Alternative Approaches to Addressing Non-Normal Distributions in the Application of IRT Models to Personality Measures

It is generally assumed that the latent trait is normally distributed in the population when estimating logistic item response theory (IRT) model parameters. This assumption requires that the latent trait be fully continuous and the population homogenous (i.e., not a mixture). When this normality assumption is violated, models are misspecified, and item and person parameter estimates are inaccurate. When normality cannot be assumed, it might be appropriate to consider alternative modeling approaches: (a) a zero-inflated mixture, (b) a log-logistic, (c) a Ramsay curve, or (d) a heteroskedastic-skew model. The first 2 models were developed to address modeling problems associated with so-called quasi-continuous or unipolar constructs, which apply only to a subset of the population, or are meaningful at one end of the continuum only. The second 2 models were developed to address non-normal latent trait distributions and violations of homogeneity of error variance, respectively. To introduce these alternative IRT models and illustrate their strengths and weaknesses, we performed real data application comparing results to those from a graded response model. We review both statistical and theoretical challenges in applying these models and choosing among them. Future applications of these and other alternative models (e.g., unfolding, diffusion) are needed to advance understanding about model choice in particular situations.     

Robust Measurement via A Fused Latent and Graphical Item Response Theory Model

Item response theory (IRT) plays an important role in psychological and educational measurement. Unlike the classical testing theory, IRT models aggregate the item level information, yielding more accurate measurements. Most IRT models assume local independence, an assumption not likely to be satisfied in practice, especially when the number of items is large. Results in the literature and simulation studies in this paper reveal that misspecifying the local independence assumption may result in inaccurate measurements and differential item functioning. To provide more robust measurements, we propose an integrated approach by adding a graphical component to a multidimensional IRT model that can offset the effect of unknown local dependence. The new model contains a confirmatory latent variable component, which measures the targeted latent traits, and a graphical component, which captures the local dependence. An efficient proximal algorithm is proposed for the parameter estimation and structure learning of the local dependence. This approach can substantially improve the measurement, given no prior information on the local dependence structure. The model can be applied to measure both a unidimensional latent trait and multidimensional latent traits.     

高阶项目反应模型的发展与应用

在测量具有层阶结构的潜质时, 标准项目反应模型对项目参数估计和能力参数估计都具有较低的效率, 多维项目反应模型虽然在估计第一阶潜质时具有高效性, 但没有考虑到潜质层阶的情况, 所以它不适合用来处理具有层阶结构的潜质; 而高阶项目反应模型在处理这种具有层阶结构的潜质时, 不仅能够高效准确地对项目参数和能力参数进行估计, 而且还能同时获得高阶潜质与低阶潜质。目前存在的高阶项目反应模型有高阶DINA模型、高阶双参数正态肩型层阶模型、高阶逻辑斯蒂模型、多级评分的高阶项目反应模型和高阶题组模型。未来对高阶项目反应模型的研究方向应注意多水平高阶项目反应模型、项目内多维情况下的高阶项目反应模型以及高阶认知诊断模型。     

A general Bayesian multilevel multidimensional IRT model for locally dependent data

Many item response theory (IRT) models take a multidimensional perspective to deal with sources that induce local item dependence (LID), with these models often making an orthogonal assumption about the dimensional structure of the data. One reason for this assumption is because of the indeterminacy issue in estimating the correlations among the dimensions in structures often specified to deal with sources of LID (e.g., bifactor and two-tier structures), and the assumption usually goes untested. Unfortunately, the mere fact that assessing these correlations is a challenge for some estimation methods does not mean that data seen in practice support such orthogonal structure. In this paper, a Bayesian multilevel multidimensional IRT model for locally dependent data is presented. This model can test whether item response data violate the orthogonal assumption that many IRT models make about the dimensional structure of the data when addressing sources of LID, and this test is carried out at the dimensional level while accounting for sampling clusters. Simulations show that the model presented is effective at carrying out this task. The utility of the model is also illustrated on an empirical data set.     

题组反应理论及其在中学英语考试中的应用研究

题组作为众多测验中的一种常见题型,由于项目间存在一定程度的依赖性而违背了局部独立性假设,若用项目反应模型进行参数估计将会出现较大的偏差.题组反应理论将被试与题组的交互作用纳入到模型中,解决了项目间相依性的问题.笔者对题组反应理论的发展、基本原理及其相关研究进行了综述,并将其应用在中学英语考试中.与项目反应理论相对比,结果发现：（1）题组反应模型与项目反应模型在各参数估计值的相关系数较强,尤其是能力参数和难度参数;（2）在置信区间宽度的比较上,题组反应模型在各个参数上均窄于项目反应模型,即题组反应模型的估计精度优于项目反应模型.     

