated in a Bayesian framework using Gibbs sampling. Examples using simulated and real data are given.     

Simple imputation methods versus direct likelihood analysis for missing item scores in multilevel educational data

Missing data, such as item responses in multilevel data, are ubiquitous in educational research settings. Researchers in the item response theory (IRT) context have shown that ignoring such missing data can create problems in the estimation of the IRT model parameters. Consequently, several imputation methods for dealing with missing item data have been proposed and shown to be effective when applied with traditional IRT models. Additionally, a nonimputation direct likelihood analysis has been shown to be an effective tool for handling missing observations in clustered data settings. This study investigates the performance of six simple imputation methods, which have been found to be useful in other IRT contexts, versus a direct likelihood analysis, in multilevel data from educational settings. Multilevel item response data were simulated on the basis of two empirical data sets, and some of the item scores were deleted, such that they were missing either completely at random or simply at random. An explanatory IRT model was used for modeling the complete, incomplete, and imputed data sets. We showed that direct likelihood analysis of the incomplete data sets produced unbiased parameter estimates that were comparable to those from a complete data analysis. Multiple-imputation approaches of the two-way mean and corrected item mean substitution methods displayed varying degrees of effectiveness in imputing data that in turn could produce unbiased parameter estimates. The simple random imputation, adjusted random imputation, item means substitution, and regression imputation methods seemed to be less effective in imputing missing item scores in multilevel data settings.     

Stochastic EM for estimating the parameters of a multilevel IRT model

An item response theory (IRT) model is used as a measurement error model for the dependent variable of a multilevel model. The dependent variable is latent but can be measured indirectly by using tests or questionnaires. The advantage of using latent scores as dependent variables of a multilevel model is that it offers the possibility of modelling response variation and measurement error and separating the influence of item difficulty and ability level. The two‐parameter normal ogive model is used for the IRT model. It is shown that the stochastic EM algorithm can be used to estimate the parameters which are close to the maximum likelihood estimates. This algorithm is easily implemented. The estimation procedure will be compared to an implementation of the Gibbs sampler in a Bayesian framework. Examples using real data are given.     

Sequential sampling designs for the two-parameter item response theory model

In optimal design research, designs are optimized with respect to some statistical criterion under a certain model for the data. The ideas from optimal design research have spread into various fields of research, and recently have been adopted in test theory and applied to item response theory (IRT) models. In this paper a generalized variance criterion is used for sequential sampling in the two-parameter IRT model. Some general principles are offered to enable a researcher to select the best sampling design for the efficient estimation of item parameters.     

混合IRT潜在模型及其应用轨迹

项目反应理论是测量被试潜在特质的现代测量理论, 潜在类别分析是基于模型的潜在特质分类技术。混合项目反应理论将项目反应理论与潜在类别分析相结合, 能够同时对被试分类并量化其潜在特质。在阐述混合项目反应理论概念、原理的基础上, 介绍了MRM、mNRM和mPCM等几种常见混合模型及其参数估计方法, 并从心理与行为特征分类、项目功能差异检测、测验效度评价等方面评述了其在心理测验中的应用发展轨迹。     

Specifying Ability Growth Models Using a Multidimensional Item Response Model for Repeated Measures Categorical Ordinal Item Response Data

When categorical ordinal item response data are collected over multiple timepoints from a repeated measures design, an item response theory (IRT) modeling approach whose unit of analysis is an item response is suitable. This study proposes a few longitudinal IRT models and illustrates how a popular compensatory multidimensional IRT model can be utilized to formulate such longitudinal IRT models, which permits an investigation of ability growth at both individual and population levels. The equivalence of an existing multidimensional IRT model and those longitudinal IRT models is also elaborated so that one can make use of an existing multidimensional IRT model to implement the longitudinal IRT models.     

Cognitive psychology meets psychometric theory: on the relation between process models for decision making and latent variable models for individual differences

This article analyzes latent variable models from a cognitive psychology perspective. We start by discussing work by Tuerlinckx and De Boeck (2005), who proved that a diffusion model for 2-choice response processes entails a 2-parameter logistic item response theory (IRT) model for individual differences in the response data. Following this line of reasoning, we discuss the appropriateness of IRT for measuring abilities and bipolar traits, such as pro versus contra attitudes. Surprisingly, if a diffusion model underlies the response processes, IRT models are appropriate for bipolar traits but not for ability tests. A reconsideration of the concept of ability that is appropriate for such situations leads to a new item response model for accuracy and speed based on the idea that ability has a natural zero point. The model implies fundamentally new ways to think about guessing, response speed, and person fit in IRT. We discuss the relation between this model and existing models as well as implications for psychology and psychometrics.     

A Note on the Reliability Coefficients for Item Response Model-Based Ability Estimates

Assuming item parameters on a test are known constants, the reliability coefficient for item response theory (IRT) ability estimates is defined for a population of examinees in two different ways: as (a) the product-moment correlation between ability estimates on two parallel forms of a test and (b) the squared correlation between the true abilities and estimates. Due to the bias of IRT ability estimates, the parallel-forms reliability coefficient is not generally equal to the squared-correlation reliability coefficient. It is shown algebraically that the parallel-forms reliability coefficient is expected to be greater than the squared-correlation reliability coefficient, but the difference would be negligible in a practical sense.