多维测验项目参数的估计：基于SEM与MIRT方法的比较

作者简要回顾了SEM框架下分类数据因素分析(CCFA)模型和MIRT框架下测验题目和潜在能力的关系模型, 对两种框架下的主要参数估计方法进行了总结。通过模拟研究, 比较了SEM框架下WLSc和WLSMV估计方法与MIRT框架下MLR和MCMC估计方法的差异。研究结果表明：(1) WLSc得到参数估计的偏差最大, 且存在参数收敛的问题; (2)随着样本量增大, 各种项目参数估计的精度均提高, WLSMV方法与MLR方法得到的参数估计精度差异很小, 大多数情况下不比MCMC方法差; (3)除WLSc方法外, 随着每个维度测验题目的增多参数估计的精度逐渐增高; (4)测验维度对区分度参数和难度参数的影响较大, 而测验维度对项目因素载荷和阈值的影响相对较小; (5)项目参数的估计精度受项目测量维度数的影响, 只测量一个维度的项目参数估计精度较高。另外文章还对两种方法在实际应用中应该注意的问题提供了一些建议。     

IRT与MIRT在测验垂直等值中的应用

测验垂直等值是指将测试同一心理特质的不同水平的测验转换到同一个分数量尺上的过程。IRT与MIRT是实现垂直等值的主要方法。IRT无需假设被试的能力分布, 参数估计不依赖于样本, 是构建垂直量表的有效方法, 但测验不满足单维假设时其应用受到限制。MIRT结合IRT和因素分析的特点对IRT进行了拓展, 可更有效估计多维测验的项目参数和被试能力参数, 在垂直等值中有重要应用。已有研究主要探讨IRT和MIRT在垂直等值应用中的适用性、标定方法和参数估计方法, 比较研究两种方法的特性。未来研究应纳入更多变量条件进行比较研究, 拓展方法的应用。     

The Impact of Fallible Item Parameter Estimates on Latent Trait Recovery

In this paper we propose an upward correction to the standard error (SE) estimation of [^(q)]_ML\hat{\theta}_{\mathrm{ML}} , the maximum likelihood (ML) estimate of the latent trait in item response theory (IRT). More specifically, the upward correction is provided for the SE of [^(q)]_ML\hat{\theta}_{\mathrm{ML}} when item parameter estimates obtained from an independent pretest sample are used in IRT scoring. When item parameter estimates are employed, the resulting latent trait estimate is called pseudo maximum likelihood (PML) estimate. Traditionally, the SE of [^(q)]_ML\hat{\theta}_{\mathrm{ML}} is obtained on the basis of test information only, as if the item parameters are known. The upward correction takes into account the error that is carried over from the estimation of item parameters, in addition to the error in latent trait recovery itself. Our simulation study shows that both types of SE estimates are very good when θ is in the middle range of the latent trait distribution, but the upward-corrected SEs are more accurate than the traditional ones when θ takes more extreme values.     

适用于多维迫选测验的IRT计分模型

迫选(forced-choice, FC)测验由于可以控制传统李克特方法带来的反应偏差, 被广泛应用于非认知测验中, 而迫选测验的传统计分方式会产生自模式数据, 这种数据由于不适合于个体间的比较, 一直备受批评。近年来, 多种迫选IRT模型的发展使研究者能够从迫选测验中获得接近常模性的数据, 再次引起了研究者与实践人员对迫选IRT模型的兴趣。首先, 依据所采纳的决策模型和题目反应模型对6种较为主流的迫选IRT模型进行分类和介绍。然后, 从模型构建思路、参数估计方法两个角度对各模型进行比较与总结。其次, 从参数不变性检验、计算机化自适应测验(computerized adaptive testing, CAT)和效度研究3个应用研究方面进行述评。最后提出未来研究可以在模型拓展、参数不变性检验、迫选CAT测验和效度研究4个方向深入。     

A dual process item response theory model for polytomous multidimensional forced-choice items

The use of multidimensional forced-choice (MFC) items to assess non-cognitive traits such as personality, interests and values in psychological tests has a long history, because MFC items show strengths in preventing response bias. Recently, there has been a surge of interest in developing item response theory (IRT) models for MFC items. However, nearly all of the existing IRT models have been developed for MFC items with binary scores. Real tests use MFC items with more than two categories; such items are more informative than their binary counterparts. This study developed a new IRT model for polytomous MFC items based on the cognitive model of choice, which describes the cognitive processes underlying humans' preferential choice behaviours. The new model is unique in its ability to account for the ipsative nature of polytomous MFC items, to assess individual psychological differentiation in interests, values and emotions, and to compare the differentiation levels of latent traits between individuals. Simulation studies were conducted to examine the parameter recovery of the new model with existing computer programs. The results showed that both statement parameters and person parameters were well recovered when the sample size was sufficient. The more complete the linking of the statements was, the more accurate the parameter estimation was. This paper provides an empirical example of a career interest test using four-category MFC items. Although some aspects of the model (e.g., the nature of the person parameters) require additional validation, our approach appears promising.     

Constant latent odds-ratios models and the mantel-haenszel null hypothesis

In the present paper, a new family of item response theory (IRT) models for dichotomous item scores is proposed. Two basic assumptions define the most general model of this family. The first assumption is local independence of the item scores given a unidimensional latent trait. The second assumption is that the odds-ratios for all item-pairs are constant functions of the latent trait. Since the latter assumption is characteristic of the whole family, the models are called constant latent odds-ratios (CLORs) models. One nonparametric special case and three parametric special cases of the general CLORs model are shown to be generalizations of the one-parameter logistic Rasch model. For all CLORs models, the total score (the unweighted sum of the item scores) is shown to be a sufficient statistic for the latent trait. In addition, conditions under the general CLORs model are studied for the investigation of differential item functioning (DIF) by means of the Mantel-Haenszel procedure. This research was supported by the Dutch Organization for Scientific Research (NWO), grant number 400-20-026.     

Bifactor models and rotations: exploring the extent to which multidimensional data yield univocal scale scores

The application of psychological measures often results in item response data that arguably are consistent with both unidimensional (a single common factor) and multidimensional latent structures (typically caused by parcels of items that tap similar content domains). As such, structural ambiguity leads to seemingly endless "confirmatory" factor analytic studies in which the research question is whether scale scores can be interpreted as reflecting variation on a single trait. An alternative to the more commonly observed unidimensional, correlated traits, or second-order representations of a measure's latent structure is a bifactor model. Bifactor structures, however, are not well understood in the personality assessment community and thus rarely are applied. To address this, herein we (a) describe issues that arise in conceptualizing and modeling multidimensionality, (b) describe exploratory (including Schmid-Leiman [Schmid & Leiman, 1957] and target bifactor rotations) and confirmatory bifactor modeling, (c) differentiate between bifactor and second-order models, and (d) suggest contexts where bifactor analysis is particularly valuable (e.g., for evaluating the plausibility of subscales, determining the extent to which scores reflect a single variable even when the data are multidimensional, and evaluating the feasibility of applying a unidimensional item response theory (IRT) measurement model). We emphasize that the determination of dimensionality is a related but distinct question from either determining the extent to which scores reflect a single individual difference variable or determining the effect of multidimensionality on IRT item parameter estimates. Indeed, we suggest that in many contexts, multidimensional data can yield interpretable scale scores and be appropriately fitted to unidimensional IRT models.     

Examining Nonnormal Latent Variable Distributions for Non-Ignorable Missing Data

Missing not at random (MNAR) modeling for non-ignorable missing responses usually assumes that the latent variable distribution is a bivariate normal distribution. Such an assumption is rarely verified and often employed as a standard in practice. Recent studies for “complete” item responses (i.e., no missing data) have shown that ignoring the nonnormal distribution of a unidimensional latent variable, especially skewed or bimodal, can yield biased estimates and misleading conclusion. However, dealing with the bivariate nonnormal latent variable distribution with present MNAR data has not been looked into. This article proposes to extend unidimensional empirical histogram and Davidian curve methods to simultaneously deal with nonnormal latent variable distribution and MNAR data. A simulation study is carried out to demonstrate the consequence of ignoring bivariate nonnormal distribution on parameter estimates, followed by an empirical analysis of “don’t know” item responses. The results presented in this article show that examining the assumption of bivariate nonnormal latent variable distribution should be considered as a routine for MNAR data to minimize the impact of nonnormality on parameter estimates.     

单维项目因素分析：CCFA与IRT估计方法的比较

当观测指标变量为二分分类数据时,传统的因素分析方法不再适用。作者简要回顾了SEM框架下的分类数据因素分析模型和IRT框架下的测验题目和潜在能力的关系模型,并对两种框架下主要采用的参数估计方法进行了总结。通过两个模拟研究,比较了SEM框架下GLSc和MGLSc估计方法与IRT框架下MML/EM估计方法的差异。研究结果表明：（1）三种方法中,GLSc得到参数估计的偏差最大,MGLSc和MML/EM估计方法相差不大;（2）随着样本量增大,各种项目参数估计的精度均提高;（3）项目因素载荷和难度估计的精度受测验长度的影响;（4）项目因素载荷和区分度估计的精度受总体因素载荷（区分度）高低的影响;（5）测验项目中阈值的分布会影响参数估计的精度,其中受影响最大的是项目区分度。（6）总体来看,SEM框架下的项目参数估计精度较IRT框架下项目参数估计的精度高。此外,文章还将两种方法在实际应用中应该注意的问题提供了一些建议。     

Scale Alignment in the Between-Item Multidimensional Partial Credit Model

In between-item multidimensional item response models, it is often desirable to compare individual latent trait estimates across dimensions. These comparisons are only justified if the model dimensions are scaled relative to each other. Traditionally, this scaling is done using approaches such as standardization—fixing the latent mean and standard deviation to 0 and 1 for all dimensions. However, approaches such as standardization do not guarantee that Rasch model properties hold across dimensions. Specifically, for between-item multidimensional Rasch family models, the unique ordering of items holds within dimensions, but not across dimensions. Previously, Feuerstahler and Wilson described the concept of scale alignment, which aims to enforce the unique ordering of items across dimensions by linearly transforming item parameters within dimensions. In this article, we extend the concept of scale alignment to the between-item multidimensional partial credit model and to models fit using incomplete data. We illustrate this method in the context of the Kindergarten Individual Development Survey (KIDS), a multidimensional survey of kindergarten readiness used in the state of Illinois. We also present simulation results that demonstrate the effectiveness of scale alignment in the context of polytomous item response models and missing data.     

Local homogeneity in latent trait models. A characterization of the homogeneous monotone irt model

The stochastic subject formulation of latent trait models contends that, within a given subject, the event of obtaining a certain response pattern may be probabilistic. Ordinary latent trait models do not imply that these within-subject probabilities are identical to the conditional probabilities specified by the model. The latter condition is called local homogeneity. It is shown that local homgeneity is equivalent to subpopulation invariance of the model. In case of the monotone IRT model, local homogeneity implies absence of item bias, absence of item specific traits, and the possibility to join overlapping subtests. The following characterization theorem is proved: the homogeneous monotone IRT model holds for a finite or countable item pool if and only if the pool is experimentally independent and pairwise nonnegative association holds in every positive subpopulation.This research was supported by the Dutch Interuniversity Graduate School of Psychometrics and Sociometrics. The authors wish to thank two reviewers for their thorough comments.     

A Note on Stochastic Ordering of the Latent Trait Using the Sum of Polytomous Item Scores

In contrast to dichotomous item response theory (IRT) models, most well-known polytomous IRT models do not imply stochastic ordering of the latent trait by the total test score (SOL). This has been thought to make the ordering of respondents on the latent trait using the total test score questionable and throws doubt on the justifiability of using nonparametric polytomous IRT models for ordinal measurement. We show that a broad class of polytomous IRT models has a weaker form of SOL, denoted weak SOL, and argue that weak SOL justifies ordering respondents on the latent trait using the total test score and, therefore, the use of nonparametric polytomous IRT models for ordinal measurement.     

The Assessment of Dimensionality for Use in Item Response Theory

The application of item response theory (IRT) models requires the identification of the data's dimensionality. A popular method for determining the number of latent dimensions is the factor analysis of a correlation matrix. Unlike factor analysis, which is based on a linear model, IRT assumes a nonlinear relationship between item performance and ability. Because multidimensional scaling (MDS) assumes a monotonic relationship this method may be useful for the assessment of a data set's dimensionality for use with IRT models. This study compared MDS, exploratory and confirmatory factor analysis (EFA and CFA, respectively) in the assessment of the dimensionality of data sets which had been generated to be either one- or two-dimensional. In addition, the data sets differed in the degree of interdimensional correlation and in the number of items defining a dimension. Results showed that MDS and CFA were able to correctly identify the number of latent dimensions for all data sets. In general, EFA was able to correctly identify the data's dimensionality, except for data whose interdimensional correlation was high.     

A Note on the Conversion of Item Parameters Standard Errors

The relations among alternative parameterizations of the binary factor analysis (FA) model and two-parameter logistic (2PL) item response theory (IRT) model have been thoroughly discussed in literature. However, the conversion formulas widely available are mainly for transforming parameter estimates from one parameterization to another. There is a lack of discussion about the standard error (SE) conversion among different parameterizations, when SEs of IRT model parameters are often of immediate interest to practitioners. This article provides general formulas for computing the SEs of transformed parameter values, when these parameters are transformed from FA to IRT models. These formulas are suitable for unidimensional 2PL, multidimensional 2PL, and bi-factor 2PL models. A simulation study is conducted to verify the formula by providing empirical evidence. A real data example is given in the end for an illustration.     

混合IRT潜在模型及其应用轨迹

项目反应理论是测量被试潜在特质的现代测量理论, 潜在类别分析是基于模型的潜在特质分类技术。混合项目反应理论将项目反应理论与潜在类别分析相结合, 能够同时对被试分类并量化其潜在特质。在阐述混合项目反应理论概念、原理的基础上, 介绍了MRM、mNRM和mPCM等几种常见混合模型及其参数估计方法, 并从心理与行为特征分类、项目功能差异检测、测验效度评价等方面评述了其在心理测验中的应用发展轨迹。